Table of Contents
International Journal of Vehicular Technology
Volume 2011, Article ID 934023, 9 pages
http://dx.doi.org/10.1155/2011/934023
Research Article

Power Balance Control in an AC/DC/AC Converter for Regenerative Braking in a Two-Voltage-Level Flywheel-Based Driveline

Division for Electricity, Department of Engineering Sciences, Uppsala University, P.O. Box 534, 75121 Uppsala, Sweden

Received 10 May 2011; Revised 2 August 2011; Accepted 24 August 2011

Academic Editor: Shinsuke Hara

Copyright © 2011 Janaína G. Oliveira et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Fairley, “Speed bumps ahead for electric-vehicle charging,” IEEE Spectrum, vol. 47, no. 1, pp. 13–14, 2010. View at Publisher · View at Google Scholar
  2. M. Ye, Z. Bai, and B. Cao, “Robust control for regenerative braking of battery electric vehicle,” IET Control Theory and Applications, vol. 2, no. 12, pp. 1105–1114, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. H. Seki, K. Ishihara, and S. Tadakuma, “Novel regenerative braking control of electric power-assisted wheelchair for safety downhill road driving,” IEEE Transactions on Industrial Electronics, vol. 56, no. 5, pp. 1393–1400, 2009. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Pay and Y. Baghzouz, “Effectiveness of battery-supercapacitor combination in electric vehicles,” in Proceedings of the IEEE Bologna Power Tech Conference, vol. 3, pp. 1–6, Bologna, Italy, 2003. View at Publisher · View at Google Scholar
  5. T. A. Smith, J. P. Mars, and G. A. Turner, “Using supercapacitors to improve battery performance,” in Proceedings of the 33rd Annual IEEE Power Electronics Specialists Conference (PESC '02), pp. 124–128, Queensland, Australia, 2002. View at Publisher · View at Google Scholar
  6. Y. P. Yang, J. Liu, and T. Hu, “An energy management system for a directly-driven electric scooter,” Energy Conversion and Management, vol. 52, no. 1, pp. 621–629, 2011. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Dixon, M. Ortuzar, and E. Wiechmann, Regenerative Braking for an Electric Vehicle Using Ultracapacitors and a Buck-Boost Converter, International Electric Vehicle Symposium, Montreal, Canada, 2000.
  8. I. Hadjipaschalis, A. Poullikkas, and V. Efthimiou, “Overview of current and future energy storage technologies for electric power applications,” Renewable and Sustainable Energy Reviews, vol. 13, no. 6-7, pp. 1513–1522, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. G. Pistoia, Battery Operated Devices and Systems, Elsevier, New York, NY, USA, 2008.
  10. J. Cibulka, “Kinetic energy recovery system by means of flywheel energy storage,” Advanced Engineering, vol. 3, no. 1, pp. 27–38, 2009. View at Google Scholar
  11. A. Barin, L. N. Canha, A. R. Abaide, and K. F. Magnago, “Selection of storage energy technologies in a power quality scenario the AHP and the fuzzy logic,” in Proceedings of the 35th Annual Conference of the IEEE Industrial Electronics Society (IECON '09), pp. 3615–3620, Porto, Portugal, November 2009. View at Publisher · View at Google Scholar
  12. M. Gasser, M. Riediker, L. Mueller et al., “Toxic effects of brake wear particles on epithelial lung cells in vitro,” Particle and Fibre Toxicology, vol. 6, no. 30, 2009. View at Publisher · View at Google Scholar · View at PubMed
  13. Z. Junzhi, L. Xin, C. Shanglou, and Z. Pengjun, “Coordinated control for regenerative braking system,” in Proceedings of the IEEE Vehicle Power and Propulsion Conference (VPPC '08), pp. 1–6, Hei Longjiang, China, September 2008. View at Publisher · View at Google Scholar
  14. J. Larminie and J. Lowry, Electric Vehicle Technology Explained, John Wiley & Sons, Chichester, UK, 2003.
  15. M. K. Yoong, Y. H. Gan, G. D. Gan et al., “Studies of regenerative braking in electric vehicle,” in Proceedings of the IEEE Sustainable Utilization and Development in Engineering and Technology Conference (STUDENT '10), Kuala Lumpur, Malaysia, 2010. View at Publisher · View at Google Scholar
  16. P. Clarke, T. Muneer, and K. Cullinane, “Cutting vehicle emissions with regenerative braking,” Transportation Research Part D: Transport and Environment, vol. 15, no. 3, pp. 160–167, 2010. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Abrahamsson, J. Santiago, J. G. Oliveira, J. Lundin, and H. Bernhoff, “Prototype of electric driveline with magnetically levitated double wound motor,” in Proceedings of the 19th International Conference on Electrical Machines (ICEM '10), pp. 1–5, Rome, Italy, September 2010. View at Publisher · View at Google Scholar
  18. J. Lundin, Flywheel in an all-electric propulsion system, Licentiate thesis, Uppsala University, Uppsala, Sweden, 2011.
  19. J. Santiago, A. Larsson, and H. Bernhoff, “Dual voltage driveline for vehicle applications,” International Journal of Emerging Electric Power Systems, vol. 11, no. 3, 1, 2010. View at Publisher · View at Google Scholar
  20. W. Chien and Y. Tzou, “Analysis and design on the reduction of DC-link electrolytic capacitor for AC/DC/AC converter applied to AC motor drives,” in Proceedings of the 29th Annual IEEE Power Electronics Specialists Conference (PESC '98), vol. 1, pp. 275–279, Hsinchu, Taiwan, 1998.
  21. B. Wang and G. Venkataramanan, “Dynamic voltage restorer utilizing a matrix converter and flywheel energy storage,” IEEE Transactions on Industry Applications, vol. 45, no. 1, pp. 222–231, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. K. Rafal, M. Bobrowska, J. A. Barrena, and M. P. Kazmierkowski, “Component minimized AC/DC/AC converter with DC-link capacitors voltages balancing,” in Proceedings of the IEEE EUROCON, pp. 861–866, Saint Petersburg, Russia, 2009. View at Publisher · View at Google Scholar
  23. A. El Magri, F. Giri, A. Abouloifa, and F. Z. Chaoui, “Robust control of synchronous motor through AC/DC/AC converters,” Control Engineering Practice, vol. 18, no. 5, pp. 540–553, 2010. View at Publisher · View at Google Scholar
  24. L. Malesani, L. Rossetto, P. Tenti, and P. Tomasin, “AC/DC/AC PWM converter with reduced energy storage in the DC link,” IEEE Transactions on Industry Applications, vol. 31, no. 2, pp. 287–292, 1995. View at Publisher · View at Google Scholar · View at Scopus
  25. M. Jasinski, M. Malinowski, M. P. Kazmierkowski, H. C. Sorensen, E. Friis-Madsen, and D. Swierczynski, “Control of AC/DC/AC converter for multi MW wave dragon offshore energy conversion system,” in Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE' 07), pp. 2685–2690, Vigo, Spain, 2007. View at Publisher · View at Google Scholar
  26. J. S. Kim and S. K. Sui, “New control scheme for AC-DC-AC converter without DC link electrolytic capacitor,” in Proceedings of the 24th Annual IEEE Power Electronics Specialist Conference (PESC '93), pp. 300–306, 1993.
  27. J. Rodríguez, J. Pontt, P. Correa, P. Lezana, and P. Cortés, “Predictive power control of an AC/DC/AC converter,” in Proceedings of the 40th Annual Meeting IEEE Industry Applications Conference (IAS '05), pp. 934–939, Hong Kong, China, October 2005. View at Publisher · View at Google Scholar
  28. M. H. Rashid, Power Electronics Handbook, Academic Press, New York, NY, USA, 2001.
  29. S. Yongsug, V. Tijeras, and T. A. Lipo, “A control method in dq synchronous frame for PWM boost rectifier under generalized unbalanced operating conditions,” in Proceedings of the 33rd Annual IEEE Power Electronics Specialists Conference (PESC '02), vol. 3, pp. 1425–1430, Queensland, Australia, 2002.
  30. K. S. Low, M. F. Rahman, and K. W. Lim, “The dq transformation and feedback linearization of a permanent magnet synchronous motor,” in Proceedings of the 1995 International Conference on Power Electronics and Drive Systems, vol. 1, pp. 292–296, Singapore, 1995.
  31. L. I-Kuei, “A concordance correlation coefficient to evaluate reproducibility,” Biometrics, vol. 45, no. 1, pp. 255–268, 1989. View at Google Scholar · View at Scopus