Table of Contents
International Journal of Vehicular Technology
Volume 2015 (2015), Article ID 192958, 7 pages
http://dx.doi.org/10.1155/2015/192958
Research Article

New Method of Car Body Panel External Straightening: Tools of Method

Kharkov National Automobile and Highway University, Petrovskogo Street 25, Kharkov 61002, Ukraine

Received 23 April 2015; Revised 29 June 2015; Accepted 1 July 2015

Academic Editor: Abdelaziz Bensrhair

Copyright © 2015 Andrey Gnatov and Schasyana Argun. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. V. Psyk, D. Risch, B. L. Kinsey, A. E. Tekkaya, and M. Kleiner, “Electromagnetic forming—a review,” Journal of Materials Processing Technology, vol. 211, no. 5, pp. 787–829, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. Laboratory of the Electromagnetic Technologies, “Materials site,” 2015, http://electromagnetic.comoj.com.
  3. Welcome to BETAG Innovation, 2014, http://www.beulentechnik.com/.
  4. D. Taylor, Paint & Body Handbook, HP Trade, 1994.
  5. J. Haynes, The Haynes Automotive Body Repair & Painting Manual, Haynes Manuals N. America, 1st edition, 1989.
  6. K. Faes, O. Zaitov, and W. De Waele, “Electromagnetic pulse crimping of axial form fit joints,” in Proceedings of the 5th International Conference on High Speed Forming, pp. 229–242, Dortmund, Germany, April 2012.
  7. D. Risch, A. Brosius, and M. Kleiner, “Influence of the workpiece stiffness on the electromagnetic sheet metal forming process into dies,” Journal of Materials Engineering and Performance, vol. 16, no. 3, pp. 327–330, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. D. A. Oliveira, M. J. Worswick, M. Finn, and D. Newman, “Electromagnetic forming of aluminum alloy sheet: free-form and cavity fill experiments and model,” Journal of Materials Processing Technology, vol. 170, no. 1-2, pp. 350–362, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. H. Huh, S. Jeong, G. W. Bahng, K. S. Chae, and C. G. Kim, “Standard uncertainty evaluation for dynamic tensile properties of auto-body steel-sheets,” Experimental Mechanics, vol. 54, no. 6, pp. 943–956, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Liu, L. Huang, and J. Li, “An experiment and simulation study of the rebound effect in electromagnetic forming process,” in Proceedings of the 6th International Conference on High Speed Forming, pp. 131–140, Dortmund, Germany, May 2014.
  11. Y. V. Batygin, S. F. Golovashchenko, and A. V. Gnatov, “Pulsed electromagnetic attraction of sheet metals—fundamentals and perspective applications,” Journal of Materials Processing Technology, vol. 213, no. 3, pp. 444–452, 2013. View at Publisher · View at Google Scholar · View at Scopus