Table of Contents
International Journal of Vehicular Technology
Volume 2016, Article ID 1768512, 8 pages
http://dx.doi.org/10.1155/2016/1768512
Research Article

A Modified Hybrid III 6-Year-Old Dummy Head Model for Lateral Impact Assessment

1Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia
2Department of Mechanical Engineering, Bayero University, PMB 3011, Kano, Nigeria
3Department of Orthopaedic Surgery, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia (UPM), 43400 Serdang, Selangor, Malaysia

Received 29 July 2015; Revised 24 December 2015; Accepted 24 December 2015

Academic Editor: Radu Danescu

Copyright © 2016 I. A. Rafukka et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. M. Loyd, R. W. Nightingale, Y. Song et al., “Impact properties of adult and ATD heads,” in Proceedings of the International Research Council on the Biomechanics of Injury (IRCOBI '12), vol. 507, pp. 552–564, Dublin, Ireland, September 2012.
  2. A. M. Loyd, Studies of the human head from neonate to adult: an inertial, geometrical and structural analysis with comparisons to the ATD head [P.hD. Dissertation], Department of Biomedical Engineering, Duke University, Durham, NC, USA, 2011.
  3. M. R. van Ratingen, D. Twisk, M. Schrooten, M. C. Beusenberg, A. Barnes, and G. Platten, “Biomechanically based design and performance targets for a 3-year old child crash dummy for frontal and side impact,” SAE Technical Paper 973316, SAE, 1997. View at Google Scholar
  4. First Technology Safety System (FTSS), LS-DYNA Model of the Hybrid III 3-Year Old Child Dummy User Manual, Version 4.0, First Technology Safety System (FTSS), Plymouth, Mich, USA, 2008.
  5. LSTC, LSTC Hybrid III 6 Year Old Finite Element Model Documentation, LSTC, 2013.
  6. V. R. Hodgson and L. M. Thomas, “Comparison of head acceleration injury indices in cadaver skull fracture,” SAE Technical Paper 710854, 1971. View at Publisher · View at Google Scholar
  7. F. J. Lopez-Valdes, J. Forman, R. Kent, O. Bostrom, and M. Segui-Gomez, “A comparison between a child-size PMHS and the Hybrid III 6 YO in a sled frontal impact,” Annals of Advances in Automotive Medicine, vol. 53, pp. 237–246, 2009. View at Google Scholar
  8. J. Wu, L. Cao, M. P. Reed, and J. Hu, “A simulation study of spine biofidelity in the Hybrid-III 6-year-old ATD,” Traffic Injury Prevention, vol. 14, no. 4, pp. 397–404, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Hu, K. D. Klinich, M. P. Reed, M. Kokkolaras, and J. D. Rupp, “Development and validation of a modified Hybrid-III six-year-old dummy model for simulating submarining in motor-vehicle crashes,” Medical Engineering and Physics, vol. 34, no. 5, pp. 541–551, 2012. View at Publisher · View at Google Scholar · View at Scopus
  10. K. Weber, “Crash protection for child passengers: a review of the best practice,” UMTRI Research Review, vol. 31, no. 3, pp. 1–28, 2000. View at Google Scholar
  11. C. Maurath, S. Guha, D. Bhalsod et al., “Overview of LSTC's LS-DYNA anthropomorphic models,” in Proceedings of the 11th International LS-DYNA Conference, pp. 41–52, Dearborn, Mich, USA, June 2010.
  12. K. Mizuno, K. Iwata, T. Deguchi, T. Ikami, and M. Kubota, “Development of a three-year-old child FE model,” Traffic Injury Prevention, vol. 6, no. 4, pp. 361–371, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. T. Koizumi, N. Tsujiuchi, and Y. Uchida, “Impact injury rating of child FE human model for 3-year-old,” in Proceedings of the IMAC-XXIII: Conference and Exposition on Structural Dynamics, Orlando, Fla, USA, January-February 2005.
  14. B. Been, R. Meijer, F. Bermond et al., “WorldSID small female side impact dummy specifications and prototype evaluation,” in Proceedings of the 20th Enhanced Safety of Vehicles Conference (ESV '07), Lyon, France, 2007.
  15. J. Ash, Y. Abdelilah, J. Crandall, D. Parent, C. Sherwood, and D. Kallieris, “Comparison of anthropomorphic test dummies with a pediatric cadaver restrained by a three-point belt in frontal sled tests,” in Proceedings of the 21st International Technical Conference on the Enhanced Safety of Vehicles (ESV '09), pp. 1–14, Stuttgart, Germany, June 2009.
  16. R. Meijer, R. Wisgerhof, J. Wismans, and B. Been, “Scaling head-neck response data and derivation of 5th percentile female side-impact dummy head-neck response requirements in NBDL test conditions,” International Journal of Crashworthiness, vol. 15, no. 1, p. 115, 2010. View at Google Scholar
  17. H. J. Mertz, A. L. Irwin, J. W. Melvin, R. L. Stanaker, and M. S. Beebe, “Size, weight and biomechanical impact response requirements for adult size small female and large male dummies,” SAE Technical Paper 890756, 1989. View at Publisher · View at Google Scholar
  18. A. Irwin and H. J. Mertz, “Biomechanical basis for the CRABI and Hybrid III child dummies,” SAE Technical Paper 973317, 1997. View at Publisher · View at Google Scholar
  19. G. K. McPherson and T. J. Kriewall, “The elastic modulus of fetal cranial bone: a first step towards an understanding of the biomechanics of fetal head molding,” Journal of Biomechanics, vol. 13, no. 1, pp. 9–16, 1980. View at Publisher · View at Google Scholar · View at Scopus
  20. R. P. Hubbard, “Flexure of layered cranial bone,” Journal of Biomechanics, vol. 4, no. 4, pp. 251–263, 1971. View at Publisher · View at Google Scholar · View at Scopus
  21. K. D. Klinich, R. A. Saul, G. Auguste, S. Backaitis, and M. Kleinberger, Techniques for Developing Child Dummy Protection Reference Values, National Highway Traffic Safety Administration, 1996.
  22. R. G. Snyder, L. W. Schneider, C. L. Owings, H. M. Reynolds, H. Golomb, and A. Schork, “Anthopometry of infants, children and youth to age 18 for product safety design,” Measurement Final Report, 1977. View at Google Scholar
  23. J. O. Hallquist, DYNA Theory Manual, Livermore Software Technology Corporation (LSTC), 2006.
  24. LS-DYNA, LS-DYNA Model of the Hybrid III 3-Year Old Child Dummy User Manual 4.0, LS-DYNA Model Version, LS-DYNA, 2008.