Table of Contents
ISRN Materials Science
Volume 2011, Article ID 121486, 14 pages
http://dx.doi.org/10.5402/2011/121486
Research Article

Finite Element Modelling of Shock-Induced Damages on Ceramic Hip Prostheses

Biomechanics and Biomaterials Department, Center for Health Engineering, UMR CNRS 5146, IFR 143, Ecole Nationale Supérieure des Mines de Saint-Etienne, 158 cours Fauriel, 42023 Saint-Etienne, France

Received 5 April 2011; Accepted 20 May 2011

Academic Editors: J. Provis and R. Rodríguez

Copyright © 2011 Juliana Uribe et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Boutin, “Arthroplastie totale de hanche par prothèse en alumine frittée,” Revue de Chirurgie Orthopédique et Réparatrice de l'Appareil Moteur, vol. 58, no. 3, pp. 229–246, 1972. View at Google Scholar
  2. P. Boutin and D. Blanquaert, “Le frottement alumine-alumine en chirurgie de la hanche. 1205 arthroplasties totales: Avril 1970–Juin 1980,” Revue de Chirurgie Orthopédique et Réparatrice de l'Appareil Moteur, vol. 67, pp. 279–287, 1970. View at Google Scholar
  3. P. Boutin, P. Christel, J. M. Dorlot et al., “The use of dense alumina-alumina ceramic combination in total hip replacement,” Journal of Biomedical Materials Research, vol. 22, no. 12, pp. 1203–1232, 1988. View at Google Scholar · View at Scopus
  4. P. Bizot, R. Nizard, and L. Sedel, “Le couple alumine-alumine dans les prothèses totales de hanche. de la théorie a la pratique,” Online edition, 2010, http://www.maitrise-orthop.com/viewPage.do?id=619.
  5. E. A. Magnissalis, T. A. Xenakis, and C. Zacharis, “Wear of retrieved ceramic THA components—four matched pairs retrieved after 5–13 years in service,” Journal of Biomedical Materials Research, vol. 58, no. 5, pp. 593–598, 2001. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Nevelos, E. Ingham, C. Doyle et al., “Microseparation of the centers of alumina-alumina artificial hip joints during simulator testing produces clinically relevant wear rates and patterns,” Journal of Arthroplasty, vol. 15, no. 6, pp. 793–795, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. T. Shishido, K. Yamamoto, S. Tanaka, T. Masaoka, I. C. Clarke, and P. Williams, “A study of a retrieved implant of ceramic-on-ceramic total hip arthroplasty,” Journal of Arthroplasty, vol. 21, no. 2, pp. 294–298, 2006. View at Google Scholar
  8. T. Yamamoto, S. Masanobu, U. Masaru, H. Takehito, T. Yusuke, and Y. Kazuo, “Wear analysis of retrieved ceramic-on-ceramic articulations in total hip arthroplasty: femoral head makes contact with the rim of the socket outside of the bearing surface,” Journal of Biomedical Materials Research B, vol. 73, no. 2, pp. 301–307, 2005. View at Google Scholar
  9. A. V. Lombardi, T. H. Mallory, D. A. Dennis, R. D. Komistek, R. A. Fada, and E. J. Northcut, “An in vivo determination of total hip arthroplasty pistoning during activity,” Journal of Arthroplasty, vol. 15, no. 6, pp. 702–709, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. Tzanck-Ortho, 2007, http://patient.tzanck-ortho.fr/page5/page24/page24.html.
  11. J. P. Paul, “Comparison of EMG signals from leg muscles with the corresponding force actions calculated from walk path measurements,” Human Locomotor Engineering, vol. 48, pp. 6–26, 1971. View at Google Scholar
  12. J. P. Paul and D. A. McGrouther, “Forces transmitted at the hip and knee joint of normal and disabled persons during a range of activities,” Acta Orthopaedica Belgica, vol. 41, no. 1, pp. 78–88, 1975. View at Google Scholar · View at Scopus
  13. T. P. Andriacchi and D. E. Hurwitz, “Gait biomechanics and the evolution of total joint replacement,” Gait and Posture, vol. 5, no. 3, pp. 256–264, 1997. View at Publisher · View at Google Scholar · View at Scopus
  14. J. Hausselle, M. Dursapt, J. Stolarz, and B. Forest, “Shock induced damages on hip prostheses,” in Proceedings of the 20th European Conference on Biomaterials, 2006.
  15. J. Chevalier, C. Olagnon, G. Fantozzi, and B. Cales, “Subcritical crack growth and thresholds in a 3Y-TAP ceramic under static and cyclic loading conditions,” Ceramics International, vol. 23, no. 3, pp. 263–266, 1997. View at Google Scholar · View at Scopus
  16. J. Chevalier, C. Olagnon, and G. Fantozzi, “Crack propagation and fatigue in zirconia-based composites,” Composites A, vol. 30, no. 4, pp. 525–530, 1999. View at Publisher · View at Google Scholar · View at Scopus
  17. A. H. De Aza, J. Chevalier, G. Fantozzi, M. Schehl, and R. Torrecillas, “Crack growth resistance of alumina, zirconia and zirconia toughened alumina ceramics for joint prostheses,” Biomaterials, vol. 23, no. 3, pp. 937–945, 2002. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Hausselle, Etude de la dégradation par chocs de têtes et cupules de prothèses de hanche en biocéramique, Ph.D. thesis, SGM, 2007, http://tel.archives-ouvertes.fr/docs/00/48/94/72/PDF/J-Hausselle-071213.pdf.
  19. “La théorie du chaos,” Ed Flammarion, Manchecourt, 1987.
  20. M.T. Todinov, “Probability of fracture initiated by defects,” Materials Science and Engineering A, vol. 27, no. 1-2, pp. 39–47, 2000. View at Google Scholar
  21. M.T. Todinov, “Equations and a fast algorithm for determining the probability of failure initiated by flaws,” International Journal of Solids and Structures, vol. 43, no. 17, pp. 5182–5195, 2006. View at Google Scholar
  22. W. L. Walter, G. M. Insley, W. K. Walter, and M. A. Tuke, “Edge loading in third generation alumina ceramic-on-ceramic bearings: stripe wear,” Journal of Arthroplasty, vol. 19, no. 4, pp. 402–413, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Manaka, I. C. Clarke, K. Yamamoto, T. Shishido, A. Gustafson, and A. Imakiire, “Stripe wear rates in alumina THR—comparison of microseparation simulator study with retrieved implants,” Journal of Biomedical Materials Research B, vol. 69, no. 2, pp. 149–157, 2004. View at Google Scholar · View at Scopus
  24. J. Hausselle, S. Drapier, J. Geringer, M. Dursapt, J. Stolarz, and B. Forest, “Flaws growth modelling in zirconia acetabular cups of hip prostheses under microseparation,” Mecanique et Industries, vol. 9, no. 2, pp. 153–158, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. W. Brodner, A. Grübl, R. Jankovsky, V. Meisinger, S. Lehr, and F. Gottsauner-Wolf, “Cup inclination and serum concentration of cobalt and chromium after metal-on-metal total hip arthroplasty,” Journal of Arthroplasty, vol. 19, no. 8, pp. 66–70, 2004. View at Publisher · View at Google Scholar · View at Scopus
  26. F. J. Kummer, S. Shah, S. Iyer, and P. E. DiCesare, “The effect of acetabular cup orientations on limiting hip rotation,” Journal of Arthroplasty, vol. 14, no. 4, pp. 509–513, 1999. View at Publisher · View at Google Scholar · View at Scopus
  27. M. J. H. McCarthy and M. Halawa, “Lining up the liner. 2 case reports of early ceramic liner fragmentation,” Journal of Arthroplasty, vol. 22, no. 8, pp. 1217–1222, 2007. View at Publisher · View at Google Scholar · View at Scopus