Abstract

The first cyclopenta[b]benzofuran derivative, rocaglamide, from Aglaia elliptifolia, was found to exhibit considerable insecticidal activities and excellent potential as a therapeutic agent candidate in cancer chemotherapy; the genus Aglaia has been subjected to further investigation. Both the structural complexity of rocaglamide and its significant activity make it an attractive synthetic target. Stereoselective synthesis of the dense substitution pattern of these targets is a formidable synthetic challenge: the molecules bear five contiguous stereocenters and cis aryl groups on adjacent carbons. In past years of effort, only a handful of completed total syntheses have been reported, evidence of the difficulties associated with the synthesis of rocaglate natural products. The advance on total synthesis of rocaglamide was mainly reviewed from intramolecular cyclization and biomimetic cycloaddition approach.

1. Introduction

During the past few years, indigenous to southeast Asia, the plant genus Aglia includes several species that produce a range of cyclopenta[b]tetrahydrobenzofuran containing metabolites [13], including rocaglamide (1), isolated from the roots and stems of Aglia elliptifolia by King et al. [4]. King’s initial report indicated that rocaglamide showed significant in vivo activity in P388 lymphocytic leukemia-infected mice [4]. Since then, rocaglamide and related compounds have shown cytostatic, and cytotoxic activity against a variety of human cancer cell lines, with IC50 values in the range 1.0–6.0 ng/mL [59], has attracted more attention in recent years because of its insecticidal and growth inhibitory activity [1015]. In order to be useful as drugs, a constant supply of such compounds in a large quantity is required. However, their natural abundance in the plant is quite low, and large-scale isolation from natural sources may not be feasible. Chemical synthesis, either total- or semisynthesis, is an option to produce this type of compounds. Both the structural complexity of rocaglamide and its significant activity make it an attractive synthetic target. Stereoselective synthesis of the dense substitution pattern of these targets is a formidable synthetic challenge: the molecules bear five contiguous stereocenters and cis aryl groups on adjacent carbons. In past years of effort, only a handful of completed total syntheses have been reported, evidence of the difficulties associated with the synthesis of rocaglate natural products. In the present work, several total synthetic approaches of rocaglamide will be reviewed (Scheme 1).

239817.sch.001

2. Intramolecular Cyclization Approaches

2.1. Synthesis of Di-Epi-Rocaglamide

An earlier attempt to synthesize rocaglamide (1) by Kraus and Sy in 1989 resulted in the synthesis of the di-epi analog of rocaglamide (6), as shown in Scheme 2 [16]. Michael addition of benzofuranone 2 to cinnamonitrile 3 gave keto-nitrile 4 in a 5 : 1 diastereomeric ratio. The major isomer was used to prepare 5 via an SmI2-mediated cyclization, followed by the introduction of the dimethylcarboxamido group in six steps to give 6. Although the investigators did not succeed in synthesizing rocaglamide (1), this approach was the first to utilize pinacolic coupling to generate the cyclopenta[b]benzofuran skeleton. Intramolecular pinacolic coupling later became a routine methodology used by other groups in the synthesis of rocaglamide and rocaglate derivatives [1720]. 2,3-Di-epi-rocaglamide (6) is an interesting compound that can be used in the SAR study of rocaglamide derivatives.

239817.sch.002
2.2. Synthesis of Racemic (±)-Rocaglamide

Davey and Taylor [21] were the first research group to utilize benzofuranone 2 as the precursor in the synthesis of cyclopenta[b]benzofuran skeleton. Treatment of benzofuranone 2 with NaH followed by iododithiane 7 gave the C-alkylated product 8, which, through a direct 1,3-dithiane lithiation and an intramolecular carbonyl addition gave the cyclized product 9 as shown in Scheme 3. In order to complete the synthesis of rocaglamide (1), all that remained were dithiane hydrolysis, introduction of the C-2 dimethylcarboxamide group, and carbonyl reduction. However, as reported in a follow-up publication, hydrolysis of dithiane 9 failed to give rise to the required β-phenyl isomer, which has the right stereochemistry for rocaglamide type compounds [18]. Under different reaction conditions, only the α-phenyl isomer was obtained in very low yield, and attempts to invert the stereochemistry also failed [18].

239817.sch.003

Taylor et al. [17, 18] then followed an alternative synthetic strategy utilizing the intramolecular keto-aldehyde pinacolic coupling as outlined in Scheme 4. Michael addition of the benzofuranone 2 to cinnamaldehyde (11), followed by SmI2-mediated intramolecular pinacolic coupling of ketoaldehyde 12, gave diols 13a and 13b, which could be separated by chromatography. Swern oxidation of diol 13b yielded ketone 14, which was converted into β-keto ester 15 using the CS2-based procedure as utilized by Kraus and Sy [16]. The keto ester 15 was then converted into ketoamide 16, followed by a stereoselective reduction with Me4NBH(OAc)3 to give (±)-rocaglamide (1).

239817.sch.004

In 2001, Dobler et al. modified Taylor’s method [18, 20] to give a higher overall yield of rocaglamide (40%) in a fewer number of steps, as outlined in Scheme 5 [22]. Following Taylor’s scheme, aldehyde was synthesized in 57% yield [18, 20]. Dobler et al. then proceeded with an umpolung sequence, where aldehyde 18b was subjected to treatment with TMSCN to give the cyanohydrin 19 in a quantitative yield, followed by a deprotection to give ketone 14 [22]. Compared to Taylor’s scheme, Dobler’s method is compatible with substituents sensitive to reduction. For the introduction of the dimethylcarboxamide group, Dobler et al. utilized Styles reagent to convert the ketone 14 directly to ketomide 16 [22]. In the final reduction step, both the groups of Taylor and Dobler used Me4NBH(OAc)3 to give an 81% yield (Taylor) [18] and a 95% yield (Dobler) [22] of racemic (±)-rocaglamide (1) (the yield is calculated from ketomide 16).

239817.sch.005

In 2008, Qin’s group synthesized (±)-rocaglamide and its 2,3-di-epi analogue by introducing the strategy of intramolecular reductive coupling to construct the cyclopenta[b]benzofuran skeleton [23], the shortest and most efficient synthetic method hitherto was now established to rocaglamide 1 and its 2,3-di-epi analogue in racemic form, as outlined in Scheme 6. Michael addition of the benzofuranone (2) to methyl α-formylcinnaminate (20), followed by SmI2-mediated intramolecular keto-ester coupling, gave β-keto ester 15, amination of the ester intermediate, and reduction of carbonyl with Me4NBH(OAc)3 to give (±)-rocaglamide (1).

239817.sch.006

In 2009, Frontier group reported the total synthesis of aglafolin, rocagloic acid, and rocaglamide using Nazarov cyclization initiated by peracid oxidation (Scheme 7) [24]. Alkylation of benzofuranone (2) using vinyl magnesium bromide was followed by osmylation and periodate cleavage of the resulting 3-vinyl benzofuran to give aldehyde 22. Alkylation with phenylacetylene and protection of the resultant propargyl alcohol with ethyl iodide and p-methoxybenzyl chloride gave propargyl ethers 23a and 23b, respectively. Deprotonation at the propargylic position of 23 with tertbutyllithium gave rise to an allenyl anion, which was trapped with tri-n-butyltin chloride to give stannyl alkoxyallene 24 [25]. Treatment of 24 with excess m-CPBA gave 25, and treatment of 25b with excess DDQ gave diosphenol 26 in excellent yield. Enol 26 was converted to triflate and then subjected to palladium-mediated carbonylation to install the final C-C linkage and produced 27. Hydrogenation of 27 over PtO2 gave 15 as a single diastereomer. Templated reduction of the ketone afforded the natural product aglafolin and saponification followed by amide formation furnished (±)-rocaglamide (1).

239817.sch.007

3. Biomimetic Cycloaddition Approaches

Trost et al. were successful in the enantioselective synthesis of (−)-rocaglamide (1), by utilizing a novel DDQ- (2,3-dichloro-5,6-dicyano-1,4-benzoquinone) mediated oxidative cyclization to generate the dihydrobenzofuran ring [26]. Some important steps for the formation of key intermediates are shown in Scheme 8. Trost et al. employed a Pd-catalyzed asymmetric [3+2] cycloaddition of TMM [(trimethylsilyl) methyl] precursor (30) and oxazepinedione (31) to give cyclopentanone (32), followed by condensation with dimethylphloroglucinol to give the adduct (33). A DDQ-mediated oxidative cyclization gave the dihydrobenzofuran ring (34), and the adjustment of the stereochemistry proceeded through the enone 35. Amidation and desylation of (35) gave (36) and 37, and reduction of 37 yielded (−)-rocaglamide (1), which was identical to the natural product as shown by its chromatographic, spectroscopic, and physical properties. This synthetic method gave the enantiomerically pure rocaglamide and consisted of 17 steps with <6% overall yield [26].

239817.sch.008

In 2004, Gerard group introduced a biomimetic approach to the rocaglates employing photogeneration of oxidopyryliums derived from 3-hydroxyflavones (Scheme 9) [27]. [3+2] cycloaddition of photoirradiation (uranium filter) of kaempferol derivative 3-hydroxyflavone 38 and methyl cinnamate 39 (MeOH, °C) afforded the aglain 41, as well as benzo[b]cyclobutapyran-8-one 42 (33% and 17%, resp.) after purification on SiO2. Basic conditions (NaOMe, MeOH) were used to perform α-ketol rearrangement of both 41 and 42 which afforded a mixture of endo and exo cycloadducts 15 in which the endo isomer was obtained as a mixture of keto-enol tautomers. Reduction of 15 afforded (±)-methyl rocaglate 43 (51%) and the corresponding exo stereoisomer 44 (27%).

239817.sch.009

Subsequently, Gerard group completed the asymmetric synthesis of the rocaglamides by enantioselective photocycloaddition mediated by chiral Brønsted acids [28] (Scheme 10). The approach involves enantioselective [3+2] photocyclo-addition promoted by chiral Brønsted acids (TADDOLs) to afford an aglain precursor followed by a ketol shift/reduction sequence to the rocaglate core, and the highest enantioselectivity of (−)-rocaglamide was 89% ee.

239817.sch.0010

4. Other Synthetic Approaches

Bruce et al. synthesized the analogue of (±)-rocaglamide (1) by ten steps reactions from cyclopentanone, as shown in Scheme 11 [29]. A key feature of this route is a highly efficient intramolecular condensation reaction which cleanly leads to the tricyclic skeleton. In 2008, Giese and Moser [30] carried out stereoselective synthesis of the rocaglamide skeleton via a silyl vinylketene formation [4+1] annulation sequence (Scheme 12), and this novel approach affords the ABC ring system where the adjacent phenyl and aryl substituents of the C ring have the required cis relationship.

239817.sch.0011
239817.sch.0012

To summarize, in past years of effort, the synthetic methods of the rocaglamide have been developed rapidly, but valuable approaches are still few. At present, only intramolecular cyclization and biomimetic cycloaddition are effective and applied approaches for the synthesis of rocaglamide. It is very essential to perfect asymmetric Michael cycloaddition by the rigidity of molecular in intramolecular cyclization approach and to increase the synthetic total yield and region and stereoselectivity of the cycloaddition reaction in biomimetic cycloaddition approach. In the future, we believe more novel and effective approaches for the synthesis of rocaglamide will be developed.

Acknowledgments

The authors thank the National Natural Science Foundation of China (no. 20962006) and the Natural Science Foundation of the Guizhou Education Department (no. 20090021) for financial support.