Table of Contents
ISRN Mechanical Engineering
Volume 2011, Article ID 295904, 14 pages
http://dx.doi.org/10.5402/2011/295904
Research Article

Numerical Solution of the Kirchhoff Plate Bending Problem with BEM

Departamento de Materiales Compuestos, Centro de Investigación Científica de Yucatán A.C., Calle 43, No. 130, Colonia Chuburná de Hidalgo, 97200 Mérida, YC, Mexico

Received 27 January 2011; Accepted 24 March 2011

Academic Editors: T. K. Basak and S. Cartmell

Copyright © 2011 V. V. Zozulya. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. H. Aliabadi, “Applications in solids and structures,” in The Boundary Element Method, vol. 2, John Wiley &Sons, 2002. View at Google Scholar
  2. F. Hartmann, Introduction to Boundary Elements. Theory and Applications, Springer, 1989.
  3. D. E. Beskos, Ed., Boundary Element Analysis of Plates and Shells, Springer, Berlin, Germany, 1991.
  4. N. J. Altiero and D. L. Sikarskie, “A boundary integral method applied to plates of arbitrary plan form,” Computers and Structures, vol. 9, pp. 163–168, 1978. View at Google Scholar
  5. A. Frangi and M. Guiggiani, “Boundary element analysis of Kirchhoff plates with direct evaluation of hypersingular integrals,” International Journal for Numerical Methods in Engineering, vol. 46, pp. 1845–1863, 1999. View at Google Scholar
  6. A. Frangi and M. Guiggiani, “A direct approach for boundary integral equations with high-order singularities,” International Journal for Numerical Methods in Engineering, vol. 49, pp. 871–898, 2000. View at Google Scholar
  7. F. Hartmann and R. Zormantel, “The direct boundary element method in plate bending,” International Journal for Numerical Methods in Engineering, vol. 23, pp. 2049–2069, 1986. View at Google Scholar
  8. B. Knopke, “The hypersingular integral equation for the bending moments mxx, mxy, and myy of the Kirchhoff plate,” Computational Mechanics, vol. 15, pp. 19–30, 1994. View at Google Scholar
  9. M. Stern, “A general boundary integral formulation for plate bending problems,” International Journal for Solids and Structures, vol. 15, pp. 769–782, 1979. View at Google Scholar
  10. P. H. Wen, M. H. Aliabadi, and A. Young, “Application of dual reciprocity method to plates and shells, engineering analysis with boundary element,,” International Journal for Numerical Methods in Engineering, vol. 24, pp. 583–590, 2000. View at Google Scholar
  11. V. V. Zozulya and A. N. Lukin, “Calculation of plates by the method of boundary integral equations under the dynamic loading,” Doclady Akademii Nauk of Ukraine, vol. 8, pp. 64–70, 1997. View at Google Scholar
  12. V. V. Zozulya and A. N. Lukin, “Calculation of plates by the boundary integral equations method,” Doclady Akademii Nauk of Ukraine, vol. 4, pp. 39–45, 1996. View at Google Scholar
  13. J. Hadamard, Lectures on Cauchy's Problem in Linear Partial Differential Equations, Yale University Press, New Haven, Conn, USA, 1923.
  14. I. K. Lifanov et al., Hypersingular Integral Equations and Their Applications, Chapman&Hall, 2004.
  15. V. V. Zozulya, “Regularization of the divergent integrals. I. General consideration,” Electronic Journal of Boundary Elements, vol. 4, no. 2, pp. 49–57, 2006. View at Google Scholar
  16. V. V. Zozulya, “The Regularization of the Divergent Integrals in 2-D Elastostatics,” Electronic Journal of Boundary Elements, vol. 7, no. 2, pp. 50–88, 2009. View at Google Scholar
  17. V. V. Zozulya and A. N. Lukin, “Calculation of plates by the boundary element method,” Doclady Akademii Nauk of Ukraine, vol. 4, pp. 60–67, 1996. View at Google Scholar
  18. M. A. Krasnosel'skii et al., Integral Operators in Spaces of Summable Functions, Noordhoff, 1976.
  19. A. N. Tikhonov and V. Y. Arsenin, Solutions of Ill-Posed Problems, Winston, 1977.
  20. P. Kythe and M. Schaferkotter, Handbook of Computational Methods for Integration, CRC, 2005.
  21. V. Krylov, Approximate Calculation of Integrals, Dover, 2006.
  22. V. V. Zozulya and A. N. Lukin, “Design of plates by the boundary element method,” International Applied Mechanics, vol. 33, pp. 241–244, 1997. View at Google Scholar
  23. S. Timoshenko and S. Woinowski-Krieger, Theory of Plates and Shells, McGraw-Hill, New York, 1959.