Research Article

Skewness and Kurtosis: Important Parameters in the Characterization of Dental Implant Surface Roughness—A Computer Simulation

Figure 1

Two rough surfaces in cross-section. The 𝑅 𝑎 , 𝑅 𝑞 , 𝑅 𝑆 𝑚 , and 𝑅 d r parameters are the same for the two surfaces. The interface shear strength is much higher for surface (a) than for surface (b).
305312.fig.001a
(a)
305312.fig.001b
(b)