Table of Contents
ISRN Mechanical Engineering
Volume 2011 (2011), Article ID 309691, 11 pages
http://dx.doi.org/10.5402/2011/309691
Research Article

Modeling and Control of Cutter Vibration in the Presence of Random Distribution of Microhardness of Workpiece and Nonlinear Cutting Forces in Lathe Process

Mechanical Engineering Department, American University of Sharjah, Sharjah, P.O. Box 26666, Sharjah, UAE

Received 2 June 2011; Accepted 18 July 2011

Academic Editors: K. Yasuda and D. Zhou

Copyright © 2011 A. H. El-Sinawi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

A. H. El-Sinawi, “Modeling and Control of Cutter Vibration in the Presence of Random Distribution of Microhardness of Workpiece and Nonlinear Cutting Forces in Lathe Process,” ISRN Mechanical Engineering, vol. 2011, Article ID 309691, 11 pages, 2011. doi:10.5402/2011/309691