Table of Contents
ISRN Mechanical Engineering
Volume 2011 (2011), Article ID 309691, 11 pages
http://dx.doi.org/10.5402/2011/309691
Research Article

Modeling and Control of Cutter Vibration in the Presence of Random Distribution of Microhardness of Workpiece and Nonlinear Cutting Forces in Lathe Process

Mechanical Engineering Department, American University of Sharjah, Sharjah, P.O. Box 26666, Sharjah, UAE

Received 2 June 2011; Accepted 18 July 2011

Academic Editors: K. Yasuda and D. Zhou

Copyright © 2011 A. H. El-Sinawi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Shiraishi and H. Sumiya, “Improvement of geometrical errors by surface roughness and tool position controls,” in Proceedings of the Annual Meeting of the American Society of Mechanical Engineers, PED-vol. 45, pp. 9–22, 1990. View at Scopus
  2. M. Sander, A Practical Guide to the Assessment of Surface Texture, Mahr Perthen, Gottingen, Germany, 1991.
  3. Y. Altintas, M. Eynian, and H. Onozuka, “Identification of dynamic cutting force coefficients and chatter stability with process damping,” CIRP Annals—Manufacturing Technology, vol. 57, no. 1, pp. 371–374, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. B. W. Ikua, H. Tanaka, F. Obata, and S. Sakamoto, “Prediction of cutting forces and machining error in ball end milling of curved surfaces -I theoretical analysis,” Precision Engineering, vol. 25, no. 4, pp. 266–273, 2001. View at Publisher · View at Google Scholar · View at Scopus
  5. S. M. Pandit and M. S. Shunmugan, “Signature of machine tool errors on surface texture,” Annals of the CIRP, PED-vol. 45, pp. 63–74, 1990. View at Google Scholar
  6. W. S. Lin, B. Y. Lee, and C. L. Wu, “Modeling the surface roughness and cutting force for turning,” Journal of Materials Processing Technology, vol. 108, no. 3, pp. 286–293, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. O. B. Abouelatta and J. Mádl, “Surface roughness prediction based on cutting parameters and tool vibrations in turning operations,” Journal of Materials Processing Technology, vol. 118, pp. 269–277, 2001. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Fu, B. Muralikrishnan, and J. Raja, “Engineering surface analysis with different wavelet bases,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 125, no. 4, pp. 844–852, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. K. A. Risbood, U. S. Dixit, and A. D. Sahasrabudhe, “Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process,” Journal of Materials Processing Technology, vol. 132, pp. 203–214, 2003. View at Publisher · View at Google Scholar · View at Scopus
  10. G. B. Boothroyd and W. A. Knight, Fundamentals of Machining and Machine Tools, Marcel Dekker, New York, NY, USA, 1989.
  11. K. F. Ehmann, S. G. Kapoor, R. E. DeVor, and I. Lazoglu, “Machining process modeling: a review,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 119, no. 4, pp. 655–663, 1997. View at Google Scholar · View at Scopus
  12. P. Albrecht, “Dynamics of the metal cutting process,” Journal of Engineering for Industry, vol. 87, pp. 429–441, 1965. View at Google Scholar
  13. N. H. Hanna and S. A. Tobias, “A theory of nonlinear regenerative chatter,” Journal of Engineering for Industry, vol. 96, pp. 247–253, 1974. View at Google Scholar
  14. M. A. El Baradie, “Statistical analysis of the dynamic cutting coefficients and machine tool stability,” Journal of Engineering for Industry, vol. 115, no. 2, pp. 205–214, 1993. View at Google Scholar · View at Scopus
  15. J. Peters and P. Vanherck, “Machine tool stability tests and the incremental stiffness,” Annals of the CIRP, vol. 17, pp. 225–232, 1969. View at Google Scholar
  16. S. M. Pandit, T. L. Subramanian, and S. M. Wu, “Modeling machine tool chatter by time series,” Journal of Engineering for Industry, vol. 97, no. 1, pp. 211–215, 1975. View at Google Scholar · View at Scopus
  17. M. U. Jen and E. B. Magrab, “The dynamic interaction of the cutting process, workpiece, and lathe's structure in facing,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 118, no. 3, pp. 348–357, 1996. View at Google Scholar · View at Scopus
  18. L. Kops, M. Gould, and M. Mizrach, “Improved analysis of the workpiece accuracy in turning based on the emerging diameter,” Journal of Engineering for Industry, vol. 115, no. 3, pp. 253–257, 1993. View at Google Scholar · View at Scopus
  19. A. M. Shawky and M. A. Elbestawi, “An enhanced dynamic model in turning including the effect of ploughing forces,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 119, no. 1, pp. 10–20, 1997. View at Google Scholar · View at Scopus
  20. L. K. Daneshmend and H. A. Pak, “Model reference adaptive control of feed force in turning,” Journal of Dynamic Systems, Measurement and Control, vol. 108, no. 3, pp. 215–222, 1986. View at Google Scholar · View at Scopus
  21. T. E. Bailey, D. M. Jenkins, A. D. Spence, and M. A. Elbestawi, “Integrated modeling for metal removal operations,” in Proceedings of the ASME Dynamic Systems and Control Division (DSCD '96), vol. 58, pp. 191–198, 1996. View at Scopus
  22. Y. Tian, B. Shirinzadeh, and D. Zhang, “A flexure-based mechanism and control methodology for ultra-precision turning operation,” Precision Engineering, vol. 33, no. 2, pp. 160–166, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. A. H. El-Sinawi, “Two-dimensional vibration suppression in turning using optimal control of the cutting tool,” International Journal of Machining and Machinability of Materials, vol. 3, no. 1-2, pp. 91–103, 2008. View at Publisher · View at Google Scholar · View at Scopus
  24. H. Moradi, M. R. Movahhedy, and G. R. Vossoughi, “Robust control strategy for suppression of regenerative chatter in turning,” Journal of Manufacturing Processes, vol. 11, no. 2, pp. 55–65, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. S. N. Huang, K. K. Tan, Y. S. Wong, C. W. de Silva, H. L. Goh, and W. W. Tan, “Tool wear detection and fault diagnosis based on cutting force monitoring,” International Journal of Machine Tools and Manufacture, vol. 47, no. 3-4, pp. 444–451, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. Y. Zhu, “Estimation of an N-L-N Hammerstein-Wiener model,” Automatica, vol. 38, no. 9, pp. 1607–1614, 2002. View at Publisher · View at Google Scholar · View at Scopus
  27. A. H. El-Sinawi and A. R. Kashani, “Improving surface roughness in turning using a Kalman estimator-based feed forward control of tool's position,” Journal of Materials Processing Technology, vol. 167, pp. 54–61, 2005. View at Google Scholar
  28. G. M. Zhang and S. G. Kapoor, “Dynamic generation of machined surface, part 1: description of random excitation system,” Journal of Engineering for Industry, vol. 113, no. 2, pp. 137–144, 1991. View at Google Scholar · View at Scopus
  29. C. L. Tucker, “Sample variance measurement of mixing,” Chemical Engineering Science, vol. 36, no. 11, pp. 1829–1839, 1981. View at Google Scholar · View at Scopus
  30. M. Farina and L. Piroddi, “An iterative algorithm for simulation error based identification of polynomial input-output models using multi-step prediction,” International Journal of Control, vol. 83, no. 7, pp. 1442–1456, 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. L. Ljung, System Identification: Theory for the User, Prentice Hall, New York, NY, USA, 2nd edition, 1999.
  32. W. Gawronsky, Advanced Structural Dynamics and Active Control of Structures, Springer, New York, NY, USA, 2004.