Table of Contents
ISRN Mechanical Engineering
Volume 2011 (2011), Article ID 657819, 6 pages
http://dx.doi.org/10.5402/2011/657819
Research Article

The Investigation of Crack's Parameters on the V-Notch Using Photoelasticity Method

1Fatigue and Fracture Research Laboratory, School of Mechanical Engineering, Iran University of Science & Technology, 16846-13114 Tehran, Iran
2Wroclaw University of Technology, 50-370 Wroclaw, Poland

Received 13 January 2011; Accepted 8 March 2011

Academic Editor: X. Yang

Copyright © 2011 M. Saravani and M. Azizi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. H. Sherry, C. C. France, and M. R. Goldthorpe, “Compendium of T-stress solutions for two and three dimensional cracked geometries,” Fatigue and Fracture of Engineering Materials and Structures, vol. 18, no. 1, pp. 141–155, 1995. View at Google Scholar · View at Scopus
  2. R. Jones, D. Peng, S. Pitt, and C. Wallbrink, “Weight functions, CTOD, and related solutions for cracks at notches,” Engineering Failure Analysis, vol. 11, no. 1, pp. 79–114, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. M. L. Williams, “Stress singularities resulting from various boundary conditions insingular corners of plates inextension,” Journal of Applied Mechanics, vol. 19, no. 3, pp. 526–528, 1952. View at Google Scholar
  4. M. Mahinfalah and L. Zackery, “Photoelastic determination of mixed mode stress intensity factors for sharp reentrant corners,” Engineering Fracture Mechanics, vol. 52, no. 4, pp. 639–645, 1995. View at Google Scholar · View at Scopus
  5. T. Kondo, M. Kobayashi, and H. Sekine, “Strain gage method for determining stress intensities of sharp-notched strips,” Experimental Mechanics, vol. 41, no. 1, pp. 1–7, 2001. View at Google Scholar · View at Scopus
  6. D. Leguillon and Z. Yosibash, “Crack onset at a v-notch. Influence of the notch tip radius,” International Journal of Fracture, vol. 122, no. 1-2, pp. 1–21, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. X. F. Yao, H. Y. Yeh, and W. Xu, “Fracture investigation at V-notch tip using coherent gradient sensing (CGS),” International Journal of Solids and Structures, vol. 43, no. 5, pp. 1189–1200, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. X. Wang, T. Lewis, and R. Bell, “Estimations of the T-stress for small cracks at notches,” Engineering Fracture Mechanics, vol. 73, no. 3, pp. 366–375, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. D. G. Smith, “Photoelastic determination of mixed mode stress intensity factors,” Engineering Fracture Mechanics, vol. 4, no. 2, pp. 357–366, 1972. View at Google Scholar · View at Scopus
  10. E. E. Gdoutos and P. S. Theocaris, “A photoelastic determination of mixed-mode stress-intensity factors,” Experimental Mechanics, vol. 18, no. 3, pp. 87–96, 1978. View at Publisher · View at Google Scholar · View at Scopus
  11. J. M. Etheridge and J. W. Dally, “A three parameter method of determining SIF from isochromatic fringe loops,” Journal of Strain Analysis for Engineering Design, vol. 13, no. 2, pp. 91–94, 1978. View at Google Scholar · View at Scopus
  12. J. W. Dally and R. J. Sanford, “A general method for determining mixed-mode stress intensity factors from isochromatic fringe patterns,” Engineering Fracture Mechanics, vol. 11, no. 4, pp. 621–633, 1979. View at Google Scholar · View at Scopus
  13. K. Ramesh, S. Gupta, and A. A. Kelkar, “Evaluation of stress field parameters in fracture mechanics by photoelasticity,” Engineering Fracture Mechanics, vol. 56, no. 1, pp. 25–45, 1997. View at Google Scholar · View at Scopus
  14. R. K. L. Su and W. J. Feng, “Accurate determination of mode I and II leading coefficients of the Williams expansion by finite element analysis,” Finite Elements in Analysis and Design, vol. 41, no. 11-12, pp. 1175–1186, 2005. View at Publisher · View at Google Scholar · View at Scopus
  15. J. W. Dally and R. J. Sanford, “Experimental determination of KI for short internal cracks,” ASME Journal of Applied Mechanics, Transactions, vol. 68, no. 6, pp. 937–943, 2001. View at Publisher · View at Google Scholar · View at Scopus
  16. J. W. Dally and W. F. Riley, Experimental Stress Analysis, MC Graw-Hill, 3rd edition, 1991.
  17. K. Ramesh, Digital Photoelasticity, Springer, 2nd edition, 2000.
  18. M. R. Ayatollahi and H. Safari, “Evaluation of crack tip constraint using photoelasticity,” International Journal of Pressure Vessels and Piping, vol. 80, no. 9, pp. 665–670, 2003. View at Publisher · View at Google Scholar · View at Scopus
  19. M. R. Ayatollahi, M. J. Pavier, and D. J. Smith, “Determination of T -stress from finite element analysis for mode I and mixed mode I/II loading,” International Journal of Fracture, vol. 91, no. 3, pp. 283–298, 1998. View at Google Scholar · View at Scopus
  20. T. L. Anderson, Fracture Mechanics Fundamental and Applications, CRC Press, 2nd edition, 1995.