Table of Contents
ISRN Materials Science
Volume 2011 (2011), Article ID 681535, 8 pages
http://dx.doi.org/10.5402/2011/681535
Research Article

Corrosion Study of Steel API 5A, 5L and AISI 1080, 1020 in Drill-Mud Environment of Iranian Hydrocarbon Fields

1Petroleum University of Technology, Abadan, Iran
2National Iranian Drilling Company, Ahwaz, Iran

Received 20 April 2011; Accepted 7 June 2011

Academic Editor: T. Laurila

Copyright © 2011 M. Farzam et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Farzam, “Research into causes of National Iranian Drilling Company’s equipments and their preventions,” Reports 1, 2 and 3, 2005 to 2007.
  2. A. Husain and A. Hasan, “A mysterious downhole corrosion failure in an oil well,” in Proceedings of the 2nd Arabian Corrosion Conference on Industrial Corrosion and Corrosion Control Technology, p. 215, Kuwait Institute for Scientific Research, 1996.
  3. NACE, Corrosion of Oil Well Equipments, National Association of Corrosion Engineers, 1976.
  4. NACE, (National Association of Corrosion Engineers) PRO 502-2002.
  5. ASTM Designation G5-94, “Standard reference test method for making potentiostatic and potentiodynamic anodic polarization measurement,” in Annual Book of ASTM Standards, ASTM International, Conshohocken, Pa, USA, 1999. View at Google Scholar
  6. D. A. Jones, Principles and Prevention of Corrosion, chapters 3 and 4, Macmillan Publishing Company, New York, NY, USA, 1992.
  7. M. N. J. Al-Awad, A. S. Dahab, and M. E. El-Dahshan, “Testing of drilling fluid formulated from tabuk formation clays,” in Proceedings of the 2nd Arabian Corrosion Conference on Industrial Corrosion and Corrosion Control Technology, pp. 111–125, Kuwait Institute for Scientific Research, October, 1996.
  8. European Patent EP 1076113.
  9. F. Luo, C. Qin, and X. Wang, “Failure analysis of IEU drill pipe wash-out,” International Journal of Fatigue, vol. 27, no. 10–12, pp. 1360–1365, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. K. A. Macdonald, “Failure analysis of drill-string and bottom hole assembly components,” Engineering Failure Analysis, vol. 1, no. 2, p. 91, 1994. View at Google Scholar
  11. N. Acuña-González, E. García-Ochoa, and J. González-Sánchez, “Assessment of the dynamics of corrosion fatigue crack initiation applying recurrence plots to the analysis of electrochemical noise data,” International Journal of Fatigue, vol. 30, no. 7, pp. 1211–1219, 2008. View at Publisher · View at Google Scholar
  12. M. Farzam, Corrosion and Corrosion Protection, Yadvareh Publishing Company, Tehran, Iran, 1999.
  13. Y. A. Khulief, F. A. Al-Sulaiman, and S. Bashmal , “Vibration analysis of drill-string with self exited stick-slip oscillation,” Journal of Sound and Vibration, vol. 299, no. 3, pp. 540–558, 2007. View at Google Scholar
  14. S. Masaki, “Drill pipe failure prevention, corrosion protection with drill pipe surface coating and management of drill pipe using fatigue data base,” Journal of Japans Association for Petroleum Technology, vol. 7, no. 5, p. 445, 2006. View at Google Scholar
  15. D. J. Whitefield and A. van Bennekom, “Abrasive wear properties of experimental metastable duplex stainless steels,” Wear, vol. 196, no. 1-2, pp. 92–99, 1996. View at Google Scholar · View at Scopus
  16. X. C. Lu, K. Shi, S. Z. Li, and X. X. Jiang, “Effects of surface deformation on corrosive wear of stainless steel in sulfuric acid solution,” Wear, vol. 225–229, no. 1, pp. 537–543, 1999. View at Google Scholar · View at Scopus
  17. H. Y. Bi, X. X. Jiang, and S. Z. Li, “The corrosive wear behavior of Cr-Mn-N series casting stainless steel,” Wear, vol. 225–229, no. 2, pp. 1043–1049, 1999. View at Google Scholar · View at Scopus