Table of Contents
ISRN Materials Science
Volume 2011, Article ID 718761, 10 pages
http://dx.doi.org/10.5402/2011/718761
Review Article

Thermal Conductivity of High-Strength Polyethylene Fiber and Applications for Cryogenic Use

1Research Center, Toyobo Co., Ltd., 2-1-1, Katata, Ohtsu, Shiga 520-0292, Japan
2Faculty of Science and Technology, Sophia University, 7-1, Kioi-Cho, Chiyoda-Ku, Tokyo 102-8554, Japan

Received 6 July 2011; Accepted 25 July 2011

Academic Editors: C. Carbonaro and F. Herlach

Copyright © 2011 Atsuhiko Yamanaka and Tomoaki Takao. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Yoneda and S. Kawabata, “Analysis of transient heat conduction and its application. I. The fundamental analysis and application to thermal conductivity and thermal diffusivity measurements,” Journal of the Textile Machinery Society of Japan, vol. 34, no. 9, pp. T183–T193, 1981. View at Google Scholar · View at Scopus
  2. M. Yoneda, “Warm/cool feeling in clothing materials,” Journal of the Textile Machinery Society of Japan, vol. 35, no. 8, pp. P365–P370, 1982. View at Google Scholar
  3. S. Kawabata, “Developement of a device for measureing heat-moisture transfer properties of apparel fabrics,” Journal of the Textile Machinery Society of Japan, vol. 37, p. 130, 1984. View at Google Scholar
  4. S. Nishijima, T. Okada, and K. Niihara, “Design of ceramics with warm feeling,” Key Engineering Materials, vol. 161–163, pp. 535–538, 1999. View at Google Scholar · View at Scopus
  5. Cryogenic Association of Japan, Hand Book of Superconductivity and Cryogenic Engineering, Oumusha, Japan, 1993.
  6. T. Takao, A. Kawasaki, M. Yamaguchi et al., “Investigation of cooling effects on conduction cooled HTS tape due to high thermal conduction plastics,” IEEE Transactions on Applied Superconductivity, vol. 13, no. 2, pp. 1776–1779, 2003. View at Publisher · View at Google Scholar · View at Scopus
  7. C.-M. Ye, B.-Q. Shentu, and Z.-X. Weng, “Thermal conductivity of high density polyethylene filled with graphaite,” Journal of Applied Polymer Science, vol. 101, pp. 3806–3810, 2006. View at Google Scholar
  8. T. Takao, T. Yuhara, R. Sakuma, T. Goto, and A. Yamanaka, “Evaluating cooling performance of high-thermal-conduction composite in conduction-cooled superconducting coils,” IEEE Transactions on Applied Superconductivity, vol. 20, no. 3, pp. 2126–2129, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. T. Bhowmick and S. Pattanayak, “Thermal conductivity, heat capacity and diffusivity of rubbers from 60 to 300 K,” Cryogenics, vol. 30, no. 2, pp. 116–121, 1990. View at Google Scholar · View at Scopus
  10. M. Jäckel, M. Müller, A. L. Claverie, and K. F. Arndt, “Thermal conductivity of modified epoxy resins with different cross-link densities at low temperatures,” Cryogenics, vol. 31, no. 4, pp. 228–230, 1991. View at Google Scholar · View at Scopus
  11. C. L. Choy, W. H. Luk, and F. C. Chen, “Thermal conductivity of highly oriented polyethylene,” Polymer, vol. 19, no. 2, pp. 155–162, 1978. View at Google Scholar · View at Scopus
  12. C. L. Choy, S. P. Wong, and K. Young, “Model calculation of the thermal conductivity of polymer crystals,” Journal of Polymer Science: Polymer Physics Edition, vol. 23, no. 8, pp. 1495–1504, 1985. View at Google Scholar · View at Scopus
  13. D. B. Mergenthaler, M. Pietralla, S. Roy, and H. G. Killan, “Thermal conductivity in ultraoriented polyethylene,” Macromolecules, vol. 25, no. 13, pp. 3500–3502, 1992. View at Google Scholar · View at Scopus
  14. S. Burgess and D. Greig, “The low-temperature thermal conductivity of polyethylene,” Journal of Physics C, vol. 8, no. 11, pp. 1637–1648, 1975. View at Publisher · View at Google Scholar · View at Scopus
  15. A. G. Gibson, D. Greig, M. Sahota, I. M. Ward, and C. L. Choy, “Thermal conductivity of ultrahigh-modulus polyethylene,” Journal of Polymer Science: Polymer Letters Edition, vol. 15, no. 4, pp. 183–192, 1977. View at Google Scholar · View at Scopus
  16. C. L. Choy, “Thermal conductivity of polymers,” Polymer, vol. 18, no. 10, pp. 984–1004, 1977. View at Google Scholar · View at Scopus
  17. C. L. Choy and W. P. Leung, “Thermal conductivity of ultradrawn polyethylene,” Journal of Polymer Science: Polymer Physics Edition, vol. 21, no. 7, pp. 1243–1246, 1983. View at Publisher · View at Google Scholar
  18. H. Fujishiro, M. Ikebe, T. Kashima, and A. Yamanaka, “Thermal conductivity and diffusivity of high-strength polymer fibers,” Japanese Journal of Applied Physics, Part 1, vol. 36, no. 9, pp. 5633–5637, 1997. View at Google Scholar · View at Scopus
  19. H. Fujishiro, M. Ikebe, T. Kashima, and A. Yamanaka, “Drawing effect on thermal properties of high-strength polyethylene fibers,” Japanese Journal of Applied Physics, Part 1, vol. 37, no. 4, pp. 1994–1995, 1998. View at Google Scholar · View at Scopus
  20. A. Yamanaka, H. Fujishiro, T. Kashima et al., “Thermal conductivity of high strength polyethylene fiber in low temperature,” Journal of Polymer Science, Part B, vol. 43, no. 12, pp. 1495–1503, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. C. L. Choy, F. C. Chen, and W. H. Luk, “Thermal conductivity of oriented crystalline polymers,” Journal of Polymer Science, vol. 18, no. 6, pp. 1187–1207, 1980. View at Google Scholar · View at Scopus
  22. C. L. Choy and K. Young, “Thermal conductivity of semicrystalline polymers—a model,” Polymer, vol. 18, no. 8, pp. 769–776, 1977. View at Google Scholar · View at Scopus
  23. J. Hennig, “Anisotropy and structure in uniaxially stretched amorphous high polymers,” Journal of Polymer Science, Part C, vol. 16, p. 2751, 1967. View at Google Scholar
  24. F. H. Müller, “Uniaxial stretching and anisotropy,” Journal of Polymer Science, Part C, vol. 20, no. 1, pp. 61–76, 1967. View at Publisher · View at Google Scholar
  25. J. Morikawa, J. Tan, and T. Hashimoto, “Study of change in thermal diffusivity of amorphous polymers during glass transition,” Polymer, vol. 36, no. 23, pp. 4439–4443, 1995. View at Google Scholar · View at Scopus
  26. A. Yamanaka, S. Abe, M. Tsutsumi et al., “Thermal conductivity of ramie fiber drawn in water in low temperature,” Journal of Applied Polymer Science, vol. 100, no. 3, pp. 2196–2202, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. A. Yamanaka, Y. Izumi, T. Terada et al., “Radiation effect on the thermal conductivity and diffusivity of ramie fibers in a range of low temperatures by γ rays,” Journal of Applied Polymer Science, vol. 100, no. 6, pp. 5007–5018, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. A. Yamanaka, M. Yoshikawa, S. Abe et al., “Effects of vapor-phase-formaldehyde treatments on thermal conductivity and diffusivity of ramie fibers in the range of low temperature,” Journal of Polymer Science, Part B, vol. 43, no. 19, pp. 2754–2766, 2005. View at Publisher · View at Google Scholar · View at Scopus
  29. http://www.toyobo.co.jp/seihin/dn/dyneema/seihin/koutei.html.
  30. A. Yamanaka, Y. Izumi, T. Kitagawa et al., “The effect of γ-irradiation on thermal strain of high strength polyethylene fiber at low temperature,” Journal of Applied Polymer Science, vol. 102, no. 1, pp. 204–209, 2006. View at Publisher · View at Google Scholar · View at Scopus
  31. S. Abe, M. Tsutsumi, M. Yoshikawa, and Y. Sakaguti, “Effects of water-pretreatment on tensile strength of crosslinked cotton fibers,” Journal of the Textile Machinery Society of Japan, vol. 53, no. 1, pp. 55–61, 2000. View at Google Scholar · View at Scopus
  32. G. O. Phillips and J. C. Arthur Jr., “Photochemistry and radiation chemistry of cellulose,” in Cellulose Chemistry and Its Applications, T. P. Nevell and S. H. Zeronian, Eds., chapter 12, p. 290, John Wiley & Sons, New York, NY, USA, 1985. View at Google Scholar
  33. T. Takao, T. Kashima, and A. Yamanaka, “Mechanical properties: structural composites—influence of sliding directions on frictional properties of GFRPs and DFRPs,” Advances in Cryogenic Engineering, vol. 46, pp. 119–126, 2000. View at Google Scholar
  34. T. Nitta, M. Chiba, T. Kashima, and T. Takao, “AC surface spark voltage of pipes composed with high strength polyethylene fiber reinforced plastics in coolant,” Proceedings of MT-15, vol. 1159, 1998. View at Google Scholar
  35. T. Okada, S. Nishijima, K. Takahata, and J. Yamamoto, “Research and development of insulating materials for large helical device,” Cryogenics, vol. 31, no. 4, pp. 307–311, 1991. View at Google Scholar · View at Scopus
  36. T. Kashima, A. Yamanaka, S. Nishijima, and T. Okada, “Thermal strain of pipes composed with high-strength polyethylene fiber reinforced plastics at cryogenic temperatures,” Advances in Cryogenic Engineering, vol. 42, pp. 147–154, 1996. View at Google Scholar
  37. S. Abe, M. Yoshikawa, Y. Sakaguchi, and M. Shinjo, “Relation between tensile strength and wash & wear properties of cotton fabrics treated with dihydroxyethyleneurea and vapor-phase-formaldehyde,” Journal of the Textile Machinery Society of Japan, vol. 52, no. 2, pp. T29–T36, 1999. View at Google Scholar
  38. T. Takao, A. Watanabe, T. Takiyama, K. Nakamura, and A. Yamanaka, “Heat drain effects from HTS tapes to high thermal conduction plastics for conduction-cooled magnets,” IEEE Transactions on Applied Superconductivity, vol. 17, no. 2, pp. 2398–2401, 2007. View at Publisher · View at Google Scholar · View at Scopus
  39. S. Abe, S. Ohta, and M. Yoshikawa, “Effects of pre-treatments and catalysts-application methods on formaldehyde cross-linking density in cotton fibers finished with vapor-phase-formaldehyde,” Journal of the Textile Machinery Society of Japan, vol. 50, no. 5, pp. T124–T130, 1997. View at Google Scholar
  40. S. Abe, S. Ohta, M. Yoshikawa, and M. Tsutsumi, “Effects of pre-treatment on the mechanical and wash & wear properties of cotton fabrics finished with vapor-phase-formaldehyde,” Journal of the Textile Machinery Society of Japan, vol. 50, no. 6, pp. T139–T145, 1997. View at Google Scholar
  41. S. Abe, M. Yoshikawa, Y. Shimizu, and Y. Sakaguchi, “Cotton fibers crosslinked by vapor-phase-formaldehyde and dimethyloldihydroxyethyleneurea after pretreatment with liquid ammonia and subsequently: stability to hot water-treatment,” Journal of the Textile Machinery Society of Japan, vol. 52, no. 12, pp. T274–T281, 1999. View at Google Scholar
  42. S. M. Stark Jr. and S. P. Rowrand, “Swelling characteristics of gel fractions of formaldehyde-modified cotton celluloses,” Journal of Applied Polymer Science, vol. 10, no. 11, pp. 1777–1786, 1966. View at Google Scholar
  43. S. P. Rowland and A. W. Post, “A measure of effective crosslinks in formaldehyde-modified cotton celluloses,” Journal of Applied Polymer Science, vol. 10, no. 11, pp. 1751–1761, 1966. View at Google Scholar
  44. G. L. Payet, “ALMI-set process. A new approach to carefree garments,” Textile Research Journal, vol. 43, no. 4, pp. 194–197, 1973. View at Google Scholar · View at Scopus
  45. S. Abe, S. Ohta, M. Yoshikawa, and M. Tsutsumi, “Effects of pretreatment on the mechanical and wash-and-wear properties of cotton fabrics cross-linked with vapor-phase-formaldehyde and dimethyloldihydroxyethyleneurea,” Journal of the Textile Machinery Society of Japan, vol. 52, no. 5, pp. T65–T71, 1999. View at Google Scholar
  46. J. Lemstra, R. Kirschbaum, T. Ohta, and H. Yasuda, “High-strength/high-modulus structures based on flexible macromolecules: gel-spinning and related processes,” in Developments in Oriented Polymers-2, I. M. Ward, Ed., p. 39, Elsevier, New York, NY, USA, 1987. View at Google Scholar
  47. P. Smith and P. J. Lemstra, “Ultra-high-strength polyethylene filaments by solution spinning/drawing,” Journal of Materials Science, vol. 15, no. 2, pp. 505–514, 1980. View at Publisher · View at Google Scholar · View at Scopus
  48. Y. Ohta and H. Yasuda, “Progress in gel-spining method—new paradigm for high-performance fibers,” Kobunnshi, vol. 44, no. 10, p. 658, 1995. View at Google Scholar
  49. Y. Ohta, “Ultra-high strength polyethylene fiber: properties and applications,” Sen'I Gakkaishi, vol. 54, no. 1, pp. P8–P11, 1998. View at Google Scholar
  50. Y. Ohta, “Development of ultra-high-strength, polyetylene fiber ‘Dyneema’,” Sen'I Gakkaishi, vol. 55, no. 12, pp. P413–P417, 1999. View at Google Scholar
  51. Y. Ohta, “Structural development of ultra-high strength polyethylene fiber during gel-spinning process,” Sen'I Gakkaishi, vol. 60, no. 9, p. 451, 2004. View at Google Scholar
  52. Y. Izumi, M. Nishii, T. Seguchi, K. Ema, and T. Yamamoto, “Effect of molecular orientation on the radiolysis of polyethylene in the presence of oxygen,” Radiation Physics and Chemistry, vol. 37, no. 2, pp. 213–216, 1991. View at Google Scholar · View at Scopus
  53. M. Takeo, S. Sato, M. Matsuo et al., “Dependence on winding tensions for stability of a superconducting coil,” Cryogenics, vol. 43, no. 10-11, pp. 649–658, 2003. View at Publisher · View at Google Scholar · View at Scopus
  54. A. Ishiyama and H. Asai, “A stability criterion for cryocooler-cooled HTS coils,” IEEE Transactions on Applied Superconductivity, vol. 11, no. 1, pp. 1832–1835, 2001. View at Publisher · View at Google Scholar · View at Scopus
  55. Y. Lvovsky, “Conduction crisis and quench dynamics in cryocooler-cooled HTS magnets,” IEEE Transactions on Applied Superconductivity, vol. 12, no. 1, pp. 1565–1569, 2002. View at Publisher · View at Google Scholar · View at Scopus
  56. “TOKUYAMA Co. Ltd.,” http://www.shapal.jp/index.html.
  57. N. Sekine, T. Takao, Y. Kojo et al., “Improvement in stability of superconducting coil by different mechanical properties of bobbins,” Physica C, vol. 392–396, no. 2, pp. 1205–1209, 2003. View at Publisher · View at Google Scholar · View at Scopus