Table of Contents
ISRN Mechanical Engineering
Volume 2011, Article ID 795764, 9 pages
http://dx.doi.org/10.5402/2011/795764
Research Article

Numerical Study on the Strength of Pipe Joints

Department of Mechanical Engineering, Tokyo University of Science, Kagurazaka 1-3, Shinjuku-ku, Tokyo 162-8601, Japan

Received 6 July 2011; Accepted 18 August 2011

Academic Editors: D. Aggelis, A. E. Huespe, and D. Zhou

Copyright © 2011 Dai-Heng Chen and Kenichi Masuda. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Architectural Institute of Japan, Recommendations for the Design and Fabrication of Tubular Truss Structures in Steel, chapter 4, 2002.
  2. N. Akiyama, M. Yajima, H. Akiyama, and F. Ohtake, β€œExperimental study on strength of joints in steel tubular structures,” Journal of Society of Steel Construction, vol. 10, no. 102, pp. 37–68, 1974 (Japanese). View at Google Scholar
  3. Y. Makino, Y. Kurobane, and Y. Mitsui, β€œUltimate strength of tubular joints for local failures due to compression braces,” Transactions of Architectural Institute of Japan, vol. 251, pp. 45–55, 1977. View at Google Scholar
  4. K. Washio, T. Togo, and Y. Mitsui, β€œExperimental research on local failure of chord in tubular truss joints,” Transactions of Architectural Institute of Japan, vol. 140, pp. 55–62, 1967. View at Google Scholar
  5. H. Kanatani, β€œExperimental study of welded tubular connection (Part 1),” Transactions of Architectural Institute of Japan, vol. 108, pp. 31–39, 1965 (Japanese). View at Google Scholar
  6. E. M. Dexter and M. M. K. Lee, β€œStatic strength of axially loaded tubular K-joints. I: behavior,” Journal of Structural Engineering, vol. 125, no. 2, pp. 194–201, 1999. View at Google Scholar Β· View at Scopus