Research Article
Optimization of Operation Sequencing in CAPP Using Superhybrid Genetic Algorithms-Simulated Annealing Technique
Table 3
CAD database for component in Figure
2 [
7].
| | Feature no. | Feature type | dx (mm) | dy (mm) | Width or radius (mm) | Length (mm) | Depth (mm) | Projected area (mm2) | Volume (mm3) |
| | F1 | Rectangular Pocket | 50 | 90 | 45 | 30 | 20 | 1350 | 27000 | | F2 | Thru Hole | 35 | 70 | 7.5 | — | 25 | 176.71 | 4418 | | F3 | Blind step | 110 | 110 | 20 | 30 | 25 | 600 | 15000 | | F4 | Thru hole | 110 | 120 | 6 | — | 35 | 113.1 | 3960 | | F5 | Thru hole | 30 | 120 | 6 | — | 35 | 113.1 | 3960 | | F6 | Edge cut | 110 | 0 | 40 | 40 | 30 | 1600 | 48000 | | F7 | Blind hole | 125 | 15 | 5 | — | 25 | 78.54 | 1960 | | F8 | Blind step | 30 | 110 | 20 | 30 | 25 | 600 | 15000 | | F9 | Thru slot | 0 | 60 | 20 | 140 | 25 | 2800 | 70000 | | F10 | Blind slot | 45 | 0 | 35 | 60 | 25 | 2100 | 52500 |
|
|
