Table of Contents
ISRN Mechanical Engineering
Volume 2011 (2011), Article ID 979532, 9 pages
Research Article

Orthotropic Models of Corrugated Sheets in Finite Element Analysis

Department of Aeronautical and Vehicle Engineering, The Royal Institute of Technology (KTH), Teknikringen 8, 100 44 Stockholm, Sweden

Received 28 January 2011; Accepted 21 March 2011

Academic Editors: F. Findik and A. Tounsi

Copyright © 2011 David Wennberg et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Samanta and M. Mukhopadhyay, “Finite element static and dynamic analyses of folded plates,” Engineering Structures, vol. 21, no. 3, pp. 277–287, 1999. View at Google Scholar
  2. D. Briassoulis, “Equivalent orthotropic properties of corrugated sheets,” Computers and Structures, vol. 23, no. 2, pp. 129–138, 1986. View at Google Scholar
  3. K. Liew, L. Peng, and S. Kitipornchai, “Buckling analysis of corrugated plates using a mesh-free Galerkin method based on the first-order shear deformation theory,” Computational Mechanics, vol. 38, no. 1, pp. 61–75, 2006. View at Publisher · View at Google Scholar
  4. HyperWorks 10, Online Help and Documentation,
  5. T. J. Easley, “Buckling formulas for corrugated metal shear diaphragms,” Journal of the Structural Division, vol. 101, pp. 1403–1417, 1975. View at Google Scholar
  6. T. J. Easley and E. D. McFarland, “Buckling of light gage corrugated metal shear diaphragms,” Journal of the Structural Division, vol. 95, no. 7, pp. 1497–1516, 1969. View at Google Scholar
  7. E. D. McFarland, An investigation of the static stability of corrugated rectangular loaded in pure shear, Ph.D. thesis, University of Kansas, Lawrence, Kan, USA, 1967.
  8. T. H. G. Megson, Aircraft Structures for Engineering Students, Butterworth-Heinemann, Boston, Mass, USA, 4th edition, 2007.