A Note on the Kelvin Effect in 100Cr6 Steel with Application to Identification of the Elastoplastic Limit

<table>Tensile specimen used in the experiments. The total length of the specimen is 150 mm, the gauge length is 70 mm and the gauge diameter is 7 mm. The bars were machined with 20 mm M10-threading at each end to allow fastening in the load-frame grips.</table>

International Scholarly Research Notices

fig1

Figure 1

Figure 1: A Note on the Kelvin Effect in 100Cr6 Steel with Application to Identification of the Elastoplastic Limit 