A Note on the Kelvin Effect in 100Cr6 Steel with Application to Identification of the Elastoplastic Limit

Table 2

Comparison of yield point strain and stress for the two material conditions at two different strain rates. The strain and stress at yielding, corresponding to the maximum temperature drop, is denoted by 𝜀_yield and 𝜎_yield, respectively. The yield stress at 0.2% inelastic strain is denoted by 𝜎_0.2.

Material	𝜀̇ [1/s]	𝜀yield	𝜎yield [MPa]	𝜎0.2 [MPa]
SA	0.0014	0.0046	383	386
SA	0.14	0.0039	430	431
QT	0.0014	0.0049	963	1021
QT	0.14	0.0049	1016	1066