Table of Contents
ISRN Renewable Energy
Volume 2012 (2012), Article ID 167629, 9 pages
http://dx.doi.org/10.5402/2012/167629
Research Article

The Influence of Process Conditions on the Chemical Composition of Pine Wood Catalytic Pyrolysis Oils

1Department of Biological Systems Engineering, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061, USA
2Department of Biological Engineering, Utah State University, Logan, UT 84341, USA

Received 25 October 2012; Accepted 19 November 2012

Academic Editors: C. Koroneos and W. E. Mabee

Copyright © 2012 J. Pereira et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. Czernik and A. V. Bridgwater, “Overview of applications of biomass fast pyrolysis oil,” Energy and Fuels, vol. 18, no. 2, pp. 590–598, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. A. V. Bridgwater, D. Meier, and D. Radlein, “An overview of fast pyrolysis of biomass,” Organic Geochemistry, vol. 30, no. 12, pp. 1479–1493, 1999. View at Publisher · View at Google Scholar · View at Scopus
  3. V. A. Huffman and A. V. Bridgwater, The Characterization of Fast Pyrolysis Bio-Oils, Advances in Thermochemical Biomass Conversion, vol. 2, Blackie, London, UK, 1st edition, 1994.
  4. R. Maggi and B. Delmon, Characterization of Bio-Oils Produced By Pyrolysis, Advances in Thermochemical Biomass Conversion, vol. 2, Blackie, London, UK, 1st edition, 1994.
  5. T. Milne, F. Agblevor, M. Davis, S. Deutch, and D. Johnson, A Review of the Chemical Composition of Fast-Pyrolysis Oils From Biomass, Blackie, London, UK, 1997.
  6. L. Ingram, D. Mohan, M. Bricka et al., “Pyrolysis of wood and bark in an auger reactor: physical properties and chemical analysis of the produced bio-oils,” Energy and Fuels, vol. 22, no. 1, pp. 614–625, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. J. H. Marsman, J. Wildschut, F. Mahfud, and H. J. Heeres, “Identification of components in fast pyrolysis oil and upgraded products by comprehensive two-dimensional gas chromatography and flame ionisation detection,” Journal of Chromatography A, vol. 1150, no. 1-2, pp. 21–27, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. B. Scholze and D. Meier, “Characterization of the water-insoluble fraction from pyrolysis oil (pyrolytic lignin). Part I. PY-GC/MS, FTIR, and functional groups,” Journal of Analytical and Applied Pyrolysis, vol. 60, no. 1, pp. 41–54, 2001. View at Publisher · View at Google Scholar · View at Scopus
  9. E. Mészáros, E. Jakab, and G. Várhegyi, “TG/MS, Py-GC/MS and THM-GC/MS study of the composition and thermal behavior of extractive components of Robinia pseudoacacia,” Journal of Analytical and Applied Pyrolysis, vol. 79, no. 1-2, pp. 61–70, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. L. Fagernas, Chemical and Physical Characterization of Biomass-Based Pyrolysis Oils. Literature Review, Technical Research Centre of Finland, Espoo, Finland, 1995.
  11. M. Garcia-Perez, A. Chaala, H. Pakdel, D. Kretschmer, and C. Roy, “Characterization of bio-oils in chemical families,” Biomass and Bioenergy, vol. 31, no. 4, pp. 222–242, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. K. Sipilä, E. Kuoppala, L. Fagernäs, and A. Oasmaa, “Characterization of biomass-based flash pyrolysis oils,” Biomass and Bioenergy, vol. 14, no. 2, pp. 103–113, 1998. View at Publisher · View at Google Scholar · View at Scopus
  13. K. L. Sobeih, M. Baron, and J. Gonzalez-Rodriguez, “Recent trends and developments in pyrolysis-gas chromatography,” Journal of Chromatography A, vol. 1186, no. 1-2, pp. 51–66, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. S. Yaman, “Pyrolysis of biomass to produce fuels and chemical feedstocks,” Energy Conversion and Management, vol. 45, no. 5, pp. 651–671, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. A. V. Bridgwater, “Catalysis in thermal biomass conversion,” Applied Catalysis A, vol. 116, no. 1-2, pp. 5–47, 1994. View at Google Scholar · View at Scopus
  16. J. Adam, M. Blazsó, E. Mészáros et al., “Pyrolysis of biomass in the presence of Al-MCM-41 type catalysts,” Fuel, vol. 84, no. 12-13, pp. 1494–1502, 2005. View at Publisher · View at Google Scholar · View at Scopus
  17. J. F. Li, R. Yan, B. Xiao, X. L. Wang, and H. Yang, “Influence of temperature on the formation of oil from pyrolyzing palm oil wastes in a fixed bed reactor,” Energy and Fuels, vol. 21, no. 4, pp. 2398–2407, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Garcia-Perez, S. Wang, J. Shen, M. Rhodes, W. J. Lee, and C. Z. Li, “Effects of temperature on the formation of lignin-derived oligomers during the fast pyrolysis of Mallee woody biomass,” Energy and Fuels, vol. 22, no. 3, pp. 2022–2032, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. D. Mohan, C. U. Pittman, and P. H. Steele, “Pyrolysis of wood/biomass for bio-oil: a critical review,” Energy and Fuels, vol. 20, no. 3, pp. 848–889, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. F. A. Agblevor, A. Murden, and B. R. Hames, “Improved method of analysis of biomass sugars using high-performance liquid chromatography,” Biotechnology Letters, vol. 26, no. 15, pp. 1207–1210, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. F. A. Agblevor, S. Beis, N. O. Mante, and N. Abdoulmoumine, “Fractional catalytic pyrolysis of hybrid poplar wood,” Industrial and Engineering Chemistry Research, vol. 49, no. 8, pp. 3533–3538, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. C. N. Satterfield, Heterogeneous Catalysis in Industrial Practice, McGraw-Hill, New York, NY, USA, 1981.
  23. J. Álvarez, S. Ordóñez, R. Rosal, H. Sastre, and F. V. Díez, “A new method for enhancing the performance of red mud as a hydrogenation catalyst,” Applied Catalysis A, vol. 180, no. 1-2, pp. 399–409, 1999. View at Google Scholar · View at Scopus
  24. S. Julien, E. Chornet, P. K. Tiwari, and R. P. Overend, “Vacuum pyrolysis of cellulose: fourier transform infrared characterization of solid residues, product distribution and correlations,” Journal of Analytical and Applied Pyrolysis, vol. 19, pp. 81–104, 1991. View at Google Scholar · View at Scopus
  25. J. Piskorz, D. Radlein, D. S. Scott, and S. Czernik, “Pretreatment of wood and cellulose for production of sugars by fast pyrolysis,” Journal of Analytical and Applied Pyrolysis, vol. 16, no. 2, pp. 127–142, 1989. View at Google Scholar · View at Scopus
  26. S. Julien, E. Chornet, and R. P. Overend, “Influence of acid pretreatment (H2SO4, HCl, HNO3) on reaction selectivity in the vacuum pyrolysis of cellulose,” Journal of Analytical and Applied Pyrolysis, vol. 27, no. 1, pp. 25–43, 1993. View at Google Scholar · View at Scopus
  27. F. W. Atadana, Catalaytic pyrolysis of cellulose, hemicellulose and lignin model compounds [M.S. thesis], Virginia Polytechnic Institute and State University, 2010.
  28. D. Fengel and G. Wegener, Wood Chemistry, Ultrastructure, Reaction, Walter De Gruyter, New York, NY, USA, 1989.
  29. P. A. Horne and P. T. Williams, “The effect of zeolite ZSM-5 catalyst deactivation during the upgrading of biomass-derived pyrolysis vapours,” Journal of Analytical and Applied Pyrolysis, vol. 34, no. 1, pp. 65–85, 1995. View at Google Scholar · View at Scopus