Table of Contents
ISRN Metallurgy
Volume 2012 (2012), Article ID 195654, 8 pages
http://dx.doi.org/10.5402/2012/195654
Research Article

Densification Behaviour in the Fabrication of Al-Fe Metal Matrix Composite Using Powder Metallurgy Route

1Department of Materials Science and Metallurgical Engineering, University Institute of Engineering & Technology, CSJM University, Kanpur 208024, India
2Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, India

Received 19 September 2012; Accepted 8 October 2012

Academic Editors: Y. S. Chang and S. C. Wang

Copyright © 2012 Siddhartha Tiwari et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. K. Surappa, “Aluminium matrix composites challenges and opportunities,” Sadhana, vol. 28, p. 319, 2003. View at Google Scholar
  2. S. Mohan and S. Srivastava, “Surface behaviour of asCast Al-Fe intermetallic composites,” Tribology Letters, vol. 22, no. 1, pp. 45–51, 2006. View at Google Scholar
  3. A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus, and W. S. Miller, “Recent development in aluminium alloys for aerospace applications,” Materials Science and Engineering, vol. 280, no. 1, pp. 102–107, 2000. View at Google Scholar · View at Scopus
  4. J. M. Torralbaa, C. E. da Costab, and F. Velasco, “P/M aluminum matrix composites: an overview,” Journal of Materials Processing Technology, vol. 133, pp. 203–206, 2003. View at Google Scholar
  5. J. R. Pickens, “Aluminium powder metallurgy technology for high-strength applications,” Journal of Materials Science, vol. 16, no. 6, pp. 1437–1457, 1981. View at Publisher · View at Google Scholar
  6. Y. B. Liu, S. C. Lim, L. Lu, and M. O. Lai, “Recent development in the fabrication of metal matrix-particulate composites using powder metallurgy techniques,” Journal of Materials Science, vol. 29, no. 8, pp. 1999–2007, 1994. View at Google Scholar
  7. S.-J. L. Kang, Sintering: Densification, Grain growth and Microstructure, Jorden Hill, Oxford, UK, 1st edition, 2005.
  8. D. Bouvard, “Densification behaviour of mixtures of hard and soft powders under pressure,” Powder Technology, vol. 111, no. 3, pp. 231–239, 2000. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Braginsky, V. Tikare, and E. Olevsky, “Numerical simulation of solid state sintering,” International Journal of Solids and Structures, vol. 42, no. 2, pp. 621–636, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Svoboda and H. Riedel, “New solutions describing the formation of interparticle necks in solid-state sintering,” Acta Metallurgica et Materialia, vol. 43, no. 1, pp. 1–10, 1995. View at Google Scholar
  11. C. L. Martin and D. Bouvard, “Study of the cold compaction of composite powders by the discrete element method,” Acta Materialia, vol. 51, no. 2, pp. 373–386, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. T. Kraft and H. Riedel, “Numerical simulation of solid state sintering; model and application,” Journal of the European Ceramic Society, vol. 24, no. 2, pp. 345–361, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. G. S. Upadhyaya, “Future directions in sintering research,” Science of Sintering, vol. 43, no. 1, pp. 3–8, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. G. S. Upadhyaya, “Some issues in sintering science and technology,” Materials Chemistry and Physics, vol. 67, no. 1–3, pp. 1–5, 2001. View at Google Scholar
  15. Y.-S. Kwon and A. Savitskii, “Solid-state sintering of metal powder mixtures,” Journal of Materials Synthesis and Processing, vol. 9, pp. 299–317, 2001. View at Google Scholar
  16. H.-Z. Kang and C. -T. Hu, “Swelling behavior in reactive sintering of Fe-Al mixtures,” Materials Chemistry and Physics, vol. 88, no. 2-3, pp. 264–272, 2004. View at Google Scholar
  17. N. Showaiter and M. Youseffi, “Compaction, sintering and mechanical properties of elemental 6061 Al powder with and without sintering aids,” Materials & Design, vol. 29, no. 4, pp. 752–762, 2008. View at Google Scholar
  18. M. N. Rahaman, Ceramic Processing and Sintering, CRC Press, New York, NY, USA, 2nd edition, 2005.
  19. H. Masuda, K. Higashitani, and H. Yoshida, Powder Technology Handbook, Taylor and Francis group, New york, NY, USA, 3rd edition, 2006.
  20. H. Djohari, J. I. Martínez-Herrera, and J. J. Derby, “Transport mechanisms and densification during sintering: I. Viscous flow versus vacancy diffusion,” Chemical Engineering Science, vol. 64, no. 17, pp. 3799–3809, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Djohari and J. J. Derby, “Transport mechanisms and densification during sintering: II. Grain boundaries,” Chemical Engineering Science, vol. 64, no. 17, pp. 3810–3816, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. P. F. Stableinjr and G. C. Kuczynskit, “Sintering in multicomponent metallic systems,” Acta Metallurgica, vol. 11, no. 12, pp. 1327–1337, 1963. View at Google Scholar
  23. R. E. Reed-Hill and R. Abbaschian, Physical Metallurgy Principles, PWS Pub. Co., Boston, UK, 3rd edition, 1994.
  24. R. W. Balluffi and L. L. Seigle, “Growth of voids in metals during diffusion and creep,” Acta Metallurgica, vol. 5, no. 8, pp. 449–454, 1957. View at Google Scholar · View at Scopus
  25. R. S. Barnes, “The climb of edge dislocations in face-centred cubic crystals,” Acta Metallurgica, vol. 2, no. 3, pp. 380–385, 1954. View at Google Scholar · View at Scopus
  26. K. I. Hirano, R. P. Agarwala, and M. Cohen, “Diffusion of iron, nickel and cobalt in aluminum,” Acta Metallurgica, vol. 10, no. 9, pp. 857–863, 1962. View at Google Scholar · View at Scopus
  27. A. Olszówka-Myalska, J. Szala, and J. Cwajna, “Characterization of iron aluminides formed in situ in an aluminium matrix composite,” Materials Characterization, vol. 56, no. 4-5, pp. 379–383, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. D. K. Mukhopadhyay, C. Suryanarayana, and F. H. Froes, “Structural evolution in mechanically alloyed Al-Fe powders,” Metallurgical and Materials Transactions A, vol. 26, no. 8, pp. 1939–1946, 1995. View at Publisher · View at Google Scholar · View at Scopus