Table of Contents
ISRN Civil Engineering
Volume 2012 (2012), Article ID 202171, 14 pages
http://dx.doi.org/10.5402/2012/202171
Research Article

Behavior and Analysis of Self-Consolidated Reinforced Concrete Deep Beams Strengthened in Shear

Civil Engineering Department, Faculty of Engineering, Menoufiya University, Shebin El-kom, Egypt

Received 29 October 2011; Accepted 17 November 2011

Academic Editors: K. Pilakoutas and P. Qiao

Copyright © 2012 Kh. M. Heiza et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Russo, R. Venir, and M. Pauletta, “Reinforced concrete deep beams—shear strength model and design formula,” ACI Structural Journal, vol. 102, no. 3, pp. 429–437, 2005. View at Google Scholar · View at Scopus
  2. S. M. Soliman, Behavior and Analysis of Reinforced Concrete Deep Beams, M.S. thesis, Menoufiya University, Egypt, 2003.
  3. G. Aguilar, A. B. Matamoros, G. J. Parra-Montesinos, J. A. Ramírez, and J. K. Wight, “Experimental evaluation of design procedures for shear strength of deep reinforced concrete beams,” ACI Structural Journal, vol. 99, no. 4, pp. 539–548, 2002. View at Google Scholar · View at Scopus
  4. D. M. Rogowsky and J. G. Macgregor, “Shear Strength of Deep Reinforced Concrete Continuous Beams,” Structural Engineering Report 110, Department of Civil Engineering, University of Alberta, Canada, 1983. View at Google Scholar
  5. J. K. Oh and S. W. Shin, “Shear strength of reinforced high-strength concrete deep beams,” ACI Structural Journal, vol. 98, no. 2, pp. 164–173, 2001. View at Google Scholar · View at Scopus
  6. J. W. Park and D. Kuchma, “Strut-and-tie model analysis for strength prediction of deep beams,” ACI Structural Journal, vol. 104, no. 6, pp. 657–666, 2007. View at Google Scholar · View at Scopus
  7. M. D. Brown and O. Bayrak, “Design of deep beams using strut-and-tie models—part II: design recommendations,” ACI Structural Journal, vol. 105, no. 4, pp. 405–413, 2008. View at Google Scholar · View at Scopus
  8. M. D. Brown and O. Bayrak, “Design of deep beams using strut-and-tie models—part 1: evaluating U.S. provisions,” ACI Structural Journal, vol. 105, no. 4, pp. 395–404, 2008. View at Google Scholar · View at Scopus
  9. Egyptian Code of Practice: ECP 203-2007, “Design and Construction for Reinforced Concrete Structures,” Ministry of Building Construction, Research Center for Housing, Building and Physical Planning, Cairo, Egypt, 2007.
  10. ACI Committee 318-08, Building Code Requirements for Reinforced Concrete ACI 318-08 and Commentary, American Concrete Institute, Detroit, Mich, USA, 2008.
  11. Eurocode 2: DD ENV 1992-1-2-2004, Design of Concrete Structures—part 1: general Rules and Rules for Buildings, British Standard, BSI, 2004.
  12. D. A. Lange, L. J. Struble, and M. D. Dambrosia, “Performance and Acceptance of Self-Consolidating Concrete,” Research Report number FHWA-ICT-08-020, Illinois Center for Transportation, 2008. View at Google Scholar
  13. S. Ravindrarajah and F. Farrokhzadi, “Properties of Flowing Concrete and Self-Compacting Concrete with High-Performance Superplasticizer,” in Proceedings of the 3rd International RILEM Symposium, Reykjavik, Iceland, August, 2003.
  14. Z. A. Etman, Properties and Fields of Application of Self-Compacted Concrete, M.S. thesis, Menoufiya University, Egypt, 2004.
  15. Research Center for Housing, Building and Physical Planning, Cairo, Egypt. Strength of Material and Quality Control Department, “State-of-the Art-Report on Self-Compacting Concrete,” October 2002.
  16. H. Okamura and M. Ouchi, “Self-Compacting Concrete,” Journal Advanced Concrete Technology. Japan Concrete Institute, vol. 1, no. 1, 2003. View at Google Scholar
  17. M. Ouchi, S. A. Nakamura, T. Osterberg, S. E. Hallberg, and M. Lwin, “Applications of Self-Compacting Concrete in Japan,” Europe and the United States. I SHPC, 2003.
  18. P. D. Kiousis and B. L. Whitcomb, “Study on the Use of Self-Consolidating Concrete for the Repair of the Mead Bridges,” Report CDOT-2007-1, Interim Report, 2007. View at Google Scholar
  19. J. D. Trent, Transfer Length, Development Length, Flexural Strength, and Prestress Loss Evaluation in Pre-tensioned Self-Consolidating Concrete members, M.S. thesis, Faculty of the Virginia Polytechnic Institute and State University, 2007.
  20. B. Z. Dymond, Shear Strength of a PCBT-53 Girder Fabricated with Light-weight, Self-Consolidating Concrete, M.S. thesis, Faculty of the Virginia Polytechnic Institute and State University, 2007.
  21. M. G. Oliva and S. Cramer, “Self-Consolidating Concrete: Creep and Shrinkage Characteristics,” Report to Spancrete County Materials, Department of Civil and Environmental Engineering University of Madison, Wisconsin, Australia, 2008. View at Google Scholar
  22. N. N. Meleka, “Behavior of RC Deep Beams with Openings Strengthened in Shear Using Near Surface Mounted Reinforcement,” Civil Engineering Research Magazine, CERM, Al-Azhar University, vol. 29, no. 2, 2007. View at Google Scholar
  23. Kh. M. Heiza, M. M. Kamal, N. M. Meleka, and S. Elabouky, “Experimental Study on Repair and Strengthening of Self-Compacted RC Beams,” in Proceedings of the 6th Alexandria International Conference on Structural and Geotechnical Engineering, Alexandria, Egypt, April 2007.
  24. S. Rizkalla and T. Hassan, “Various FRP Strengthening Techniques for Retrofitting Concrete Structures,” in Proceedings of the International Conference on Concurrent Enterprising (ICE '01), Hong Kong, December 2001.
  25. Z. F. Chen, L. L. Wan, S. Lee et al., “Evaluation of CFRP, GFRP and BFRP material systems for the strengthening of RC slabs,” Journal of Reinforced Plastics and Composites, vol. 27, no. 12, pp. 1233–1243, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. H. Nordin, B. Taljsten, and A. Carolin, Concrete Structures Strengthened with Near Surface Mounted Reinforcement of CFRP, Licentiate Thesis, Lulea University of Technology, Sweden, 2003.
  27. R. El-Hacha and S. H. Rizkalla, “Near-surface-mounted fiber-reinforced polymer reinforcements for flexural strengthening of concrete structures,” ACI Structural Journal, vol. 101, no. 5, pp. 717–726, 2004. View at Google Scholar · View at Scopus
  28. L. De Lorenzis, K. Lundgren, and A. Rizzo, “Anchorage length of near-surface mounted fiber-reinforced polymer bars for concrete strengthening—experimental investigation and numerical modeling,” ACI Structural Journal, vol. 101, no. 2, pp. 269–278, 2004. View at Google Scholar · View at Scopus
  29. L. De Lorenzis and A. Nanni, “Shear strengthening of reinforced concrete beams with near-surface mounted fiber-reinforced polymer rods,” ACI Structural Journal, vol. 98, no. 1, pp. 60–68, 2001. View at Google Scholar · View at Scopus
  30. J. Barros, J. Sena, S. Dias, D. Ferreira, and A. Fortes, “Near Surface Mounted CFRP-Based Technique for the Strengthening of Concrete Structures,” Jornada Técnica en Honor a Ravindra Gettu, 2004. View at Google Scholar
  31. N. Y. El-Wakkad, Strengthening of Reinforced Concrete Deep Beams using Near-Surface Mounted Technique (NSM), Ph.D. thesis, Menoufiya University, Egypt, 2008.
  32. Kh. M. Heiza, “Finite element analysis of reinforced concrete continuous beams strengthened by external layers,” Journal of American Science, vol. 7, no. 10, pp. 631–644, 2011. View at Google Scholar
  33. N. N. Meleka, Kh. M. Heiza, and N. Y. Elwakad, “Shear strengthening of self-consolidating reinforced concrete deep beam with a central opening,” Ain Shams Journal of Civil Engineering, vol. 1, no. 1, 2009. View at Google Scholar
  34. R. A. Hawileh, “Nonlinear finite element modeling of RC beams strengthened with NSM FRP rods,” Construction and Building Materials, vol. 27, no. 1, pp. 461–471, 2012. View at Publisher · View at Google Scholar
  35. K. -H. Yang and A. F. Ashour, “Aggregate interlock in lightweight concrete continuous deep beams,” Engineering Structures, vol. 33, no. 1, pp. 136–145, 2011. View at Publisher · View at Google Scholar
  36. M. Mohammadhassani, M. Z. Jumaat, and M. Jameel, “Experimental investigation to compare the modulus of rupture in high strength self compacting concrete deep beams and high strength concrete normal beams,” Construction and Building Materials, vol. 30, no. 3, pp. 265–273, 2012. View at Publisher · View at Google Scholar
  37. M. Mohammad, Z. Mohd, A. Ashraf, and J. Mohammed, “Failure modes and serviceability of high self compacting concrete deep beams,” Engineering Failure Analysis, vol. 18, pp. 2272–2281, 2011. View at Google Scholar