Table of Contents
ISRN Mechanical Engineering
Volume 2012 (2012), Article ID 208760, 10 pages
http://dx.doi.org/10.5402/2012/208760
Review Article

A Review of Additive Manufacturing

Department of Mechanical and Aerospace Engineering, University of Miami, Coral Gables, FL 33146, USA

Received 29 May 2012; Accepted 17 June 2012

Academic Editors: N. Anifantis and F. Findik

Copyright © 2012 Kaufui V. Wong and Aldo Hernandez. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Kaufui V. Wong and Aldo Hernandez, “A Review of Additive Manufacturing,” ISRN Mechanical Engineering, vol. 2012, Article ID 208760, 10 pages, 2012. doi:10.5402/2012/208760