Table of Contents
ISRN Mechanical Engineering
Volume 2012 (2012), Article ID 248989, 6 pages
http://dx.doi.org/10.5402/2012/248989
Research Article

Influence of Heat Treatment and Composition Variations on Microstructure, Hardness, and Wear Resistance of C 18000 Copper Alloy

1FES Cuautitlan, Universidad Nacional Autonoma de Mexico, Km 2.5 Carretera Cuautitlan-Teoloyucan, San Sebastian Xhala, Cuautitlan Izcalli, 54714 MEX, Mexico
2CIATEQ (Advanced Technology Center) Aeronautical Materials Group, Avenue Manantiales No. 23-A, 76246 Qro, Parque Industrial Bernardo Quintana, El Marquez Qro, Mexico

Received 19 January 2012; Accepted 7 February 2012

Academic Editors: B. Chan and F. Liu

Copyright © 2012 Ramon Osorio-Galicia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ramon Osorio-Galicia, Carlos Gomez-Garcia, Miguel Angel Alcantara, and Andres Herrera-Vazquez, “Influence of Heat Treatment and Composition Variations on Microstructure, Hardness, and Wear Resistance of C 18000 Copper Alloy,” ISRN Mechanical Engineering, vol. 2012, Article ID 248989, 6 pages, 2012. doi:10.5402/2012/248989