Table of Contents
ISRN Mechanical Engineering
Volume 2012, Article ID 248989, 6 pages
http://dx.doi.org/10.5402/2012/248989
Research Article

Influence of Heat Treatment and Composition Variations on Microstructure, Hardness, and Wear Resistance of C 18000 Copper Alloy

1FES Cuautitlan, Universidad Nacional Autonoma de Mexico, Km 2.5 Carretera Cuautitlan-Teoloyucan, San Sebastian Xhala, Cuautitlan Izcalli, 54714 MEX, Mexico
2CIATEQ (Advanced Technology Center) Aeronautical Materials Group, Avenue Manantiales No. 23-A, 76246 Qro, Parque Industrial Bernardo Quintana, El Marquez Qro, Mexico

Received 19 January 2012; Accepted 7 February 2012

Academic Editors: B. Chan and F. Liu

Copyright © 2012 Ramon Osorio-Galicia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Altunpak and Mustafa Y., “The effect of aging heat treatment on the sliding wear behaviour of Cu-Al-Fe alloys,” Materials and Design, vol. 30, no. 3, pp. 878–884, 2009. View at Publisher · View at Google Scholar
  2. G. Straffelini, L. Maines, M. Pellizzari, and P. Scardi, “Dry sliding wear of Cu-Be alloys,” Wear, vol. 259, no. 1–6, pp. 506–511, 2005. View at Publisher · View at Google Scholar
  3. Y. X. Yin and H. M. Wang, “Microstructure and wear resistance of Cuss-toughened Cr5Si3/CrSi metal silicide alloys,” Journal of Materials Research, vol. 20, no. 5, pp. 1122–1130, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. J. P. Tu, W. X. Qi, Y. Z. Yang et al., “Effect of aging treatment on the electrical sliding wear behavior of Cu-Cr-Zr alloy,” Wear, vol. 249, no. 10-11, pp. 1021–1027, 2001. View at Publisher · View at Google Scholar
  5. S. G. Jia, P. Liu, F. Z. Ren, B. H. Tian, M. S. Zheng, and G. S. Zhou, “Sliding wear behavior of copper alloy contact wire against copper-based strip for high-speed electrified railways,” Wear, vol. 262, no. 7-8, pp. 772–777, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. S. G. Jia, M. S. Zheng, P. Liu, F. Z. Ren, B. H. Tian, and G. S. Zhou, “Wear behavior of Cu-Ag-Cr alloy wire under electrical sliding,” Materials Science and Engineering A, vol. 428, no. 1-2, p. 358, 2006. View at Publisher · View at Google Scholar · View at Scopus
  7. L. L. Gao and X. H. Cheng, “Microstructure and dry sliding wear behavior of Cu-10%Al-4%Fe alloy produced by equal channel angular extrusion,” Wear, vol. 265, pp. 986–991, 2008. View at Google Scholar
  8. R. A. Poggie and J. J. Wert, “The role of oxidation in the friction and wear behavior of solid solution Cu-Al alloys in reciprocating sliding contact with sapphire and D2 tool steel,” Wear, vol. 156, no. 2, pp. 315–326, 1992. View at Google Scholar
  9. S. Z. Zhang, B. H. Jiang, and W. J. Ding, “Wear of Cu-15Ni-8Sn spinodal alloy,” Wear, vol. 264, no. 3-4, pp. 199–203, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. ASM International Metals Handbook, vol. 9, 2005.
  11. ASTM, Designation G99-95a Standard Test Method for Wear Testing With a Pin-On-Disk Apparatus, 2000.
  12. Annual Book of ASTM Standards, vol. 02.01 of Section 2, 1990.
  13. W. Walter, E. Ingerson, and F. Quentin, “Copper-nickel-silicon-chromium alloy having improved electrical conductivity,” USA Patent 4260435, 1981.
  14. R. G. Bayer, Mechanical wear fundamentals and testing, Marcel Dekker, New York, NY, USA, 2nd edition, 2004.