Table of Contents
ISRN Thermodynamics
Volume 2012 (2012), Article ID 308795, 7 pages
http://dx.doi.org/10.5402/2012/308795
Research Article

Avoiding or Promoting Graphite in Carbon-Rich Chromium-Containing CoNiFe Cast Alloys—Part 1: Preliminary Thermodynamic Exploration

Department of Chemistry and Physics of Solids and Surface, Institut Jean Lamour (UMR CNRS 7198), Faculty of Sciences and Technologies, University of Lorraine, Boulevard des Aiguillettes, BP 70239, 54506 Vandoeuvre-lès-Nancy, France

Received 2 February 2012; Accepted 2 March 2012

Academic Editors: A. Chagovetz and D. Chakrabarti

Copyright © 2012 Patrice Berthod. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. J. Donachie and S. J. Donachie, Superalloys : A Technical Guide, ASM International, Materials Park, 2nd edition, 2002.
  2. D. J. Young, High Temperature Oxidation and Corrosion of Metals, Elsevier, Amsterdam, The Netherlands, 2008.
  3. B. Roebuck and E. A. Almond, “Deformation and fracture processes and the physical metallurgy of WC-Co hardmetals,” International Materials Reviews, vol. 33, no. 2, pp. 90–110, 1988. View at Google Scholar · View at Scopus
  4. A. Klimpel, L. A. Dobrzański, A. Lisiecki, and D. Janicki, “The study of properties of Ni-W2C and Co-W2C powders thermal sprayed deposits,” Journal of Materials Processing Technology, vol. 164-165, pp. 1068–1073, 2005. View at Publisher · View at Google Scholar
  5. Z. T. Wang and H. H. Chen, “Microstructure and friction and wear behavior of induction clad Ni-based composite coating reinforced with micro- and nano-WC particulates,” Mocaxue Xuebao/Tribology, vol. 25, no. 3, pp. 203–206, 2005. View at Google Scholar · View at Scopus
  6. D. Zhang and X. Zhang, “Laser cladding of stainless steel with Ni-Cr3C2 and Ni-WC for improving erosive-corrosive wear performance,” Surface and Coatings Technology, vol. 190, no. 2-3, pp. 212–217, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. H. E. N. Stone, “Hardness, oxidation and constitution in chromium-iron alloys,” Journal of Materials Science, vol. 14, no. 12, pp. 2781–2786, 1979. View at Google Scholar · View at Scopus
  8. B. V. Cockeram, “Some observations of the influence of δ-ferrite content on the hardness, galling resistance, and fracture toughness of selected commercially available iron-based hardfacing alloys,” Metallurgical and Materials Transactions A, vol. 33, no. 11, pp. 3403–3419, 2002. View at Google Scholar · View at Scopus
  9. P. Berthod, O. Hestin, E. Souaillat, P. Lemoine, G. Michel, and L. Aranda, “Microstructures and hardness of M-30wt.%Cr—0 to 5wt.%C ternary alloys containing an increasing quantity of chromium carbides. Part 3: Cobalt-based alloys,” Annales de Chimie, vol. 36, no. 3, pp. 193–204, 2011. View at Google Scholar
  10. P. Berthod, E. Souaillat, O. Hestin, P. Lemoine, and Th. Schweitzer, “Microstructures and hardness of M-30wt.%Cr—0 to 5wt.%C ternary alloys containing an increasing quantity of chromium carbides. Part 1: Nickel-based alloys,” Annales de Chimie, vol. 35, no. 5, pp. 291–301, 2010. View at Google Scholar
  11. P. Berthod, A. Dia, M. Ba, P. Lemoine, and P. Villeger, “Microstructures and hardness of M-30wt.%Cr—0 to 5wt.%C ternary alloys containing an increasing quantity of chromium carbides. Part 2: Iron-based alloys,” Annales de Chimie, vol. 36, no. 1, pp. 27–36, 2011. View at Google Scholar
  12. Thermo-Calc version N, “Foundation for Computational Thermodynamics,” Stockholm, Sweden, Copyright (1993, 2000).
  13. A. Fernández Guillermet, “Critical evaluation of the thermodynamic properties of cobalt,” International Journal of Thermophysics, vol. 8, no. 4, pp. 481–510, 1987. View at Publisher · View at Google Scholar
  14. J. O. Andersson, “Thermodynamic properties of chromium,” International Journal of Thermophysics, vol. 6, no. 4, pp. 411–419, 1985. View at Publisher · View at Google Scholar · View at Scopus
  15. P. Gustafson, “An evaluation of the thermodynamic properties and the P, T phase diagram of carbon,” Carbon, vol. 24, no. 2, pp. 169–176, 1986. View at Google Scholar · View at Scopus
  16. A. Fernandez Guillermet, “Thermodynamic analysis of the Co-C system,” Materials Research and Advanced Techniques, vol. 78, no. 10, pp. 700–709, 1987. View at Google Scholar · View at Scopus
  17. J. O. Andersson, “Thermodynamic properties of Cr-C,” Calphad, vol. 11, no. 3, pp. 271–276, 1987. View at Google Scholar · View at Scopus
  18. A. Fernandez Guillermet, “Thermodynamic properties of the Fe-Co-C system,” Materials Research and Advanced Techniques, vol. 79, no. 5, pp. 317–329, 1988. View at Google Scholar · View at Scopus
  19. A. Dinsdale and T. Chart, MTDS SGTE NPL (scientific group thermodata europe, national physical laboratory, unpublished work, 1986.
  20. A. Gabriel, C. Chatillon, and I. Ansara, “Thermochemical and phase diagram analysis of the Ni-C, Co-C, and Co-Ni-C systems,” High Temperature Science, vol. 25, no. 1, pp. 17–54, 1988. View at Google Scholar · View at Scopus
  21. A. Fernandez Guillermet and P. Gustafson, “assessment of the thermodynamic properties and the (p,T) phase diagram of iron,” High Temperatures, vol. 16, no. 6, pp. 591–610, 1984. View at Google Scholar · View at Scopus
  22. J. O. Andersson and B. Sundman, “Thermodynamic properties of the CrFe system,” Calphad, vol. 11, no. 1, pp. 83–92, 1987. View at Google Scholar · View at Scopus
  23. P. Gustafson, “Thermodynamic evaluation of the Fe-C system,” Scandinavian Journal of Metallurgy, vol. 14, no. 5, pp. 259–267, 1985. View at Google Scholar · View at Scopus
  24. J. O. Andersson, “A thermodynamic evaluation of the Fe-Cr-C system,” Metallurgical Transactions A, vol. 19, no. 3, pp. 627–636, 1988. View at Publisher · View at Google Scholar · View at Scopus