Table of Contents
ISRN Renewable Energy
Volume 2012 (2012), Article ID 327296, 13 pages
http://dx.doi.org/10.5402/2012/327296
Research Article

Simulation of Switched Reluctance Generator in Low and Medium Speed Operations for Wind Energy Application

School of Engineering and Advanced Technology, Massey University, Tennent Drive, Palmerston North 4474, New Zealand

Received 5 April 2012; Accepted 10 July 2012

Academic Editors: H. K. Ozturk and M. Souliotis

Copyright © 2012 A. Arifin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. E. Schulz and K. M. Rahman, “High-performance digital PI current regulator for EV switched reluctance motor drives,” IEEE Transactions on Industry Applications, vol. 39, no. 4, pp. 1118–1126, 2003. View at Publisher · View at Google Scholar · View at Scopus
  2. W. Shuanghong, Z. Qionghua, M. Zhiyuan, and Z. Libing, “Implementation of a 50-kW four-phase switched reluctance motor drive system for hybrid electric vehicle,” IEEE Transactions on Magnetics, vol. 41, no. 1, pp. 501–504, 2005. View at Publisher · View at Google Scholar · View at Scopus
  3. X. D. Xue, K. W. E. Cheng, J. K. Lin et al., “Optimal control method of motoring operation for SRM drives in electric vehicles,” IEEE Transactions on Vehicular Technology, vol. 59, no. 3, pp. 1191–1204, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. X. D. Xue, K. W. E. Cheng, T. W. Ng, and N. C. Cheung, “Multi-objective optimization design of in-wheel switched reluctance motors in electric vehicles,” IEEE Transactions on Industrial Electronics, vol. 57, no. 9, pp. 2980–2987, 2010. View at Publisher · View at Google Scholar · View at Scopus
  5. S. R. MacMinn and W. D. Jones, “Very high speed switched-reluctance starter-generator for aircraft engine applications,” in Proceedings of the IEEE National Aerospace and Electronics Conference, pp. 1758–1764, Dayton, Ohio, USA, May 1989. View at Scopus
  6. E. Richter and C. Ferreira, “Performance evaluation of a 250 kW switched reluctance starter generator,” in Proceedings of the Conference Record of the IEEE Industry Applications, pp. 434–440, Orlando, Fla, USA, October 1995. View at Scopus
  7. Y. Wang, W.-W. Zhou, L. Yu, and X.-Y. Yang, “Research on the precise control method based on the new style PWM with variable pulse width,” in Proceedings of the International Conference on Embedded Software and Systems, pp. 488–495, Sichuan, China, July 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. D. Wen and L. Deliang, “A fast analytical model for an integrated switched reluctance starter/generator,” IEEE Transactions on Energy Conversion, vol. 25, no. 4, pp. 948–956, 2010. View at Publisher · View at Google Scholar · View at Scopus
  9. Q. Bingni, S. Jiancheng, L. Tao, and Z. Hongda, “Mutual coupling and its effect on torque waveform of even number phase switched reluctance motor,” in Proceedings of the 11th International Conference on Electrical Machines and Systems, pp. 3405–3410, Wuhan, China, October 2008. View at Scopus
  10. K. Ogawa, N. Yamamura, and M. Ishda, “Study for small size wind power generating system using switched reluctance generator,” in Proceedings of the IEEE International Conference on Industrial Technology, pp. 1510–1515, Mumbai, India, December 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. C. Hao, Z. Dong, and M. Xianjun, “Analysis of three-phase 12/8 structure switched reluctance motor drive,” in Proceedings of the IEEE International Symposium on Industrial Electronics Proceedings, pp. 781–785, Busan, Korea, June 2001. View at Scopus
  12. H. Zhao, Y. Lingzhi, P. Hanmei, and Z. Kunyan, “Research and control of SRG for variable-speed wind energy applications,” in Proceedings of the IEEE 6th International Power Electronics and Motion Control Conference (IPEMC '09), pp. 2238–2243, Wuhan, China, May 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. A. Fleury, D. Andrade, E. S. L. Oliveira et al., “Study on an alternative converter performance for switched reluctance generator,” in Proceedings of the 34th Annual Conference of the IEEE Industrial Electronics Society, pp. 1409–1414, Orlando, Fla, USA, November 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. P. C. Desai, M. Krishnamurthy, N. Schofield, and A. Emadi, “Novel switched reluctance machine configuration with higher number of rotor poles than stator poles: concept to implementation,” IEEE Transactions on Industrial Electronics, vol. 57, no. 2, pp. 649–659, 2010. View at Publisher · View at Google Scholar · View at Scopus
  15. H. C. Lovatt and J. M. Stephenson, “Influence of number of poles per phase in switched reluctance motors,” IEE Proceedings B, vol. 139, no. 4, pp. 307–314, 1992. View at Google Scholar · View at Scopus
  16. L. Moreau, M. Machmoum, and M. E. Zaïm, “Design of low-speed slotted switched reluctance machine for wind energy applications,” Electric Power Components and Systems, vol. 34, no. 10, pp. 1139–1156, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. M. A. Mueller, “Design and performance of a 20kW, 100rpm, switched reluctance generator for a direct drive wind energy converter,” in Proceedings of the IEEE International Conference on Electric Machines and Drives, pp. 56–63, San Antonio, Tex, USA, May 2005. View at Scopus
  18. M. A. Mueller, “Design of low speed switched reluctance machines for wind energy converters,” in Proceedings of the 9th International Conference on Electrical Machines and Drives, pp. 60–64, Canterbury, UK, September 1999. View at Scopus
  19. I. Kioskeridis and C. Mademlis, “Optimal efficiency control of switched reluctance generators,” IEEE Transactions on Power Electronics, vol. 21, no. 4, pp. 1062–1072, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. Y. Sozer and D. A. Torrey, “Closed loop control of excitation parameters for high speed switched-reluctance generators,” IEEE Transactions on Power Electronics, vol. 19, no. 2, pp. 355–362, 2004. View at Publisher · View at Google Scholar · View at Scopus
  21. P. Asadi, M. Ehsani, and B. Fahimi, “Design and control characterization of switched reluctance generator for maximum output power,” in Proceedings of the 21st Annual IEEE Applied Power Electronics Conference and Exposition, pp. 1639–1644, Dallas, Tex, USA, March 2006. View at Scopus
  22. I. Kioskeridis and C. Mademlis, “Maximum efficiency in single-pulse controlled switched reluctance motor drives,” IEEE Transactions on Energy Conversion, vol. 20, no. 4, pp. 809–817, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Takahashi, H. Goto, K. Nakamura, T. Watanabe, and O. Ichinokura, “Characteristics of 8/6 switched reluctance generator excited by suppression resistor converter,” IEEE Transactions on Magnetics, vol. 42, no. 10, pp. 3458–3460, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. A. Fleury, D. A. de Andrade, F. dos Santos e Silva, and J. L. Domingos, “Switched reluctance generator for complementary wind power generation in grid connection,” in Proceedings of the IEEE International Electric Machines & Drives Conference, pp. 465–470, Antalya, Turkey, May 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. H. Keunsoo, K. Rae-Young, and R. Ramu, “Position estimation in switched reluctance motor drives using the first switching harmonics through fourier series,” IEEE Transactions on Industrial Electronics, vol. 58, no. 12, pp. 5352–5360, 2011. View at Google Scholar
  26. C. Mademlis and I. Kioskeridis, “Gain-scheduling regulator for high-performance position control of switched reluctance motor drives,” IEEE Transactions on Industrial Electronics, vol. 57, no. 9, pp. 2922–2931, 2010. View at Publisher · View at Google Scholar · View at Scopus
  27. R. Cárdenas, R. Peña, M. Pérez, J. Clare, G. Asher, and P. Wheeler, “Control of a switched reluctance generator for variable-speed wind energy applications,” IEEE Transactions on Energy Conversion, vol. 20, no. 4, pp. 781–791, 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. B. Parreira, S. Rafael, A. J. Pires, and P. J. C. Branco, “Obtaining the magnetic characteristics of an 8/6 switched reluctance machine: from FEM analysis to the experimental tests,” IEEE Transactions on Industrial Electronics, vol. 52, no. 6, pp. 1635–1643, 2005. View at Publisher · View at Google Scholar · View at Scopus
  29. V. K. Sharma, S. S. Murthy, and B. Singh, “An improved method for the determination of saturation characteristics of switched reluctance motors,” IEEE Transactions on Instrumentation and Measurement, vol. 48, no. 5, pp. 995–1000, 1999. View at Google Scholar · View at Scopus
  30. P. Lobato, S. Rafael, J. Martins, and A. J. Pires, “Flux-linkage characteristics models for switched reluctance machines,” in Proceedings of the 36th Annual Conference of the IEEE Industrial Electronics Society (IECON '10), pp. 847–852, Glendale, Ariz, USA, November 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. Y. Hayashi and T. J. E. Miller, “A new approach to calculating core losses in the SRM,” IEEE Transactions on Industry Applications, vol. 31, no. 5, pp. 1039–1046, 1995. View at Publisher · View at Google Scholar · View at Scopus
  32. H. Hannoun, M. Hilairet, and C. Marchand, “Design of an SRM speed control strategy for a wide range of operating speeds,” IEEE Transactions on Industrial Electronics, vol. 57, no. 9, pp. 2911–2921, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. T. Raminosoa, B. Blunier, D. Fodorean, and A. Miraoui, “Design and optimization of a switched reluctance motor driving a compressor for a PEM fuel-cell system for automotive applications,” IEEE Transactions on Industrial Electronics, vol. 57, no. 9, pp. 2988–2997, 2010. View at Publisher · View at Google Scholar · View at Scopus