Table of Contents
ISRN Electronics
Volume 2012 (2012), Article ID 359759, 7 pages
http://dx.doi.org/10.5402/2012/359759
Research Article

Shaping Resistive Bend Sensors to Enhance Readout Linearity

Department of Electronics Engineering, Tor Vergata University, Via Politecnico 1, 00139 Rome, Italy

Received 27 September 2012; Accepted 18 October 2012

Academic Editors: J. Abu Qahouq and C. W. Chiou

Copyright © 2012 Giovanni Saggio et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Giovanni Saggio, Antonino Lagati, and Giancarlo Orengo, “Shaping Resistive Bend Sensors to Enhance Readout Linearity,” ISRN Electronics, vol. 2012, Article ID 359759, 7 pages, 2012. doi:10.5402/2012/359759