Table of Contents
ISRN Electronics
Volume 2012 (2012), Article ID 359759, 7 pages
http://dx.doi.org/10.5402/2012/359759
Research Article

Shaping Resistive Bend Sensors to Enhance Readout Linearity

Department of Electronics Engineering, Tor Vergata University, Via Politecnico 1, 00139 Rome, Italy

Received 27 September 2012; Accepted 18 October 2012

Academic Editors: J. Abu Qahouq and C. W. Chiou

Copyright © 2012 Giovanni Saggio et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Latessa, F. Brunetti, A. Reale, G. Saggio, and A. Di Carlo, “Piezoresistive behaviour of flexible PEDOT:PSS based sensors,” Sensors and Actuators B, vol. 139, no. 2, pp. 304–309, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. Images SI Inc., Staten Island NY, USA.
  3. “Flexpoint Sensor Systems Inc.,” South Draper UT, USA.
  4. R. Gentner and J. Classen, “Development and evaluation of a low-cost sensor glove for assessment of human finger movements in neurophysiological settings,” Journal of Neuroscience Methods, vol. 178, no. 1, pp. 138–147, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. L. Dipietro, A. M. Sabatini, and P. Dario, “A survey of glove-based systems and their applications,” IEEE Transactions on Systems, Man and Cybernetics C, vol. 38, no. 4, pp. 461–482, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. L. K. Simone, N. Sundarrajan, X. Luo, Y. Jia, and D. G. Kamper, “A low cost instrumented glove for extended monitoring and functional hand assessment,” Journal of Neuroscience Methods, vol. 160, no. 2, pp. 335–348, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. N. W. Williams, J. M. T. Penrose, C. M. Caddy, E. Barnes, D. R. Hose, and P. Harley, “A goniometric glove for clinical hand assessment. Construction, calibration and validation,” Journal of Hand Surgery, vol. 25, no. 2, pp. 200–207, 2000. View at Publisher · View at Google Scholar · View at Scopus
  8. N. M. Noaman, A. R. Ajel, and A. A. Issa, “Design and implementation of DHM glove using variable resistors sensors,” Journal of Artificial Intelligence, vol. 1, no. 1, pp. 44–52, 2008. View at Google Scholar
  9. G. Saggio, “Mechanical model of flex sensors used to sense finger movements,” Sensors and Actuators A, vol. 185, pp. 53–58, 2012. View at Google Scholar
  10. G. Saggio, S. Bocchetti, C. A. Pinto, G. Latessa, and G. Orengo, “Non uniform geometry bend sensors exploited for biomedical systems,” in Proceedings of the International Conference on Bio-Inspired Systems and Signal Processing (BIOSIGNALS '11), pp. 389–392, Rome, Italy, January 2011. View at Scopus
  11. G. Saggio, M. De Sanctis, E. Cianca, G. Latessa, F. De Santis, and F. Giannini, “Long term measurement of human joint movements for health care and rehabilitation purposes,” in Proceedings of the 1st International Conference on Wireless Communication, Vehicular Technology, Information Theory and Aerospace and Electronic Systems Technology (Wireless VITAE '09), pp. 674–678, Aalborg, Denmark, May 2009. View at Publisher · View at Google Scholar · View at Scopus