Table of Contents
ISRN Civil Engineering
Volume 2012, Article ID 459016, 5 pages
http://dx.doi.org/10.5402/2012/459016
Research Article

Steel Slag as an Aggregate Replacement in Malaysian Hot Mix Asphalt

1Department of Geotechnics and Transportation, Faculty of Civil Engineering, Universiti Teknologi Malaysia, 81310 Skudai, Johor, Malaysia
2Department of Civil and Structural Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor, Malaysia

Received 12 July 2012; Accepted 2 August 2012

Academic Editors: D. Huang and I. G. Raftoyiannis

Copyright © 2012 Mohd Rosli Hainin et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Ahmedzade and B. Sengoz, “Evaluation of steel slag coarse aggregate in hot mix asphalt concrete,” Journal of Hazardous Materials, vol. 165, no. 1–3, pp. 300–305, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. S. L. See, “Steel slag used in the construction industry,” Nat Steel Chemicals Ltd., 1998.
  3. A. R. Lee, Blast Furnace and Steel Slag: Production, Properties and Uses, Edward Arnold, London, UK, 1974.
  4. U. Bagampadde, H. I. Al-Abdul Wahhab, and S. A. Aiban, “Optimization of steel slag aggregates for bituminous mixes in Saudi Arabia,” Journal of Materials in Civil Engineering, vol. 11, no. 1, pp. 30–35, 1999. View at Publisher · View at Google Scholar · View at Scopus
  5. A. S. Noureldin and R. S. McDaniel, “Evaluation of surface mixtures of steel slag and asphalt,” in Transportation Research Record 1296, pp. 133–139, National Academy Press, 1990. View at Google Scholar
  6. T. L. Ramirez, “Steel slag aggregates in bituminous mixtures,” Research Project No. 74012, 1992.
  7. B. Lemass, “Slag solutions for heavy duty road pavements,” in Proceedings of the 16th Australian Road Research Board Conference, Part 2 (ARRB '92), pp. 105–118, November 1992. View at Scopus
  8. S. Wu, Y. Xue, Q. Ye, and Y. Chen, “Utilization of steel slag as aggregates for stone mastic asphalt (SMA) mixtures,” Building and Environment, vol. 42, no. 7, pp. 2580–2585, 2007. View at Publisher · View at Google Scholar · View at Scopus
  9. G. D. Airey, A. C. Collop, N. H. Thom, S. E. Zoroob, and A. Shiratori, “Laboratory evaluation of secondary aggregates in bituminous mixtures,” Journal of the Association of Asphalt Paving Technologists, vol. 73, pp. 731–770, 2004. View at Google Scholar
  10. J. J. Emery, “Slag utilization in pavement construction,” in Extending Aggregate Resources, pp. 95–118, ASTM STP 774, American Society for Testing and Materials, 1982. View at Google Scholar
  11. A. R. Lee, Blast Furnace and Steel Slag: Production, Properties and Uses, Halsted Press, New York, NY, USA, 1975.
  12. A. S. Noureldin and R. S. McDaniel, “Performance evaluation of steel slag furnace slag- natural sand asphalt surface mixtures,” Journal of the Association of Asphalt Paving Technologists, vol. 68, pp. 276–303, 1990. View at Google Scholar
  13. D. A. Anderson and J. J. Henry, “Synthetic aggregates for skid resistance surface courses,” Transportation Research Record, no. 712, pp. 61–68, 1979. View at Google Scholar · View at Scopus
  14. J. Ryell, J. T. Corkill, and G. R. Musgrove, “Skid resistance of bituminous pavement test sections: Toronto by-pass project,” Transportation Research Record, no. 712, pp. 51–61, 1979. View at Google Scholar · View at Scopus
  15. P. S. Kandhal and G. L. Hoffman, “Evaluation of steel slag fine aggregate in hot-mix asphalt mixtures,” Transportation Research Record, no. 1583, pp. 28–36, 1997. View at Google Scholar · View at Scopus
  16. S. Michael, A. C. Bruce, and D. Andrew, “Investigation of recycled martial asphalt pavement (RAP) mixtures,” Minnesota Department of Transportation, USA, 2002.
  17. P. Lavin, Asphalt Pavements: A Practical Guide to Design, Production and Maintenance for Engineers and Architects, Taylor and Francis Group, New York, NY, USA, 2003.
  18. R. A. Jimenez, “ASPHALT: mixture design method to minimize rutting,” Transportation Research Record, no. 1417, pp. 109–116, 1993. View at Google Scholar