Table of Contents
ISRN Civil Engineering
Volume 2012 (2012), Article ID 475751, 8 pages
http://dx.doi.org/10.5402/2012/475751
Research Article

Effects of Hybrid Polypropylene-Steel Fiber Addition on Some Hardened Properties of Lightweight Concrete with Pumice Breccia Aggregate

1Civil Engineering Department, Diponegoro University, Semarang 50241, Indonesia
2Civil and Environmental Engineering Department, Gadjah Mada University, Yogyakarta 55281, Indonesia

Received 4 November 2012; Accepted 28 November 2012

Academic Editors: M. Maslehuddin and A. A. Torres-Acosta

Copyright © 2012 Slamet Widodo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. EuroLightCon, Definitions and International Consensus Report, European Union-Brite EuRam III, 1998.
  2. National Standardization Body of Indonesia, SNI: 03-2847-2002: Design Procedure of Concrete Structures For Buildings, the National Standardization Body, Bandung, Indonesia, (In Indonesian).
  3. S. M. F. Green, N. J. Brooke, L. G. McSaveney, and J. M. Ingham, “Mixture design development and performance verification of structural lightweight pumice aggregate concrete,” Journal of Materials in Civil Engineering, vol. 23, no. 8, pp. 1211–1219, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. N. Kabay and F. Akoz, “Effect of prewetting methods on some fresh and hardened properties of concrete with pumice aggregate,” Cement & Concrete Composites, vol. 34, no. 4, pp. 503–507, 2011. View at Publisher · View at Google Scholar
  5. L. Xiaopeng, Structural lightweight with pumice aggregate [M.S. thesis], National University of Singapore, 2005.
  6. S. F. U. Ahmed, M. Maalej, and P. Paramasivam, “Flexural responses of hybrid steel-polyethylene fiber reinforced cement composites containing high volume fly ash,” Construction and Building Materials, vol. 21, pp. 1088–1097, 2007. View at Google Scholar
  7. F. Altun, T. Haktanir, and K. Ari, “Effects of steel fiber addition on mechanical properties of concrete and RC beams,” Construction and Building Materials, vol. 21, no. 3, pp. 654–661, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. N. Banthia and N. Nandakumar, “Crack growth resistance of hybrid fiber reinforced cement composites,” Cement and Concrete Composites, vol. 25, no. 1, pp. 3–9, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Sivakumar and M. Santhanam, “Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres,” Cement and Concrete Composites, vol. 29, no. 8, pp. 603–608, 2007. View at Publisher · View at Google Scholar · View at Scopus
  10. National Standardization Body of Indonesia, SNI: 15-0302-2004: Pozzolan Portland Cement, the National Standardization Body, Bandung, Indonesia, 2004, (In Indonesian).
  11. J. Newman and B. S. Choo, Advanced Concrete Technology (Processes), Elsevier, Oxford, UK, 2003.
  12. M. Hassanpour, P. Shafigh, and H. Bin Mahmud, “Lightweight aggregate concrete fiber reinforcement–a review,” Construction and Building Materials, vol. 37, pp. 452–461, 2012. View at Google Scholar
  13. A. Sadrmomtazi, M. A. Mirgozar Langeroudi, A. Fasihi, and A. K. Haghi, “An investigation on effect of using PP fibers and different cementitious materials on mechanical properties of EPS concrete,” in Proceeding of 3rd International Conference on Concrete & Development, pp. 1035–1044, 2009.
  14. ASTM C-143, C-469, C-496, and C-293, “Annual Book of ASTM Standard, Volume 04. 02: Concrete and Aggregates,” ASTM International, West Conshohocken, Pa, USA, http://www.astm.org/.
  15. British Standard, Concrete—Complementary British Standard to BS EN 206-1-Part 1: Method of Specifying and Guidance for the Specifier, BS, 8500-1:2006, BSI, 2006.