Table of Contents
ISRN Civil Engineering
Volume 2012 (2012), Article ID 501816, 9 pages
http://dx.doi.org/10.5402/2012/501816
Research Article

Finite Element Simulation on Punching Shear Behavior of Reinforced Concrete Slabs

1Engineering Office, Bangladesh University of Engineering and Technology (BUET), Dhaka 1000, Bangladesh
2Department of Civil Engineering, Bangladesh University of Engineering and Technology (BUET), Dhaka 1000, Bangladesh

Received 25 July 2012; Accepted 4 September 2012

Academic Editors: D. Huang and I. Smith

Copyright © 2012 A. K. M. Jahangir Alam and Khan Mahmud Amanat. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Salim and W. M. Sebastian, “Punching shear failure in reinforced concrete slabs with compressive membrane action,” ACI Structural Journal, vol. 100, no. 4, pp. 471–479, 2003. View at Google Scholar · View at Scopus
  2. J. S. Lovrovich and D. I. McLean, “Punching shear behavior of slabs with varying span-depth ratios,” ACI Structural Journal, vol. 87, no. 5, pp. 507–511, 1990. View at Google Scholar · View at Scopus
  3. A. K. M. J. Alam, K. M. Amanat, and S. M. Seraj, “Experimental investigation of edge restraint on punching shear behaviour of RC slabs,” The IES Journal Part A, vol. 2, no. 1, pp. 35–46, 2009. View at Google Scholar
  4. J. S. Kuang and C. T. Morley, “Punching shear behavior of restrained reinforced concrete slabs,” ACI Structural Journal, vol. 89, no. 1, pp. 13–19, 1992. View at Google Scholar · View at Scopus
  5. M. B. D. Hueste and J. K. Wight, “Nonlinear punching shear failure model for interior slab-column connections,” Journal of Structural Engineering, vol. 125, no. 9, pp. 997–1008, 1999. View at Google Scholar · View at Scopus
  6. W. Wang and S. Teng, “Finite-element analysis of reinforced concrete flat plate structures by layered shell element,” Journal of Structural Engineering, vol. 134, no. 12, pp. 1862–1872, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. C. Loo and H. Guan, “Cracking and punching shear failure analysis of RC flat plates,” Journal of Structural Engineering, vol. 123, no. 10, pp. 1321–1330, 1997. View at Google Scholar · View at Scopus
  8. F. J. Vecchio and M. P. Collins, “The modified compression field theory for reinforced concrete elements subjected to shear,” Journal of the American Concrete Institute, vol. 83, no. 2, pp. 219–231, 1986. View at Google Scholar · View at Scopus
  9. R. G. Selby and F. J. Vecchio, “Three-dimensional constitutive relations for reinforced concrete,” Tech. Rep. 93-02, University of Toronto, Department of Civil Engineering, Toronta, Canada, 1993. View at Google Scholar
  10. C. G. Bailey, W. S. Toh, and B. M. Chan, “Simplified and advanced analysis of membrane action of concrete slabs,” ACI Structural Journal, vol. 105, no. 1, pp. 30–40, 2008. View at Google Scholar · View at Scopus
  11. W. Dilger, G. Birkle, and D. Mitchell, “Effect of flexural reinforcement on punching shear resistance,” in Punching Shear in Reinforced Concrete Slabs, SP-232-4, pp. 57–74, American Concrete Institute, 2005. View at Google Scholar
  12. N. J. Gardner, “ACI 318-05, CS A23.3-04, eurocode 2 (2003), DIN 1045-1 (2001), BS 8110-97 and CEB-FIP MC 90 provisions for punching shear of reinforced concrete flat slabs,” in Punching Shear in Reinforced Concrete Slabs, SP-232-1, pp. 1–22, American Concrete Institute, 2005. View at Google Scholar
  13. Y. Tan and S. Teng, “Interior slab-rectangular column connections under biaxial lateral loading,” in Punching Shear in Reinforced Concrete Slabs, SP-232-9, pp. 147–174, American Concrete Institute, 2005. View at Google Scholar
  14. TNO DIANA BV, DIANA Finite Element Analysis User's Manual Release 8.1, TNO DIANA BV, Delft, The Netherlands, 2nd edition, 2003.
  15. H. Hofmeyer and A. A. van den Bos, “Total strain fe model for reinforced concrete floors on piles,” Structural Design of Tall and Special Buildings, vol. 17, no. 4, pp. 809–822, 2008. View at Publisher · View at Google Scholar · View at Scopus
  16. E. Thorenfeldt, A. Tomaszewicz, and J. J. Jensen, “Mechanical properties of high-strength concrete and applications in design,” in Proceedings of the Symposium on Utilization of High-Strength Concrete (Stavanger, Norway), Tapir, Trondheim, Norway, 1987. View at Google Scholar
  17. H. W. Reinhardt, “Fracture mechanics of an elastic softening material like concrete,” Heron, vol. 29, no. 2, 1984. View at Google Scholar · View at Scopus
  18. D. A. Hordijk, Local approach to fatigue of concrete [Ph.D. thesis], Delft University of Technology, 1991.