Table of Contents
ISRN Polymer Science
Volume 2012 (2012), Article ID 630642, 9 pages
http://dx.doi.org/10.5402/2012/630642
Research Article

Optimization of PET Glycolysis Process by Response Surface Methodological Approach: A Two-Component Modelling Using Glycolysis Time and Temperature

1Department of Chemical Technology, Sant Longowal Institute of Engineering & Technology, Punjab, Sangrur 148106, India
2RM & CD, Corporate Research & Development Centre, Apollo Tyres Ltd., Limda, Gujarat, Vadodara 391760, India
3Department of Polymer Science & Technology, University of Calcutta, 92, A. P. C. Road, Kolkata 700009, India
4Department of Food Engineering and Technology, Sant Longowal Institute of Engineering & Technology, Punjab, Sangrur 148106, India

Received 30 January 2012; Accepted 26 February 2012

Academic Editors: A. Granville, A. Varesano, and S. Yamazaki

Copyright © 2012 Sunain Katoch et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. Paszun and T. Spychaj, “Chemical recycling of poly(ethylene terephthalate),” Industrial and Engineering Chemistry Research, vol. 36, no. 4, pp. 1373–1383, 1997. View at Google Scholar · View at Scopus
  2. U. R. Vaidya and V. M. Nadkarni, “Polyester polyols for polyurethanes from pet waste. Kinetics of polycondensation,” Journal of Applied Polymer Science, vol. 35, no. 3, pp. 775–785, 1988. View at Google Scholar · View at Scopus
  3. J. R. Campanelli, M. R. Kamal, and D. G. Cooper, “Kinetic study of the hydrolytic degradation of polyethylene terephthalate at high temperatures,” Journal of Applied Polymer Science, vol. 48, no. 3, pp. 443–451, 1993. View at Publisher · View at Google Scholar · View at Scopus
  4. J. R. Campanelli, D. G. Cooper, and M. R. Kamal, “Catalyzed hydrolysis of polyethylene terephthalate melts,” Journal of Applied Polymer Science, vol. 53, no. 8, pp. 985–991, 1994. View at Publisher · View at Google Scholar · View at Scopus
  5. G. P. Karayannidis, A. P. Chatziavgoustis, and D. S. Achilias, “Poly(ethylene terephthalate) recycling and recovery of pure terephthalic acid by alkaline hydrolysis,” Advances in Polymer Technology, vol. 21, no. 4, pp. 250–259, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. S. Baliga and W. T. Wong, “Depolymerization of poly(ethylene terephthalate) recycled from post-consumer soft-drink bottles,” Journal of Polymer Science Part A, vol. 27, no. 6, pp. 2071–2082, 1989. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Y. Chen, C. F. Ou, Y. C. Hu, and C. C. Lin, “Depolymerization of poly (ethylene terephthalate) resin under pressure,” Journal of Applied Polymer Science, vol. 42, no. 6, pp. 1501–1507, 1991. View at Publisher · View at Google Scholar · View at Scopus
  8. D. A. Heyman and O. M. Grace, “High polymer content graft polyols,” Journal of Cellular Plastics, vol. 21, no. 2, pp. 101–104, 1985. View at Google Scholar · View at Scopus
  9. M. Dannoux, P. Cassagnau, and A. Michel, “Synthesis of oligoester α,ω-diols by alcoholysis of PET through the reactive extrusion process,” Canadian Journal of Chemical Engineering, vol. 80, no. 6, pp. 1075–1082, 2002. View at Google Scholar · View at Scopus
  10. J. S. Canaday and M. J. Skowronski, “Comparison of aromatic polyester polyols for rigid urethane and isocyanurate foam,” Journal of Cellular Plastics, vol. 21, no. 5, pp. 338–344, 1985. View at Google Scholar · View at Scopus
  11. R. H. Myers and D. C. Montgomery, Response Surface Methodology: Process and Product Optimization Using Designed Experiments, Wiley, New York, NY, USA, 1995.
  12. M. Kincl, S. Turk, and F. Vrečer, “Application of experimental design methodology in development and optimization of drug release method,” International Journal of Pharmaceutics, vol. 291, no. 1-2, pp. 39–49, 2005. View at Publisher · View at Google Scholar · View at PubMed · View at Scopus
  13. T. R. Kukreja, D. Kumar, K. Prasad, R. C. Chauhan, S. Choe, and P. P. Kundu, “Optimisation of physical and mechanical properties of rubber compounds by response surface methodology—two component modelling using vegetable oil and carbon black,” European Polymer Journal, vol. 38, no. 7, pp. 1417–1422, 2002. View at Publisher · View at Google Scholar · View at Scopus
  14. P. P. Kundu, “Improvement of filler-rubber interaction by the coupling action of vegetable oil in carbon black reinforced rubber,” Journal of Applied Polymer Science, vol. 75, no. 6, pp. 735–739, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. P. P. Kundu and T. R. Kukreja, “Surface modification of carbon black by vegetable oil—its effect on the rheometric, hardness, abrasion, rebound resilience, tensile, tear, and adhesion properties,” Journal of Applied Polymer Science, vol. 84, no. 2, pp. 256–260, 2002. View at Publisher · View at Google Scholar · View at Scopus
  16. C. F. Jeff Wu and M. Hamada, Experiments Planning, Analysis, and Parameter Design Optimization, Wiley, New York, NY, USA, 2000.
  17. F. Mahdi, A. A. Khan, and H. Abbas, “Physiochemical properties of polymer mortar composites using resins derived from post-consumer PET bottles,” Cement and Concrete Composites, vol. 29, no. 3, pp. 241–248, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. G. Tersac, F. Hubert, G. Durand, J. Quillerou, J. Rivéro, and J. C. Maréchal, “Polyols by polyestérification of glycolysis products of polyethyleneterephthalate, Their Physicochemical Properties and Resultant Polyurethane Foams,” Cellular Polymers, vol. 14, no. 1, pp. 14–40, 1995. View at Google Scholar · View at Scopus
  19. B. H. Stuart, Polymer Analysis, vol. 116, chapter 4, John Wiley & Sons, New York, NY, USA, 2002.
  20. D. C. Montgomery, Design and Analysis of Experiments, vol. 229, chapters 6 and 7, John Wiley & Sons, New York, NY, USA, 1991.
  21. F. Hubert, G. Durand, and G. Tersac, “Equilibria in the alcoholysis reactions of terephthalic esters and chemical valorization of polyethyleneterephthalate waste—I. Equilibrium constants determination,” Journal of Applied Polymer Science, vol. 72, no. 3, pp. 329–340, 1999. View at Google Scholar · View at Scopus
  22. G. Cüçlü, A. Kaşgöz, S. Özbudak, S. Özgümüş, and M. Orbay, “Glycolysis of poly(ethylene terephthalate) wastes in xylene,” Journal of Applied Polymer Science, vol. 69, no. 12, pp. 2311–2319, 1998. View at Google Scholar · View at Scopus
  23. K. H. Yoon, M. H. Kwon, M. H. Jeon, and O. O. Park, “Diffusion of ethylene glycol in solid state poly(ethylene terephthalate),” Polymer Journal, vol. 25, no. 3, pp. 219–226, 1993. View at Google Scholar · View at Scopus