Table of Contents
ISRN Dentistry
Volume 2012, Article ID 680587, 10 pages
http://dx.doi.org/10.5402/2012/680587
Research Article

Evaluation of Micromovements and Stresses around Single Wide-Diameter and Double Implants for Replacing Mandibular Molar: A Three-Dimensional FEA

Department of Periodontology & Implantology, H.K.E. Society’s S. Nijalingappa Institute of Dental Sciences and Research, Gulbarga, PIN 585 105, India

Received 3 November 2011; Accepted 15 December 2011

Academic Editors: G. V. Kulkarni and G. Sjogren

Copyright © 2012 Shrikar R. Desai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. A. Zarb and A. Schmitt, “The longitudinal clinical effectiveness of osseointegrated dental implants: the Toronto study. Part I: surgical results,” The Journal of Prosthetic Dentistry, vol. 63, no. 4, pp. 451–457, 1990. View at Google Scholar · View at Scopus
  2. R. Haas, N. Mensdorff-Pouilly, G. Mailath, and G. Watzek, “Br{right parenthesis, less than}nemark single tooth implants: a preliminary report of 76 implants,” The Journal of Prosthetic Dentistry, vol. 73, no. 3, pp. 274–279, 1995. View at Google Scholar · View at Scopus
  3. C. Aparicio and P. Orozco, “Use of 5-mm-diameter implants: periotest values related to a clinical and radiographic evaluation,” Clinical Oral Implants Research, vol. 9, no. 6, pp. 398–406, 1998. View at Google Scholar · View at Scopus
  4. W. J. Seong, T. W. P. Korioth, and J. S. Hodges, “Experimentally induced abutment strains in three types of single-molar implant restorations,” Journal of Prosthetic Dentistry, vol. 84, no. 3, pp. 318–326, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. T. J. Balshi, R. E. Hernandez, M. C. Pryszlak, and B. Rangert, “A comparative study of one implant versus two replacing a single molar,” International Journal of Oral and Maxillofacial Implants, vol. 11, no. 3, pp. 372–378, 1996. View at Google Scholar · View at Scopus
  6. C. M. Jeong, A. A. Caputo, R. S. Wylie, S. C. Son, and Y. C. Jeon, “Bicortically stabilized implant load transfer,” International Journal of Oral and Maxillofacial Implants, vol. 18, no. 1, pp. 59–65, 2003. View at Google Scholar · View at Scopus
  7. P. P. Binon, “Evaluation of the effectiveness of a technique to prevent screw loosening,” Journal of Prosthetic Dentistry, vol. 79, no. 4, pp. 430–432, 1998. View at Publisher · View at Google Scholar · View at Scopus
  8. K. B. Tan and J. I. Nicholls, “Implant-abutment screw joint preload of 7 hex-top abutment systems,” International Journal of Oral and Maxillofacial Implants, vol. 16, no. 3, pp. 367–377, 2001. View at Google Scholar · View at Scopus
  9. J. P. Geng, K. B. C. Tan, and G. R. Liu, “Application of finite element analysis in implant dentistry: a review of the literature,” Journal of Prosthetic Dentistry, vol. 85, no. 6, pp. 585–598, 2001. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Geramy and S. M. Morgano, “Finite element analysis of three designs of an implant-supported molar crown,” Journal of Prosthetic Dentistry, vol. 92, no. 5, pp. 434–440, 2004. View at Publisher · View at Google Scholar · View at Scopus
  11. D. C. Freeman, Root surface area related to anchorage in the begg technique, Ph.D. thesis, University of Tennessee, Memphis, Tenn, USA, 1965.
  12. B. Rangert, P. H. Krogh, B. Langer, and N. Van Roekel, “Bending overload and implant fracture: a retrospective clinical analysis,” The International Journal of Oral & Maxillofacial Implants, vol. 10, no. 3, pp. 326–334, 1995. View at Google Scholar · View at Scopus
  13. O. Bahat and M. Handelsman, “Use of wide implants and double implants in the posterior jaw: a clinical report,” International Journal of Oral and Maxillofacial Implants, vol. 11, no. 3, pp. 379–386, 1996. View at Google Scholar · View at Scopus
  14. B. Langer, L. Langer, I. Herrmann, and L. Jorneus, “The wide fixture: a solution for special bone situations and a rescue for the compromised implant. Part 1,” The International Journal of Oral & Maxillofacial Implants, vol. 8, no. 4, pp. 400–408, 1993. View at Google Scholar · View at Scopus
  15. S. L. Graves, C. E. Jansen, A. A. Siddiqui, and K. D. Beaty, “Wide diameter implants: indications, considerations and preliminary results over a two-year period,” Australian Prosthodontic Journal, vol. 8, pp. 31–37, 1994. View at Google Scholar · View at Scopus
  16. F. Renouard and F. Riachi, “Apport des implants de 5 mm de diametre en implantologie orale,” Implantologie, vol. 24, pp. 2069–2076, 1994. View at Google Scholar
  17. J. Robinson, Understanding Finite Element Stress Analysis, Winbornde Robinson and Associates, Dorset, UK, 1981.
  18. O. C. Zienkiewicz and R. Taylor, “Basic formulations and linear methods,” in The Finite Element Method, O. C. Zienkiewicz and R. Taylor, Eds., McGraw-Hill, London, UK, 4th edition, 1988. View at Google Scholar
  19. L. Pierrisnard, G. Hure, M. Barquins, and D. Chappard, “Two dental implants designed for immediate loading: a finite element analysis,” International Journal of Oral and Maxillofacial Implants, vol. 17, no. 3, pp. 353–362, 2002. View at Google Scholar · View at Scopus
  20. M. M. Ash and S. J. Nelson, Wheeler’s Dental Anatomy, Physiology, and Occlusion, Elsevier, St. Louis, Mo, USA, 8th edition, 2003.
  21. H. L. Huang, C. H. Chang, J. T. Hsu, A. M. Fallgatter, and C. C. Ko, “Comparison of implant body designs and threaded designs of dental implants: a 3-dimensional finite element analysis,” International Journal of Oral and Maxillofacial Implants, vol. 22, no. 4, pp. 551–562, 2007. View at Google Scholar · View at Scopus
  22. W. J. O’Brien, Dental Materials and Their Selection, Quintessence, Chicago, Ill, USA, 2nd edition, 2002.
  23. H. S. Yang, L. A. Lang, A. Molina, and D. A. Felton, “The effects of dowel design and load direction on dowel-and-core restorations,” Journal of Prosthetic Dentistry, vol. 85, no. 6, pp. 558–567, 2001. View at Publisher · View at Google Scholar · View at Scopus
  24. M. R. Rieger, K. Fareed, W. K. Adams, and R. A. Tanquist, “Bone stress distribution for three endosseous implants,” The Journal of Prosthetic Dentistry, vol. 61, no. 2, pp. 223–228, 1989. View at Google Scholar · View at Scopus
  25. C. J. Ivanoff, L. Sennerby, C. Johansson, B. Rangert, and U. Lekholm, “Influence of implant diameters on the integration of screw implants: an experimental study in rabbits,” International Journal of Oral and Maxillofacial Surgery, vol. 26, no. 2, pp. 141–148, 1997. View at Google Scholar · View at Scopus
  26. S. E. Eckert, S. J. Meraw, A. L. Weaver, and C. M. Lohse, “Early experience with wide-platform Mk II implants. Part I: implant survival. Part II: evaluation of risk factors involving implant survival,” International Journal of Oral and Maxillofacial Implants, vol. 16, no. 2, pp. 208–216, 2001. View at Google Scholar · View at Scopus
  27. G. Polizzi, B. Rangert, U. Lekholm, F. Gualini, and H. Lindström, “Brånemark System Wide Platform implants for single molar replacement: clinical evaluation of prospective and retrospective materials,” Clinical Implant Dentistry and Related Research, vol. 2, no. 2, pp. 61–69, 2000. View at Google Scholar · View at Scopus
  28. N. J. Attard and G. A. Zarb, “Implant prosthodontic management of partially edentulous patients missing posterior teeth: the Toronto experience,” Journal of Prosthetic Dentistry, vol. 89, no. 4, pp. 352–359, 2003. View at Publisher · View at Google Scholar · View at Scopus
  29. E. P. Holmgren, R. J. Seckinger, L. M. Kilgren, and F. Mante, “Evaluating parameters of osseointegrated dental implants using finite element analysis–a two-dimensional comparative study examining the effects of implant diameter, implant shape, and load direction,” The Journal of Oral Implantology, vol. 24, no. 2, pp. 80–88, 1998. View at Google Scholar · View at Scopus
  30. A. P. Saadoun, D. Y. Sullivan, M. Krischek, and M. Le Gall, “Single tooth implant—management for success,” Practical Periodontics and Aesthetic Dentistry, vol. 6, no. 3, pp. 73–82, 1994. View at Google Scholar · View at Scopus
  31. X. Ding, S. H. Liao, X. H. Zhu, X. H. Zhang, and L. Zhang, “Effect of diameter and length on stress distribution of the alveolar crest around immediate loading implants,” Clinical Implant Dentistry and Related Research, vol. 11, no. 4, pp. 279–287, 2009. View at Publisher · View at Google Scholar · View at Scopus
  32. C. S. Petrie and J. L. Williams, “Comparative evaluation of implant designs: influence of diameter, length, and taper on strains in the alveolar crest—a three-dimensional finite-element analysis,” Clinical Oral Implants Research, vol. 16, no. 4, pp. 486–494, 2005. View at Publisher · View at Google Scholar · View at Scopus
  33. W. J. O’Brien, Dental Materials and Their Selection, Quintessence, Chicago, Ill, USA, 2nd edition, 1997.
  34. K. R. Williams, C. J. Watson, W. M. Murphy, J. Scott, M. Gregory, and D. Sinobad, “Finite element analysis of fixed prostheses attached to osseointegrated implants,” Quintessence International, vol. 21, no. 7, pp. 563–570, 1990. View at Google Scholar · View at Scopus
  35. R. M. Cibirka, M. E. Razzoog, B. R. Lang, and C. S. Stohler, “Determining the force absorption quotient for restorative materials used in implant occlusal surfaces,” The Journal of Prosthetic Dentistry, vol. 67, no. 3, pp. 361–364, 1992. View at Google Scholar · View at Scopus
  36. T. Albrektsson, P. I. Brånemark, H. A. Hansson, and J. Lindstrom, “Osseointegrated titanium implants. Requirements for ensuring a long-lasting, direct bone-to-implant anchorage in man,” Acta Orthopaedica Scandinavica, vol. 52, no. 2, pp. 155–170, 1981. View at Google Scholar · View at Scopus
  37. R. M. Pilliar, J. M. Lee, and C. Maniatopoulos, “Observations on the effect of movement on bone ingrowth into porous-surfaced implants,” Clinical Orthopaedics and Related Research, vol. 208, pp. 108–113, 1986. View at Google Scholar · View at Scopus