Table of Contents
ISRN Mechanical Engineering
Volume 2012 (2012), Article ID 739384, 10 pages
http://dx.doi.org/10.5402/2012/739384
Research Article

A Cyclosymmetric Beam Model and a Spring-Supported Annular Plate Model for Automotive Disc Brake Vibration

Department of Aeronautical and Automotive Engineering, Loughborough University, Leicestershire LE11 3TU, UK

Received 30 May 2012; Accepted 25 June 2012

Academic Editors: R. Nagaosa and S. Shen

Copyright © 2012 Dennis Boennen and Stephen James Walsh. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. Chen, “Automotive disk brake squeal: an overview,” International Journal of Vehicle Design, vol. 51, no. 1-2, pp. 39–72, 2009. View at Google Scholar · View at Scopus
  2. F. Chen, A. T. Tan, and R. L. Quaglia, Disc Brake Squeal: Mechanisms, Analysis, Evaluation, and Reduction/Prevention, SAE International, 2006.
  3. H. Ouyang, W. Nack, Y. Yuan, and F. Chen, “Numerical analysis of automotive disc brake squeal: a review,” International Journal of Vehicle Noise and Vibration, vol. 1, pp. 207–231, 2005. View at Google Scholar
  4. N. M. Kinkaid, O. M. O'Reilly, and P. Papadopoulos, “Automotive disc brake squeal,” Journal of Sound and Vibration, vol. 267, no. 1, pp. 105–166, 2003. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Papinniemi, J. C. S. Lai, J. Zhao, and L. Loader, “Brake squeal: a literature review,” Applied Acoustics, vol. 63, no. 4, pp. 391–400, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. P. Ioannidis, P. C. Brooks, D. C. Barton, and M. Nishiwaki, “Brake system noise and vibration—a review,” Braking, pp. 53–73, 2002. View at Google Scholar
  7. M. Trichês Jr., S. N. Y. Gerges, and R. Jordan, “Analysis of brake squeal noise using the finite element method: a parametric study,” Applied Acoustics, vol. 69, no. 2, pp. 147–162, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Dai and T. C. Lim, “Suppression of brake squeal noise applying finite element brake and pad model enhanced by spectral-based assurance criteria,” Applied Acoustics, vol. 69, no. 3, pp. 196–214, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Flint and J. Hultén, “Lining-deformation-induced modal coupling as squeal generator in a distributed parameter disc brake model,” Journal of Sound and Vibration, vol. 254, no. 1, pp. 1–21, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Flint, “Modelling of high-frequency disc-brake squeal,” Brakes, pp. 39–50, 2000. View at Google Scholar
  11. H. Ouyang, J. E. Mottershead, M. P. Cartmell, and M. I. Friswell, “Friction-induced parametric resonances in discs: effect of a negative friction-velocity relationship,” Journal of Sound and Vibration, vol. 209, no. 2, pp. 251–264, 1998. View at Google Scholar · View at Scopus
  12. H. Ouyang and J. E. Mottershead, “Unstable travelling waves in the friction-induced vibration of discs,” Journal of Sound and Vibration, vol. 248, no. 4, pp. 768–779, 2001. View at Publisher · View at Google Scholar · View at Scopus
  13. H. Ouyang, Q. Cao, J. E. Mottershead, and T. Treyde, “Vibration and squeal of a disc brake: modelling and experimental results,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 217, no. 10, pp. 867–875, 2003. View at Publisher · View at Google Scholar · View at Scopus
  14. Q. Cao, H. Ouyang, M. I. Friswell, and J. E. Mottershead, “Linear eigenvalue analysis of the disc-brake squeal problem,” International Journal for Numerical Methods in Engineering, vol. 61, no. 9, pp. 1546–1563, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. J. C. Bae and J. A. Wickert, “Free vibration of coupled disk-hat structures,” Journal of Sound and Vibration, vol. 235, no. 1, pp. 117–132, 2000. View at Publisher · View at Google Scholar · View at Scopus
  16. S. Bashmal, R. Bhat, and S. Rakheja, “Frequency equations for the in-plane vibration of circular annular disks,” Advances in Acoustics and Vibration, vol. 2010, Article ID 501902, 8 pages, 2010. View at Publisher · View at Google Scholar
  17. D. Boennen, Analytical beam and annular plate models for automotive disc brake vibration [Ph.D. thesis], Loughborough University, 2008.
  18. D. Boennen and S. J. Walsh, “Investigation of analytical beam and annular plate models for automotive disc brake vibration,” Braking, pp. 264–274, 2006. View at Google Scholar
  19. L. Cremer, M. Heckl, and E. E. Ungar, Structure-Borne Sound: Structural Vibrations and Sound Radiation at Audio Frequencies, Springer, 1988.
  20. S. M. Vogel and D. W. Skinner, “Natural frequencies of transversely vibrating uniform annular plates,” Journal of Applied Mechanics, vol. 32, pp. 926–931, 1965. View at Google Scholar
  21. A. W. Leissa, Vibration of Plates, NASA SP-160, Ohio State University, 1969.
  22. R. V. Southwell, “On the free vibration of a uniform circular disc clamped at its centre; and on the effects of rotation,” Proceedings of the Royal Society, vol. 101, pp. 133–153, 1928. View at Google Scholar
  23. C. T. Wang, Applied Elasticity, McGraw-Hill, 1953.
  24. S. J. Walsh and R. G. White, “Mobility of a semi-infinite beam with constant curvature,” Journal of Sound and Vibration, vol. 221, no. 5, pp. 887–902, 1999. View at Google Scholar · View at Scopus
  25. D. Thompson, Railway Noise and Vibration: Mechanisms, Modelling and Means of Control, Elsevier Science, 2008.
  26. M. Neubauer and R. Oleskiewicz, “Brake squeal control with shunted piezoceramics—efficient modelling and experiments,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 222, no. 7, pp. 1141–1151, 2008. View at Publisher · View at Google Scholar · View at Scopus