Research Article
Effect of Some Manfacturing Parameters on Machining of Extruded Al-Al2O3 Composites
Table 1
Cutting tools used in the experiments.
| Type of the tool | Cutting tool designation | Cutting fluids | Cutting speed (m/min) | Depth of cut (mm) |
| Carbide tool | TPUN110408 116 | Dry | 54, 67, 80 | 0.1 | Coating tool | TPUN110408 116 | Dry | 54, 67, 80 | 0.1 |
|
|