Table of Contents
ISRN Corrosion
Volume 2013, Article ID 231035, 14 pages
http://dx.doi.org/10.1155/2013/231035
Research Article

Microstructural Characteristics and Mechanical Properties of Nanostructured and Conventional TiAlN and AlCrN Coatings on ASTM-SA210 Grade A-1 Boiler Steel

D.A.V. College of Engineering and Technology, Kanina 123027, India

Received 12 June 2013; Accepted 4 July 2013

Academic Editors: S. J. Lee, Q. Qu, and R. Solmaz

Copyright © 2013 Vikas Chawla. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. V. H. Hidalgo, J. B. Varela, A. C. Menéndez, and S. P. Martínez, “High temperature erosion wear of flame and plasma-sprayed nickel-chromium coatings under simulated coal-fired boiler atmospheres,” Wear, vol. 247, no. 2, pp. 214–222, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. V. H. Hidalgo, F. J. B. Varela, A. C. Menéndez, and S. P. Martínez, “A comparative study of high-temperature erosion wear of plasma-sprayed NiCrBSiFe and WC-NiCrBSiFe coatings under simulated coal-fired boiler conditions,” Tribology International, vol. 34, no. 3, pp. 161–169, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. B. S. Sidhu, D. Puri, and S. Prakash, “Mechanical and metallurgical properties of plasma sprayed and laser remelted Ni-20Cr and Stellite-6 coatings,” Journal of Materials Processing Technology, vol. 159, no. 3, pp. 347–355, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. J. R. Nicholls, N. J. Simms, W. Y. Chan, and H. E. Evans, “Smart overlay coatings: concept and practice,” Surface and Coatings Technology, vol. 149, no. 2-3, pp. 236–244, 2002. View at Publisher · View at Google Scholar · View at Scopus
  5. V. Chawla, S. Prakash, D. Puri, and B. Singh, “State of Art: corrosion in thermal power plants and preventive measures: a review,” in Proceedings of the National Conference on Advancement & Futuristic Trends in Mechanical & Materials Engineering, G.Z.S. College of Engineering anf Technology, Bathinda, India, October 2006.
  6. V. Chawla, S. Prakash, D. Puri, and B. Singh, “Plasma sprayed coatings for protection against hot Corrosion: a review,” in Proceedings of the of International Conference on Advances in Mechanical Engineering (AME '06), Baba Banda Singh Bahadaur College of Engineering, Fatehgarh Sahib, India, December 2006.
  7. J. T. DeMasi-Marcin and D. K. Gupta, “Protective coatings in the gas turbine engine,” Surface and Coatings Technology, vol. 68-69, no. C, pp. 1–9, 1994. View at Google Scholar · View at Scopus
  8. H. O. Pierson, “CVD/PVD coatngs,” in ASM Handbook: Corrosion, J. R. Davis, Ed., vol. 13, pp. 456–458, ASM International, Materials Park, Ohio, USA, 1987. View at Google Scholar
  9. P. Fauchais, “Topical Review: understanding plasma spraying,” Journal of Physics D, vol. 37, no. 9, pp. R86–R108, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. V. Chawla, S. Prakash, D. Puri, and B. Singh, “State of art: hot corrosion: a review,” in Proceedings of the Global Conference on Production and Industrial Engineering (CPIE '07), B.R. Ambedkar National Institute of Technology, Jalandhar, India, March 2007.
  11. J. L. He, K. C. Chen, C. C. Chen, A. Leyland, and A. Matthews, “Cyclic oxidation resistance of Ni-Al alloy coatings deposited on steel by a cathodic arc plasma process,” Surface and Coatings Technology, vol. 135, no. 2-3, pp. 158–165, 2001. View at Publisher · View at Google Scholar · View at Scopus
  12. V. Chawla, S. Prakash, D. Puri, and B. Singh, “Corrosion behaviour of nanostructured TiAlN and AlCrN hard coatings on Superfer 800H superalloy in simulated marine environment,” Journal of Minerals and Materials Characterization and Engineering, vol. 8, no. 9, pp. 693–700, 2009. View at Google Scholar
  13. V. Chawla, D. Puri, S. Prakash, A. Chawla, and B. Singh, “Characterization and comparison of corrosion behaviour of nanostructured TiAlN and AlCrN coatings on Superfer 800H (INCOLOY 800H) substrate,” Journal of Minerals and Materials Characterization and Engineering, vol. 8, no. 9, pp. 715–727, 2009. View at Google Scholar
  14. V. Chawla, S. Prakash, and B. S. Sidhu, “State of the art: applications of mechanically alloyed nanomaterials: a review,” Materials and Manufacturing Processes, vol. 22, no. 4, pp. 469–473, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. V. Chawla, B. S. Sidhu, D. Puri, and S. Prakash, “Performance of plasma sprayed nanostructured and conventional coatings,” Journal of the Australian Ceramic Society, vol. 44, no. 2, pp. 56–62, 2008. View at Google Scholar · View at Scopus
  16. V. Chawla, S. Prakash, D. Puri, and B. Singh, “State of art: plasma sprayed nanostructured coatings: a review,” Materials Forum, vol. 32, pp. 137–143, 2008. View at Google Scholar · View at Scopus
  17. B. S. Sidhu, D. Puri, and S. Prakash, “Characterisations of plasma sprayed and laser remelted NiCrAlY bond coats and Ni3Al coatings on boiler tube steels,” Materials Science and Engineering A, vol. 368, no. 1-2, pp. 149–158, 2004. View at Publisher · View at Google Scholar · View at Scopus
  18. H. C. Chen, Z. Y. Liu, and Y. C. Chuang, “Degradation of plasma-sprayed alumina and zirconia coatings on stainless steel during thermal cycling and hot corrosion,” Thin Solid Films, vol. 223, no. 1, pp. 56–64, 1993. View at Google Scholar · View at Scopus
  19. L. C. Erickson, R. Westergård, U. Wiklund, N. Axén, H. M. Hawthorne, and S. Hogmark, “Cohesion in plasma-sprayed coatings: a comparison between evaluation methods,” Wear, vol. 214, no. 1, pp. 30–37, 1998. View at Google Scholar · View at Scopus
  20. V. Higuera Hidalgo, F. J. Belzunce Varela, and A. Carrilez Menendez, “Characterization and high temperature behaviour of thermal sprayed coatings used in boilers,” in Proceedings of the 15th International Thermal Spray Conference, pp. 617–621, Nice, france, May 1998. View at Scopus
  21. V. H. Hidalgo, F. J. B. Varela, S. P. Martinez, and S. G. Espana, “Characterization and high temperature behaviour of Cr3C2-NiCr plasma sprayed coatings,” in Proceedings of the United Thermal Spray Conference, pp. 683–686, Germany, 1999.
  22. H. Singh, D. Puri, and S. Prakash, “Some studies on hot corrosion performance of plasma sprayed coatings on a Fe-based superalloy,” Surface and Coatings Technology, vol. 192, no. 1, pp. 27–38, 2005. View at Publisher · View at Google Scholar · View at Scopus
  23. T. S. Sidhu, R. D. Agrawal, and S. Prakash, “Hot corrosion of some superalloys and role of high-velocity oxy-fuel spray coatings: a review,” Surface and Coatings Technology, vol. 198, no. 1–3, pp. 441–446, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. Y. H. Yoo, D. P. Le, J. G. Kim, S. K. Kim, and P. V. Vinh, “Corrosion behavior of TiN, TiAlN, TiAlSiN thin films deposited on tool steel in the 3.5 wt.% NaCl solution,” Thin Solid Films, vol. 516, no. 11, pp. 3544–3548, 2008. View at Publisher · View at Google Scholar · View at Scopus
  25. C. V. Falub, A. Karimi, M. Ante, and W. Kalss, “Interdependence between stress and texture in arc evaporated Ti-Al-N thin films,” Surface and Coatings Technology, vol. 201, no. 12, pp. 5891–5898, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. B. Y. Man, L. Guzman, A. Miotello, and M. Adami, “Microstructure, oxidation and H2-permeation resistance of TiAlN films deposited by DC magnetron sputtering technique,” Surface and Coatings Technology, vol. 180-181, pp. 9–14, 2004. View at Publisher · View at Google Scholar · View at Scopus
  27. A. E. Reiter, V. H. Derflinger, B. Hanselmann, T. Bachmann, and B. Sartory, “Investigation of the properties of Al1-xCrxN coatings prepared by cathodic arc evaporation,” Surface and Coatings Technology, vol. 200, no. 7, pp. 2114–2122, 2005. View at Publisher · View at Google Scholar · View at Scopus
  28. J. L. Endrino, G. S. Fox-Rabinovich, and C. Gey, “Hard AlTiN, AlCrN PVD coatings for machining of austenitic stainless steel,” Surface and Coatings Technology, vol. 200, no. 24, pp. 6840–6845, 2006. View at Publisher · View at Google Scholar · View at Scopus
  29. B. D. Cullity, Elements of X-Ray Diffraction, Addison-Wesley, Reading, Mass, USA, 1970.
  30. S. Adachi and K. Nakata, “Improvement of adhesive strength of Ti-Al plasma-sprayed coatings,” Surface and Coatings Technology, vol. 201, pp. 5617–5620, 2007. View at Google Scholar
  31. R. C. Tucker Jr., “Advanced thermal spray deposition techniques,” in Handbook of Deposition Technologies For Films and Coatings, R. F. Bunshah, Ed., chapter 11, Noyes Publications, Park Ridge, NJ, USA; William Andrew Publishing, New York, NY, USA, 1994. View at Google Scholar
  32. P. Vuoristo, K. Niemi, A. Makela, and T. Mantyla, “Abrasion and erosion wear resistance of Cr3C2-NiCr coatings prepared by plasma, detonation and high-velocity oxyfuel spraying,” in Proceedings of the 7th National Thermal Spray Conference, pp. 121–126, Boston, Mass, USA, 1994.
  33. H. Chen and I. M. Hutchings, “Abrasive wear resistance of plasma-sprayed tungsten carbide-cobalt coatings,” Surface and Coatings Technology, vol. 107, no. 2-3, pp. 106–114, 1998. View at Publisher · View at Google Scholar · View at Scopus
  34. R. Westergård, L. C. Erickson, N. Axén, H. M. Hawthorne, and S. Hogmark, “The erosion and abrasion characteristics of alumina coatings plasma sprayed under different spraying conditions,” Tribology International, vol. 31, no. 5, pp. 271–279, 1998. View at Google Scholar · View at Scopus
  35. V. Higuera Hidalgo, F. J. Belzunce Varela, and E. Fernández Rico, “Erosion wear and mechanical properties of plasma-sprayed nickel- and iron-based coatings subjected to service conditions in boilers,” Tribology International, vol. 30, no. 9, pp. 641–649, 1997. View at Google Scholar · View at Scopus
  36. V. Higuera Hidalgo, J. Belzunce Varela, J. Martínez De La Calle, and A. Carriles Menéndez, “Characterisation of NiCr flame and plasma sprayed coatings for use in high temperature regions of boilers,” Surface Engineering, vol. 16, no. 2, pp. 137–142, 2000. View at Google Scholar · View at Scopus
  37. M. H. Staia, T. Valente, C. Bartuli, D. B. Lewis, and C. P. Constable, “Part I: characterization of Cr3C2-25% NiCr reactive plasma sprayed coatings produced at different pressures,” Surface and Coatings Technology, vol. 146-147, pp. 553–562, 2001. View at Publisher · View at Google Scholar · View at Scopus
  38. S. T. Bluni and A. R. Marder, “Effects of thermal spray coating composition and microstructure on coating response and substrate protection at high temperatures,” Corrosion, vol. 52, no. 3, pp. 213–218, 1996. View at Google Scholar · View at Scopus
  39. S. Deshpande, S. Sampath, and H. Zhang, “Mechanisms of oxidation and its role in microstructural evolution of metallic thermal spray coatings: case study for Ni-Al,” Surface and Coatings Technology, vol. 200, no. 18-19, pp. 5395–5406, 2006. View at Publisher · View at Google Scholar · View at Scopus
  40. H. Herman, Plasma Sprayed Coatings, Scientific American, 1988.
  41. K. Korpiola and P. Vuoristo, “Effect of HVOF gas velocity and fuel to oxygen ratio on the wear properties of tungsten carbide coating,” in Thermal Spray: Practical Solutions For Engineering Problems, C. C. Bernt, Ed., Cincinnati, Ohio, USA, 1996. View at Google Scholar
  42. J. E. Nerz, B. A. Kushner, and A. J. Rotolico, “Microstructural evaluation of tungsten carbide-cobalt coatings,” Journal of Thermal Spray Technology, vol. 1, no. 2, pp. 147–152, 1992. View at Publisher · View at Google Scholar
  43. B. Wang, R. F. Huang, G. H. Song et al., “Interdiffusion behavior of Ni-Cr-Al-Y coatings deposited by arc-ion plating,” Oxidation of Metals, vol. 56, no. 1-2, pp. 1–13, 2001. View at Google Scholar · View at Scopus