Table of Contents
ISRN Tribology
Volume 2013 (2013), Article ID 240239, 7 pages
http://dx.doi.org/10.5402/2013/240239
Research Article

The Effects of Trapezoidal Groove on a Self-Acting Fluid-Lubricated Herringbone Grooves Journal Bearing

1Tochigi R&D Center, Keihin-Corp, Hoshakuji 2021-8, Takanezawa-Machi, Shioya-gun, Tochigi, Japan
2Department of International Development Engineering, Graduate School of Science and Engineering, Tokyo Institute of Technology, Meguro-ku, Tokyo 152, Japan

Received 12 May 2012; Accepted 10 July 2012

Academic Editors: J. Awrejcewicz, C.-H. Chien, M. Dular, J. H. Jang, F. Nair, and J. Wang

Copyright © 2013 Jun Liu and Yoshihiro Mochimaru. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. H. Vohr and C. H. T. Pan, “On The Spiral-grooved, Self-acting Gas Bearing,” MTI63TR52, 1963.
  2. B. J. Hamrock and D. P. Fleming, “Optimization of Self-acting Herringbone Grooved Journal Bearings for Maximum Radial Load Capacity,” NASA-TM-X-52945, 1971.
  3. S. Murata, Y. Miyake, and N. Kawabata, “Two-dimensional analysis of herringbone groove journal bearing,” Bulletin of the JSME, vol. 23, no. 181, pp. 1980–1987, 1980. View at Google Scholar · View at Scopus
  4. D. Bonneau and J. Absi, “Analysis of aerodynamic journal bearings with small number of herringbone grooves by finite element method,” Journal of Tribology, vol. 116, no. 4, pp. 698–704, 1994. View at Google Scholar · View at Scopus
  5. G. H. Jang and D. I. Chang, “Analysis of a hydrodynamic herringbone grooved journal bearing considering cavitation,” Journal of Tribology, vol. 122, no. 1, pp. 103–109, 2000. View at Publisher · View at Google Scholar · View at Scopus
  6. J. Liu and Y. Mochimaru, “Analysis of oil-lubricated herringbone grooved journal bearing with trapezoidal cross-section, using a spectral finite difference method,” Journal of Hydrodynamics B, vol. 22, no. 5, supplement 1, pp. 408–412, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. G. G. Hirs, “The load capacity and stability characteristics of hydro-dynamic grooved journal bearing,” ASLE Transaction, vol. 8, pp. 296–305, 1965. View at Google Scholar