Table of Contents
ISRN Environmental Chemistry
Volume 2013, Article ID 289071, 5 pages
http://dx.doi.org/10.1155/2013/289071
Research Article

Evaluation of Preoxidized SUS304 as a Catalyst for Hydrocarbon Reforming

Department of Chemical Engineering, Nagoya University, Chikusa, Nagoya 464-8603, Japan

Received 10 July 2013; Accepted 1 August 2013

Academic Editors: R. Gonzalez-Olmos, S. K. Kurunthachalam, and D. Sun

Copyright © 2013 S. R. de la Rama et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. U.S. Energy Information Administration, Short-term Energy Outlook, 2013, http://www.eia.gov/.
  2. Planet for Life, Current World Oil Situation, 2013, http://www.planetforlife.com/.
  3. K. Kawamoto, W. Wu, and H. Kuramochi, “Development of gasification and reforming technology using catalyst at lower temperature for effective energy recovery: hydrogen recovery using waste wood,” Journal of Environment and Engineering, vol. 4, no. 2, pp. 409–421, 2009. View at Google Scholar
  4. T. J. Wang, J. Chang, C. Z. Wu, Y. Fu, and Y. Chen, “The steam reforming of naphthalene over a nickel-dolomite cracking catalyst,” Biomass and Bioenergy, vol. 28, no. 5, pp. 508–514, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. O. S. Joo and K. D. Jung, “CH4 dry reforming on alumina-supported nickel catalyst,” Bulletin of the Korean Chemical Society, vol. 23, no. 8, pp. 1149–1153, 2002. View at Google Scholar · View at Scopus
  6. J. Han and H. Kim, “The reduction and control technology of tar during biomass gasification/pyrolysis: an overview,” Renewable and Sustainable Energy Reviews, vol. 12, no. 2, pp. 397–416, 2008. View at Publisher · View at Google Scholar · View at Scopus
  7. N. Gao, A. Li, C. Quan, Y. Qu, and L. Mao, “Characteristics of hydrogen-rich gas production of biomass gasification with porous ceramic reforming,” International Journal of Hydrogen Energy, vol. 37, no. 12, pp. 9610–9618, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Rapagná, H. Provendier, C. Petit, A. Kiennemann, and P. U. Foscolo, “Development of catalysts suitable for hydrogen or syn-gas production from biomass gasification,” Biomass and Bioenergy, vol. 22, no. 5, pp. 377–388, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Courson, E. Makaga, C. Petit, and A. Kiennemann, “Development of Ni catalysts for gas production from biomass gasification. Reactivity in steam- and dry-reforming,” Catalysis Today, vol. 63, no. 2–4, pp. 427–437, 2000. View at Publisher · View at Google Scholar · View at Scopus
  10. C. Courson, L. Udron, D. Świerczyński, C. Petit, and A. Kiennemann, “Hydrogen production from biomass gasification on nickel catalysts: tests for dry reforming of methane,” Catalysis Today, vol. 76, no. 1, pp. 75–86, 2002. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Guo, H. Lou, H. Zhao, D. Chai, and X. Zheng, “Dry reforming of methane over nickel catalysts supported on magnesium aluminate spinels,” Applied Catalysis A, vol. 273, no. 1-2, pp. 75–82, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. D. Dissanayake, M. P. Rosynek, K. C. C. Kharas, and J. H. Lunsford, “Partial oxidation of methane to carbon monoxide and hydrogen over a Ni/Al2O3 catalyst,” Journal of Catalysis, vol. 132, no. 1, pp. 117–127, 1991. View at Google Scholar · View at Scopus
  13. D. J. Moon, J. W. Ryu, S. D. Lee, B. G. Lee, and B. S. Ahn, “Ni-based catalyst for partial oxidation reforming of iso-octane,” Applied Catalysis A, vol. 272, no. 1-2, pp. 53–60, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Takano, T. Tagawa, and S. Goto, “Carbon deposition on supported nickel catalysts for carbon dioxide reforming of methane,” Journal of the Japan Petroleum Institute, vol. 39, no. 2, pp. 144–150, 1996. View at Google Scholar · View at Scopus
  15. E. Promaros, S. Assabumrungrat, N. Laosiripojana, P. Praserthdam, T. Tagawa, and S. Goto, “Carbon dioxide reforming of methane under periodic operation,” Korean Journal of Chemical Engineering, vol. 24, no. 1, pp. 44–50, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. M. Ito, T. Tagawa, and S. Goto, “Partial oxidation of methane on supported nickel catalysts,” Journal of Chemical Engineering of Japan, vol. 32, no. 3, pp. 274–279, 1999. View at Google Scholar · View at Scopus
  17. T. Tagawa, M. Ito, and S. Goto, “Combined reforming of methane with carbon dioxide and oxygen in molten carbonaceous fuel cell reactor,” Applied Organic Chemistry, vol. 15, pp. 127–134, 2001. View at Google Scholar
  18. F. Melo and N. Morlanés, “Naphtha steam reforming for hydrogen production,” Catalysis Today, vol. 107-108, pp. 458–466, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. N. Chikamatsu, T. Tagawa, and S. Goto, “Characterization of a new mixed oxide catalyst derived from hydrogen storage alloy,” Journal of Materials Science, vol. 30, no. 5, pp. 1367–1372, 1995. View at Publisher · View at Google Scholar · View at Scopus
  20. N. Chikamatsu, T. Tagawa, and S. Goto, “Reaction pathway and selective hydrogenation on catalysts derived from oxidation treatment of Mg2Cu alloy,” Bulletin of Chemical Society Japan, vol. 67, no. 6, pp. 1548–1552, 1994. View at Google Scholar
  21. N. Laosiripojana and S. Assabumrungrat, “Catalytic dry reforming of methane over high surface area ceria,” Applied Catalysis B, vol. 60, no. 1-2, pp. 107–116, 2005. View at Publisher · View at Google Scholar · View at Scopus