Table of Contents
ISRN Corrosion
Volume 2013, Article ID 464710, 9 pages
http://dx.doi.org/10.1155/2013/464710
Research Article

Corrosion Study of Powder-Coated Galvanised Steel

R&D and Scientific Services, TATA Steel Ltd., Jamshedpur 831001, India

Received 31 December 2012; Accepted 3 February 2013

Academic Editors: C.-H. Hsu and S. Umoren

Copyright © 2013 Manish Kumar Bhadu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. K. Guin, S. Nayak, T. K. Rout, N. Bandyopadhyay, and D. K. Sengupta, “Corrosion resistance nano-hybrid sol-gel coating on steel sheet,” ISIJ International, vol. 51, no. 3, pp. 435–440, 2011. View at Publisher · View at Google Scholar · View at Scopus
  2. A. S. Khanna, Introduction to High Temperature Oxidation and Corrosion, ASM International, 1997.
  3. B. V. Jegdić, J. B. Bajat, J. P. Popić, and V. B. Mišković-Stanković, “Corrosion stability of polyester coatings on steel pretreated with different iron-phosphate coatings,” Progress in Organic Coatings, vol. 70, no. 2-3, pp. 127–133, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. A. M. P. Simões, R. O. Carbonari, A. R. Di Sarli, B. del Amo, and R. Romagnoli, “An environmentally acceptable primer for galvanized steel: formulation and evaluation by SVET,” Corrosion Science, vol. 53, no. 1, pp. 464–472, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. R. Mafi, S. M. Mirabedini, M. M. Attar, and S. Moradian, “Cure characterization of epoxy and polyester clear powder coatings using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Thermal Analysis (DMTA),” Progress in Organic Coatings, vol. 54, no. 3, pp. 164–169, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. D. Maetens, “Weathering degradation mechanism in polyester powder coatings,” Progress in Organic Coatings, vol. 58, no. 2-3, pp. 172–179, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. J. B. Bajat, J. P. Popić, and V. B. Mišković-Stanković, “The influence of aluminium surface pretreatment on the corrosion stability and adhesion of powder polyester coating,” Progress in Organic Coatings, vol. 69, no. 4, pp. 316–321, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. M. A. J. Batista, R. P. Moraes, J. C. S. Barbosa, P. C. Oliveira, and A. M. Santos, “Effect of the polyester chemical structure on the stability of polyester-melamine coatings when exposed to accelerated weathering,” Progress in Organic Coatings, vol. 71, no. 3, pp. 265–273, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. F. L. Duivenvoorde, J. Laven, and R. Van der Linde, “Diblock copolymer dispersants in polyester powder coatings,” Progress in Organic Coatings, vol. 45, no. 2-3, pp. 127–137, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. S. Radhakrishnan, N. Sonawane, and C. R. Siju, “Epoxy powder coatings containing polyaniline for enhanced corrosion protection,” Progress in Organic Coatings, vol. 64, no. 4, pp. 383–386, 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. V. C. Malshe and G. Waghoo, “Weathering study of epoxy paints,” Progress in Organic Coatings, vol. 51, no. 4, pp. 267–272, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. R. Van der Linde, E. G. Belder, and D. Y. Perera, “Effect of physical aging and thermal stress on the behavior of polyester/TGIC powder coatings,” Progress in Organic Coatings, vol. 40, no. 1–4, pp. 215–224, 2000. View at Publisher · View at Google Scholar · View at Scopus
  13. Technical Data Sheet of Ridoline 1352 BA, of M/s Henkel Chembond India Ltd.
  14. Technical Data Sheet of Granodine, of M/s Henkel Chembond India Ltd.
  15. M. Özcan, I. Dehri, and M. Erbil, “EIS study of the effect of high levels of SO2 on the corrosion of polyester-coated galvanised steel at different relative humidities,” Progress in Organic Coatings, vol. 44, no. 4, pp. 279–285, 2002. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Naderi, M. M. Attar, and M. H. Moayed, “EIS examination of mill scale on mild steel with polyester-epoxy powder coating,” Progress in Organic Coatings, vol. 50, no. 3, pp. 162–165, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. R. Mafi, S. M. Mirabedini, R. Naderi, and M. M. Attar, “Effect of curing characterization on the corrosion performance of polyester and polyester/epoxy powder coatings,” Corrosion Science, vol. 50, no. 12, pp. 3280–3286, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. G. Wuzella, A. Kandelbauer, A. R. Mahendran, and A. Teischinger, “Thermochemical and isoconversional kinetic analysis of a polyester-epoxy hybrid powder coating resin for wood based panel finishing,” Progress in Organic Coatings, vol. 70, no. 4, pp. 186–191, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Barletta and A. Gisario, “An application of neural network solutions to laser assisted paint stripping process of hybrid epoxy-polyester coatings on aluminum substrates,” Surface and Coatings Technology, vol. 200, no. 24, pp. 6678–6689, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. R. Naderi, M. M. Attar, and M. H. Moayed, “EIS examination of mill scale on mild steel with polyester-epoxy powder coating,” Progress in Organic Coatings, vol. 50, no. 3, pp. 162–165, 2004. View at Publisher · View at Google Scholar · View at Scopus