Table of Contents
ISRN Mechanical Engineering
Volume 2013, Article ID 490750, 6 pages
http://dx.doi.org/10.1155/2013/490750
Research Article

Plastic Constitutive Model and Analysis of Flow Stress of 40Cr Quenched and Tempered Steel

1School of Mechatronics Engineering, Henan University of Science and Technology, Luoyang 471003, China
2School of Mechanical and Precision Instrument Engineering, Xi An University of Technology, Xi An 710048, China

Received 6 June 2013; Accepted 10 July 2013

Academic Editors: A. Z. Sahin, A. Szekrenyes, and X. Yang

Copyright © 2013 Wang Xiao-qiang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. Quan, F. Cui, J. Yang, H. Xu, and Y. Xue, “Numerical simulation of involute spline shaft's cold-rolling forming based on ANSYS/LS-DYNA,” China Mechanical Engineering, vol. 19, no. 4, pp. 419–427, 2008. View at Google Scholar · View at Scopus
  2. L. Yan, Y. Mingshun, Y. Qilong, and Z. Jianming, “Study on the metal flowing of lead screw cold roll-beating forming,” Advanced Science Letters, vol. 4, no. 6-7, pp. 1918–1922, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. S. Lu and N. He, “Experimental investigation of the dynamic behavior of hardened steel in high strain rate and parameter fitting of constitutive equation,” China Mechanical Engineering, vol. 19, no. 19, pp. 2382–2385, 2008. View at Google Scholar · View at Scopus
  4. W.-P. Bao, X.-P. Ren, and Y. Zhang, “The characteristics of flow stress and dynamic constitutive model at high strain rates for pure iron,” Journal of Plasticity Engineering, vol. 16, no. 5, pp. 125–129, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. A. S. Khan, M. Baig, S.-H. Choi, H.-S. Yang, and X. Sun, “Quasi-static and dynamic responses of advanced high strength steels: experiments and modeling,” International Journal of Plasticity, vol. 30-31, pp. 1–17, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. A. S. Khan, Y. S. Suh, and R. Kazmi, “Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys,” International Journal of Plasticity, vol. 20, no. 12, pp. 2233–2248, 2004. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Segurado, R. A. Lebensohn, J. Llorca, and C. N. Tomé, “Multiscale modeling of plasticity based on embedding the viscoplastic self-consistent formulation in implicit finite elements,” International Journal of Plasticity, vol. 28, no. 1, pp. 124–140, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. G. Z. Voyiadjis and F. H. Abed, “A coupled temperature and strain rate dependent yield function for dynamic deformations of bcc metals,” International Journal of Plasticity, vol. 22, no. 8, pp. 1398–1431, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. W. G. Guo, X. Q. Zhang, J. Su, Y. Su, Z. Y. Zeng, and X. J. Shao, “The characteristics of plastic flow and a physically-based model for 3003 Al-Mn alloy upon a wide range of strain rates and temperatures,” European Journal of Mechanics, A/Solids, vol. 30, no. 1, pp. 54–62, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Li, H.-B. Zhang, X.-Y. Ruan, Z.-H. Luo, and Y. Zhang, “Analysis and modeling of flow stress of 40Cr steel,” Cailiao Gongcheng/Journal of Materials Engineering, no. 11, pp. 41–49, 2004. View at Google Scholar · View at Scopus
  11. M. A. Kariem, J. H. Beynon, and D. Ruan, “Misalignment effect in the split Hopkinson pressure bar technique,” International Journal of Impact Engineering, vol. 47, pp. 60–70, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. G. R. Johnson and W. H. Cook, “A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures,” in Proceedings of the 7th International Symposium on Ballistic, p. 541, The Hague, The Netherlands, 1983.