Table of Contents
ISRN Mechanical Engineering
Volume 2013 (2013), Article ID 521375, 12 pages
http://dx.doi.org/10.1155/2013/521375
Research Article

Modeling of Homogeneous Mixture Formation and Combustion in GDI Engine with Negative Valve Overlap

Department of Mechanical Engineering, Amrita Vishwa Vidyapeetham, Coimbatore 641112, India

Received 31 July 2013; Accepted 27 August 2013

Academic Editors: F. Liu and Z. Yu

Copyright © 2013 M. K. Lalith et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Yao, Z. Zheng, and H. Liu, “Progress and recent trends in homogeneous charge compression ignition (HCCI) engines,” Progress in Energy and Combustion Science, vol. 35, no. 5, pp. 398–437, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. C. V. Naik, W. J. Pitz, C. K. Westbrook, M. Sjoberg, J. E. Dec, and J. Orme, “Detailed chemical kinetic modeling of surrogate fuels for gasoline and application toan HCCI engine,” SAE Paper 2005-01-3741, 2005. View at Google Scholar
  3. H. M. Xu, H. Fu, H. Williams, and I. Shilling, “Modelling study of combustion and Gas exchange in a HCCI (CAI) engine,” SAE Paper 2002-01-0114, 2002. View at Google Scholar
  4. N. P. Komninos, D. T. Hountalas, and D. A. Kouremenos, “Description of in-cylinder combustion processes in HCCI engines using a multi-zone model,” SAE Paper 2005-01-0171, 2005. View at Google Scholar
  5. H. M. Xu, A. Williams, H. Y. Fu, S. Wallace, S. Richardson, and M. Richardson, “Operating characteristics of a homogeneous charge compression ignition engine with cam profile switching-simulation study,” SAE Paper 2003-01-1859, 2003. View at Google Scholar
  6. R. Ogink, “Applications and results of a user-defined, detailed-chemistry HCCI combustion model in the AVL BOOST cycle simulation code,” in Proceedings of the International AVL User Meeting, pp. 14–15, Graz, Austria, 2003.
  7. N. Milovanovic, R. Dowden, R. Chen, and J. W. G. Turner, “Influence of the variable valve timing strategy on the control of a homogeneous charge compression (HCCI) engine,” SAE Paper 2004-01-1899, 2004. View at Google Scholar
  8. S. M. Aceves, D. L. Flowers, C. K. Westbrook, J. R. Smith, W. J. Pitz, and R. W. Dibble, “A multi-zone model for prediction of HCCI combustion and emissions,” SAE Paper 2000-01-0327, 2000. View at Google Scholar
  9. S. M. Aceves, J. Martinez-Frias, D. L. Flowers, J. R. Smith, R. W. Dibble, and J. F. Wright, “A decoupled model of detailed fluid mechanism followed by detailed chemical kinetics for prediction of iso-octane HCCI combustion,” SAE Paper 2001-01-3612, 2001. View at Google Scholar
  10. S. M. Aceves, D. L. Flowers, C. K. Westbrook, J. R. Smith, and W. J. Pitz, “Cylinder-geometry effect on HCCI combustion by multi-zone analysis,” SAE Paper 2002-01-2869, 2002. View at Google Scholar
  11. O. Roy and G. Valeri, “Gasoline HCCI modelling: an engine cycle simulation code with a multi-zone combustion model,” SAE Paper 2002-01-1745, 2002. View at Google Scholar
  12. S. C. Kong, C. D. Marriot, R. D. Reitz, and M. Christensen, “Modelling and experiments of HCCI engine combustion using detailed chemical kinetics with multidimensional CFD,” SAE Paper 2001-01-1026, 2001. View at Google Scholar
  13. S. C. Kong, C. D. Marriott, C. J. Rutland, and R. D. Reitz, “Experiments and CFD modelling of direct injection gasoline HCCI engine combustion,” SAE Paper 2002-01-1925, 2002. View at Google Scholar
  14. S. C. Kong, R. D. Reitz, M. Christensen, and B. Johansson, “Modelling the effects of geometry-generated turbulence on HCCI engine combustion,” SAE Paper 2003-01-1088, 2003. View at Google Scholar
  15. S. C. Kong, C. D. Marriott, C. J. Rutland, and R. D. Reitz, “Experiments and CFD modelling of direct injection gasoline HCCI engine combustion,” SAE Paper 2002-01-1925, 2002. View at Google Scholar
  16. S. C. Kong and R. D. Reitz, “Modelling the effects of geometry generated turbulence on HCCI engine combustion,” SAE Paper 2003-01-1088, 2003. View at Google Scholar
  17. G. Kontarakis, N. Collings, and T. Ma, “Demonstration of HCCI using a single cylinder four-stroke SI engine with modified valve timing,” SAE Paper 2000-01-2870, 2000. View at Google Scholar
  18. G. Tian, Z. Wang, J. Wang, S. Shuai, and X. An, “HCCI combustion control by injection strategy with negative valve overlap in a GDI engine,” SAE Paper 2006-01-0415, 2006. View at Google Scholar
  19. Y. Li, H. Zhao, N. Brouzos, and T. Ma, “Effect of injection timing on mixture and CAI combustion in a GDI engine with an air-assisted injector,” SAE Paper 2006-01-0206, 2006. View at Google Scholar
  20. “CONVERGE 2.1.0 theory manual,” March 2013.
  21. W. C. Reynolds, “The element potential for chemical equilibrium analysis: implementation in the interactive program STAJAN,” Tech. Rep. A3391, Stanford University, Stanford, Calif, USA, 1986. View at Google Scholar
  22. M. Mehl, W. J. Pitz, C. K. Westbrook, and H. J. Curran, “Kinetic modelling of gasoline surrogate components and mixtures under engine conditions,” Proceedings of the Combustion Institute, vol. 33, no. 1, pp. 193–200, 2011. View at Publisher · View at Google Scholar