Table of Contents
ISRN Biomaterials
Volume 2013 (2013), Article ID 545791, 6 pages
http://dx.doi.org/10.5402/2013/545791
Research Article

Micro-Pop-In Issues in Nanoscale Contact Deformation Resistance of Tooth Enamel

1Mechanical Property Evaluation Section, CSIR-Central Glass and Ceramic Research Institute, Kolkata 700 032, India
2Thermal Systems Group, ISRO Satellite Centre, Vimanapura, Bangalore 560 017, India

Received 14 August 2012; Accepted 6 September 2012

Academic Editors: J.-Y. Cognard and N. Dunne

Copyright © 2013 Nilormi Biswas et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Y. Chen, A. Y. M. Lin, Y. S. Lin et al., “Structure and mechanical properties of selected biological materials,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 1, no. 3, pp. 208–226, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. M. A. Meyers, P. Y. Chen, A. Y. M. Lin, and Y. Seki, “Biological materials: structure and mechanical properties,” Progress in Materials Science, vol. 53, no. 1, pp. 1–206, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. G. M. Luz and J. F. Mano, “Mineralized structures in nature: examples and inspirations for the design of new composite materials and biomaterials,” Composites Science and Technology, vol. 70, no. 13, pp. 1777–1788, 2010. View at Publisher · View at Google Scholar · View at Scopus
  4. S. Marwan, A. Haiak, A. Trinkle, D. Garcia, and F. Yang, “Investigation of nanomechanical and tribological properties of dental materials,” International Journal of Theoretical and Applied Multiscale Mechanics, vol. 1, no. 1, pp. 1–15, 2009. View at Google Scholar
  5. S. F. Ang, E. L. Bortel, M. V. Swain, A. Klocke, and G. A. Schneider, “Size-dependent elastic/inelastic behavior of enamel over millimeter and nanometer length scales,” Biomaterials, vol. 31, no. 7, pp. 1955–1963, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. F. Lippert, D. M. Parker, and K. D. Jandt, “Susceptibility of deciduous and permanent enamel to dietary acid-induced erosion studied with atomic force microscopy nanoindentation,” European Journal of Oral Sciences, vol. 112, no. 1, pp. 61–66, 2004. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Ge, F. Z. Cui, X. M. Wang, and H. L. Feng, “Property variations in the prism and the organic sheath within enamel by nanoindentation,” Biomaterials, vol. 26, no. 16, pp. 3333–3339, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. J. L. Cuy, A. B. Mann, K. J. Livi, M. F. Teaford, and T. P. Weihs, “Nanoindentation mapping of the mechanical properties of human molar tooth enamel,” Archives of Oral Biology, vol. 47, no. 4, pp. 281–291, 2002. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Poolthong, M. V. Swain, and T. Mori, “Mechanical properties of tooth following different storage conditions,” Journal of Dental Materials, vol. 77, no. 5, pp. 1120–1136, 1998. View at Google Scholar
  10. S. Park, D. H. Wang, D. Zhang, E. Romberg, and D. Arola, “Mechanical properties of human enamel as a function of age and location in the tooth,” Journal of Materials Science, vol. 19, no. 6, pp. 2317–2324, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Zhou and L. L. Hsiung, “Depth-dependent mechanical properties of enamel by nanoindentation,” Journal of Biomedical Materials Research Part A, vol. 81, no. 1, pp. 66–74, 2007. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Zamiri and S. De, “Mechanical properties of hydroxyapatite single crystals from nanoindentation data,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 4, no. 2, pp. 146–152, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. W. C. Oliver and G. M. Pharr, “Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments,” Journal of Materials Research, vol. 7, no. 6, pp. 1564–1580, 1992. View at Google Scholar · View at Scopus
  14. A. Dey, R. Chakraborty, and A. K. Mukhopadhyay, “Nanoindentation of soda Lime-Silica glass: effect of loading rate,” International Journal of Applied Glass Science, vol. 2, no. 2, pp. 144–155, 2011. View at Google Scholar
  15. C. A. Schuh, T. G. Nieh, and Y. Kawamura, “Rate dependence of serrated flow during nanoindentation of a bulk metallic glass,” Journal of Materials Research, vol. 17, no. 7, pp. 1651–1654, 2002. View at Google Scholar · View at Scopus
  16. Y. I. Golovin, V. I. Ivolgin, V. A. Khonik, K. Kitagawa, and A. I. Tyurin, “Serrated plastic flow during nanoindentation of a bulk metallic glass,” Scripta Materialia, vol. 45, no. 8, pp. 947–952, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. C. A. Schuh and T. G. Nieh, “A nanoindentation study of serrated flow in bulk metallic glasses,” Acta Materialia, vol. 51, no. 1, pp. 87–99, 2003. View at Publisher · View at Google Scholar · View at Scopus
  18. R. Nowak, T. Sekino, and K. Niihara, “Surface deformation of sapphire crystal,” Philosophical Magazine A, vol. 74, no. 1, pp. 171–194, 1996. View at Google Scholar · View at Scopus
  19. J. E. Bradby, S. O. Kucheyev, J. S. Williams et al., “Indentation-induced damage in GaN epilayers,” Applied Physics Letters, vol. 80, no. 3, pp. 383–385, 2002. View at Publisher · View at Google Scholar · View at Scopus
  20. S. O. Kucheyev, J. E. Bradby, J. S. Williams, C. Jagadish, and M. V. Swain, “Mechanical deformation of single-crystal ZnO,” Applied Physics Letters, vol. 80, no. 6, pp. 956–958, 2002. View at Publisher · View at Google Scholar · View at Scopus
  21. R. Chakraborty, A. Dey, and A. K. Mukhopadhyay, “Loading rate effect on nanohardness of soda-lime-silica glass,” Metallurgical and Materials Transactions A, vol. 41, no. 5, pp. 1301–1312, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. A. Dey, R. Chakraborty, and A. K. Mukhopadhyay, “Enhancement in nanohardness of soda-lime-silica glass,” Journal of Non-Crystalline Solids, vol. 357, no. 15, pp. 2934–2940, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Bhattacharya, R. Chakraborty, A. Dey, A. K. Mukhopadhyay, and S. K. Biswas, “Effect of loading rate on nano-mechanical properties of Alumina,” in Proceedings of the 3rd Workshop on Mechanical Behaviour of Systems at Small Length Scales, p. 40, Trivandrum, India, September 2011.
  24. S. Bhuniya, R. Chakraborty, A. Dey et al., “Effect of loading rate on microhardness of Alumina ceramics,” in Proceedings of the International Conferenceon High Pressure Science and Technology (AIRAPT '11), p. 188, BARC, Mumbai, India, 2011.
  25. C. E. Packard and C. A. Schuh, “Initiation of shear bands near a stress concentration in metallic glass,” Acta Materialia, vol. 55, no. 16, pp. 5348–5358, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. H. Shang, T. Rouxel, M. Buckley, and C. Bernard, “Viscoelastic behavior of a soda-lime-silica glass in the 293-833 K range by micro-indentation,” Journal of Materials Research, vol. 21, no. 3, pp. 632–638, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. W. G. Mao, Y. G. Shen, and C. Lu, “Deformation behavior and mechanical properties of polycrystalline and single crystal alumina during nanoindentation,” Scripta Materialia, vol. 65, no. 2, pp. 127–130, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. W. G. Mao, Y. G. Shen, and C. Lu, “Nanoscale elastic-plastic deformation and stress distributions of the C plane of sapphire single crystal during nanoindentation,” Journal of the European Ceramic Society, vol. 31, no. 10, pp. 1865–1871, 2011. View at Publisher · View at Google Scholar · View at Scopus
  29. T. Ebisu and S. Horibe, “Analysis of the indentation size effect in brittle materials from nanoindentation load-displacement curve,” Journal of the European Ceramic Society, vol. 30, no. 12, pp. 2419–2426, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Bhattacharya, R. Chakraborty, A. Dey, A. K. Mandal, and A. K. Mukhopadhyay, “Improvement in nanoscale contact resistance of Alumina,” Applied Physics A, vol. 107, no. 4, pp. 783–788, 2012. View at Google Scholar
  31. H. Gao, B. Ji, I. L. Jäger, E. Arzt, and P. Fratzl, “Materials become insensitive to flaws at nanoscale: lessons from nature,” Proceedings of the National Academy of Sciences of the United States of America, vol. 100, no. 10, pp. 5597–5600, 2003. View at Publisher · View at Google Scholar · View at Scopus