Table of Contents
ISRN Mechanical Engineering
Volume 2013 (2013), Article ID 645232, 13 pages
http://dx.doi.org/10.1155/2013/645232
Research Article

Vibroacoustical Analysis of Multiple-Layered Structures with Viscoelastic Damping Cores

Michigan Technological University, Houghton, MI 49931, USA

Received 2 December 2012; Accepted 16 December 2012

Academic Editors: M. Ahmadian, R. Brighenti, S. W. Chang, J. Clayton, P. Dineva, and G.-J. Wang

Copyright © 2013 Fei Lin and Mohan D. Rao. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. E. M. Kerwin, “Damping of flexural waves by a constrained visco-elastic layer,” Journal of the Acoustical Society of America, vol. 31, pp. 952–962, 1959. View at Google Scholar
  2. D. Ross, E. E. Ungar, and E. M. Kerwin, “Damping of plate flexural vibration by means of viscoelastic laminae,” in Structural Damping-a Colloquium on Structural Damping Held at the ASME Annual Meeting, pp. 49–87, 1959.
  3. R. A. Ditaranto, “Thery of vibratory bending for elastic and viscoelastic layered finite-length beams,” Journal of Applied Mechanics, vol. 32, pp. 881–886, 1965. View at Google Scholar
  4. D. J. Mead and S. Markus, “The forced vibration of a three-layer, damped sandwich beam with arbitrary boundary conditions,” Journal of Sound and Vibration, vol. 10, no. 2, pp. 163–175, 1969. View at Google Scholar · View at Scopus
  5. D. K. Rao, “Frequency and loss factors of sandwich beams under various boundary conditions,” Journal of Mechanical Engineering Science, vol. 20, no. 2, pp. 271–282, 1978. View at Google Scholar
  6. E. T. Cottle, Damping of layered beams with mixed boundary conditions [M.S. thesis], Air Force Institute of Technology, 1990.
  7. M. Falugi, “Analysis of a five-layer, viscoelastic, constrained-layer beam,” in Proceedings of the Damping Workshop Paper CCB, 1991.
  8. M. Parin, L. C. Rogers, and M. Falugi, “Practical stand off damping treatment for sheet metal,” in Proceedings of the Damping Workshop Paper IBA, 1989.
  9. L. C. Rogers and M. Parin, “Experimental results for stand-off passive vibration damping treatment,” in Proceedings of the Smart Structures and Materials 1995: Passive Damping, pp. 374–383, March 1995. View at Scopus
  10. J. M. Yellin, I. Y. Shen, P. G. Reinhall, and P. Y. H. Huang, “Experimental investigation of a passive stand-off layer damping treatment applied to an Euler-Bernoulli beam,” in Proceedings of the 1999 Smart Structures and Materials—Passive Damping and Isolation, vol. 3672 of Proceedings of SPIE, pp. 228–233, March 1999. View at Scopus
  11. J. M. Yellin, I. Y. Shen, P. G. Reinhall, and P. Y. H. Huang, “An analytical and experimental analysis for a one-dimensional passive stand-off layer damping treatment,” Journal of Vibration and Acoustics, vol. 122, no. 4, pp. 440–447, 2000. View at Google Scholar · View at Scopus
  12. J. M. Yellin and I. Y. Shen, “An analytical model for a passive stand-off layer damping treatment applied to an Euler-Bernoulli beam,” in Smart Structures and Materials 2002: Damping and Isolation, Proceedings of SPIE, pp. 349–357, June 1998. View at Publisher · View at Google Scholar · View at Scopus
  13. B. Yang and C. A. Tan, “The transfer functions of one dimensional distributed parameter systems,” Journal of Applied Mechanics, vol. 116, pp. 341–349, 1959. View at Google Scholar
  14. Q. Chen and Y. W. Chan, “Integral finite element method for dynamical analysis of elastic-viscoelastic composite structures,” Computers and Structures, vol. 74, no. 1, pp. 51–64, 2000. View at Publisher · View at Google Scholar · View at Scopus
  15. G. A. Lesieutre and U. Lee, “A finite element for beams having segmented active constrained layers with frequency-dependent viscoelastics,” Smart Materials and Structures, vol. 5, no. 5, pp. 615–627, 1996. View at Publisher · View at Google Scholar · View at Scopus
  16. S. W. Kung and R. Singh, “Vibration analysis of beams with multiple constrained layer damping patches,” Journal of Sound and Vibration, vol. 212, no. 5, pp. 781–805, 1998. View at Google Scholar · View at Scopus
  17. Q. J. Zhang and M. G. Sainsbury, “The Galerkin element method applied to the vibration of rectangular damped sandwich plates,” Computers and Structures, vol. 74, no. 6, pp. 717–730, 2000. View at Publisher · View at Google Scholar · View at Scopus
  18. R. L. Bagley and P. J. Torvik, “Fractional calculus-a different approach to the analysis of viscoelastically damped structures,” AIAA Journal, vol. 21, no. 5, pp. 741–748, 1983. View at Google Scholar · View at Scopus
  19. M. Hao, Vibration analysis of constrained layered beams with multiple damping layers [Ph.D. thesis], Michigan Tech, 2005.
  20. G. A. Lesieutre, E. Bianchini, and A. Maiani, “Finite element modeling of one-dimensional viscoelastic structures using anelastic displacement fields,” Journal of Guidance, Control, and Dynamics, vol. 19, no. 3, pp. 520–527, 1996. View at Google Scholar · View at Scopus
  21. M. A. Biot, “Variational principles in irreversible thermodynamics with application to viscoelasticity,” Physical Review, vol. 97, no. 6, pp. 1463–1469, 1955. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Zhang and G. T. Zheng, “The Biot model and its application in viscoelastic composite structures,” Journal of Vibration and Acoustics, vol. 129, no. 5, pp. 533–540, 2007. View at Publisher · View at Google Scholar · View at Scopus
  23. D. J. McTavish, “Shock response of a damped linear structure using GHM finite elements,” in Proceedings of the 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, pp. 1681–1689, April 2003, Paper 1591. View at Scopus
  24. L. Zhang, H. P. Du, Y. M. Shi, and X. Z. Shi, “Parametric determination for GHM of ZN-1 viscoelastic material,” Rare Metal Materials and Engineering, vol. 31, no. 2, pp. 91–95, 2002. View at Google Scholar · View at Scopus
  25. C. H. Park, D. J. Inman, and M. J. Lam, “Model reduction of viscoelastic finite element models,” Journal of Sound and Vibration, vol. 219, no. 4, pp. 619–637, 1999. View at Google Scholar · View at Scopus
  26. M. Hao and M. D. Rao, “Vibration and damping analysis of a sandwich beam containing a viscoelastic constraining layer,” Journal of Composite Materials, vol. 39, no. 18, pp. 1621–1643, 2005. View at Publisher · View at Google Scholar · View at Scopus
  27. D. H. Lee, “Optimal placement of constrained-layer damping for reduction of interior noise,” AIAA Journal, vol. 46, no. 1, pp. 75–83, 2008. View at Publisher · View at Google Scholar · View at Scopus
  28. F. Lin and M. D. Rao, “Vibration analysis of a multiple-layered viscoelastic structure using the biot damping model,” AIAA Journal, vol. 48, no. 3, pp. 624–634, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. T. W. Wu, Boundary Element Acoustics: Fundamentals and Computer Codes, WIT Press, Ashurst, UK, 2000.