Table of Contents
ISRN Biomaterials
Volume 2013 (2013), Article ID 783873, 9 pages
http://dx.doi.org/10.5402/2013/783873
Research Article

Relative Contributions of Surface Roughness and Crystalline Structure to the Biocompatibility of Titanium Nitride and Titanium Oxide Coatings Deposited by PVD and TPS Coatings

1Department of Oral Implantology, Faculty of Dentistry, Istanbul University, Capa, P.O. Box 34093, Istanbul, Turkey
2Department of Histology and Embryology, Faculty of Medicine, Istanbul University, Capa, P.O. Box 34390, Istanbul, Turkey
3Department of Metallurgical and Materials Engineering, Faculty of Chemical and Metallurgical Engineering, Istanbul Technical University, Maslak, P.O. Box 34469, Istanbul, Turkey
4Department of Geological Engineering, Faculty of Engineering, Istanbul University, Avcilar, P.O. Box 34320, Istanbul, Turkey

Received 25 March 2013; Accepted 19 May 2013

Academic Editors: B. F. Ali, K. Y. Choi, J. Langer, L. G. Lopes, and J. Svorec

Copyright © 2013 Sinem Yeniyol et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Bruinink and E. Wintermantel, “Grooves affect primary bone marrow but not osteoblastic MC3T3-E1 cell cultures,” Biomaterials, vol. 22, no. 18, pp. 2465–2473, 2001. View at Publisher · View at Google Scholar · View at Scopus
  2. H. J. Rønold and J. E. Ellingsen, “Effect of micro-roughness produced by TiO2 blasting-tensile testing of bone attachment by using coin-shaped implants,” Biomaterials, vol. 23, no. 21, pp. 4211–4219, 2002. View at Publisher · View at Google Scholar · View at Scopus
  3. R. Lange, F. Lüthen, U. Beck, J. Rychly, A. Baumann, and B. Nebe, “Cell-extracellular matrix interaction and physico-chemical characteristics of titanium surfaces depend on the roughness of the material,” Biomolecular Engineering, vol. 19, no. 2–6, pp. 255–261, 2002. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Anselme, “Review: osteoblast adhesion on biomaterials,” Biomaterials, vol. 21, no. 7, pp. 667–681, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. K. Anselme and M. Bigerelle, “Topography effects of pure titanium substrates on human osteoblast long-term adhesion,” Acta Biomaterialia, vol. 1, no. 2, pp. 211–222, 2005. View at Publisher · View at Google Scholar · View at Scopus
  6. L. F. Cooper, T. Masuda, S. W. Whitson, P. Yliheikkilä, and D. A. Felton, “Formation of mineralizing osteoblast cultures on machined, titanium oxide grit-blasted, and plasma-sprayed titanium surfaces,” International Journal of Oral and Maxillofacial Implants, vol. 14, no. 1, pp. 37–47, 1999. View at Google Scholar · View at Scopus
  7. E. Eisenbarth, P. Linez, V. Biehl, D. Velten, J. Breme, and H. F. Hildebrand, “Cell orientation and cytoskeleton organisation on ground titanium surfaces,” Biomolecular Engineering, vol. 19, no. 2–6, pp. 233–237, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. A. Scarano, M. Piattelli, G. Vrespa, G. Petrone, G. Iezzi, and A. Piattelli, “Bone healing around titanium and titanium nitride-coated dental implants with three surfaces: an experimental study in rats,” Clinical Implant Dentistry and Related Research, vol. 5, no. 2, pp. 103–111, 2003. View at Google Scholar · View at Scopus
  9. Y. Sugita, K. Ishizaki, F. Iwasa et al., “Effects of pico-to-nanometer-thin TiO2 coating on the biological properties of microroughened titanium,” Biomaterials, vol. 32, no. 33, pp. 8374–8384, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Harle, H. Kim, N. Mordan, J. C. Knowles, and V. Salih, “Initial responses of human osteoblasts to sol-gel modified titanium with hydroxyapatite and titania composition,” Acta Biomaterialia, vol. 2, no. 5, pp. 547–556, 2006. View at Publisher · View at Google Scholar · View at Scopus
  11. S. Rossi, T. Tirri, H. Paldan, H. Kuntsi-Vaattovaara, R. Tulamo, and T. Närhi, “Peri-implant tissue response to TiO2 surface modified implants,” Clinical Oral Implants Research, vol. 19, no. 4, pp. 348–355, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Annunziata, L. Guida, L. Perillo, R. Aversa, I. Passaro, and A. Oliva, “Biological response of human bone marrow stromal cells to sandblasted titanium nitride-coated implant surfaces,” Journal of Materials Science, vol. 19, no. 12, pp. 3585–3591, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. J. A. Hendry and R. M. Pilliar, “The fretting corrosion resistance of PVD surface-modified orthopedic implant alloys,” Journal of Biomedical Materials Research, vol. 58, no. 2, pp. 156–166, 2001. View at Google Scholar
  14. J. Bolton and X. Hu, “In vitro corrosion testing of PVD coatings applied to a surgical grade Co-Cr-Mo alloy,” Journal of Materials Science, vol. 13, no. 6, pp. 567–574, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Zhao, X. M. Cai, H. Q. Tang, T. Liu, H. Q. Gu, and R. Z. Cui, “Bactericidal and biocompatible properties of TiN/Ag multilayered films by ion beam assisted deposition,” Journal of Materials Science, vol. 20, supplement 1, pp. S101–S105, 2009. View at Publisher · View at Google Scholar · View at Scopus
  16. I. Dion, C. Baquey, B. Candelon, and J. R. Monties, “Hemocompatibility of titanium nitride,” International Journal of Artificial Organs, vol. 15, no. 10, pp. 617–621, 1992. View at Google Scholar · View at Scopus
  17. I. Dion, X. Roques, N. More et al., “Ex vivo leucocyte adhesion and protein adsorption on TiN,” Biomaterials, vol. 14, no. 9, pp. 712–719, 1993. View at Publisher · View at Google Scholar · View at Scopus
  18. I. Dion, F. Rouais, L. Trut, C. Baquey, J. R. Monties, and P. Havlik, “TiN coating: surface characterization and haemocompatibility,” Biomaterials, vol. 14, no. 3, pp. 169–176, 1993. View at Publisher · View at Google Scholar · View at Scopus
  19. A. Wisbey, P. J. Gregson, and M. Tuke, “Application of PVD TiN coating to Co-Cr-Mo based surgical implants,” Biomaterials, vol. 8, no. 6, pp. 477–480, 1987. View at Google Scholar · View at Scopus
  20. P. R. Mezger and N. H. J. Creugers, “Titanium nitride coatings in clinical dentistry,” Journal of Dentistry, vol. 20, no. 6, pp. 342–344, 1992. View at Google Scholar · View at Scopus
  21. C. D. Peterson, B. M. Hillberry, and D. A. Heck, “Component wear of total knee prostheses using Ti-6Al-4V, titanium nitride coated Ti-6Al-4V, and cobalt-chromium-molybdenum femoral components,” Journal of Biomedical Materials Research, vol. 22, no. 10, pp. 887–903, 1988. View at Google Scholar · View at Scopus
  22. M. I. Jones, I. R. McColl, D. M. Grant, K. G. Parker, and T. L. Parker, “Protein adsorption and platelet attachment and activation, on TiN, TiC, and DLC coatings on titanium for cardiovascular applications,” Journal of Biomedical Materials Research, vol. 52, no. 2, pp. 413–421, 2000. View at Google Scholar
  23. E. Y. Gutmanas and I. Gotman, “PIRAC Ti nitride coated Ti-6AI-4V head against UHMWPE acetabular cup-hip wear simulator study,” Journal of Materials Science, vol. 15, no. 4, pp. 327–330, 2004. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Areva, V. Aäritalo, S. Tuusa, M. Jokinen, M. Lindén, and T. Peltola, “Sol-Gel-derived TiO2–SiO2 implant coatings for direct tissue attachment, part II: evaluation of cell response,” Journal of Materials Science, vol. 18, no. 8, pp. 1633–1642, 2007. View at Publisher · View at Google Scholar · View at Scopus
  25. H. Kim, H. Kim, V. Salih, and J. C. Knowles, “Hydroxyapatite and titania sol-gel composite coatings on titanium for hard tissue implants; mechanical and in vitro biological performance,” Journal of Biomedical Materials Research B, vol. 72, no. 1, pp. 1–8, 2005. View at Publisher · View at Google Scholar · View at Scopus
  26. S. Lee, H. Kim, E. Lee, L. Li, and H. Kim, “Hydroxyapatite-TiO2 hybrid coating on Ti implants,” Journal of Biomaterials Applications, vol. 20, no. 3, pp. 195–208, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. S. Areva, H. Paldan, T. Peltola, T. Närhi, M. Jokinen, and M. Lindén, “Use of sol-gel-derived titania coating for direct soft tissue attachment,” Journal of Biomedical Materials Research A, vol. 70, no. 2, pp. 169–178, 2004. View at Google Scholar · View at Scopus
  28. V. V. Meretoja, S. Rossi, T. Peltola, L. J. Pelliniemi, and T. O. Närhi, “Adhesion and proliferation of human fibroblasts on sol-gel coated titania,” Journal of Biomedical Materials Research A, vol. 95, no. 1, pp. 269–275, 2010. View at Publisher · View at Google Scholar · View at Scopus
  29. A. Wennerberg, V. Fröjd, M. Olsson et al., “Nanoporous TiO2 thin film on titanium oral implants for enhanced human soft tissue adhesion: a light and electron microscopy study,” Clinical Implant Dentistry and Related Research, vol. 13, no. 3, pp. 184–196, 2011. View at Publisher · View at Google Scholar · View at Scopus
  30. B. Größner-Schreiber, M. Griepentrog, I. Haustein et al., “Plaque formation on surface modified dental implants—an in vitro study,” Clinical Oral Implants Research, vol. 12, no. 6, pp. 543–551, 2001. View at Google Scholar · View at Scopus
  31. K. Shieh, M. Li, Y. Lee, S. Sheu, Y. Liu, and Y. Wang, “Antibacterial performance of photocatalyst thin film fabricated by defection effect in visible light,” Nanomedicine, vol. 2, no. 2, pp. 121–126, 2006. View at Publisher · View at Google Scholar · View at Scopus
  32. M. Chatzinikolaidou, T. K. Lichtinger, R. T. Müller, and H. P. Jennissen, “Peri-implant reactivity and osteoinductive potential of immobilized rhBMP-2 on titanium carriers,” Acta Biomaterialia, vol. 6, no. 11, pp. 4405–4421, 2010. View at Publisher · View at Google Scholar · View at Scopus
  33. A. M. Ballo, D. Bjöörn, M. Astrand, A. Palmquist, J. Lausmaa, and P. Thomsen, “Bone response to physical vapour deposited titanium dioxide coatings on titanium implants,” Clinical Oral Implants Research, vol. 15, 2012. View at Publisher · View at Google Scholar
  34. D. M. Mattox, Handbook of Physical Vapor Deposition (PVD) Processing, Noyes, Park Ridge, NJ, USA, 1998.
  35. X. Liu, P. K. Chu, and C. Ding, “Surface modification of titanium, titanium alloys, and related materials for biomedical applications,” Materials Science and Engineering R, vol. 47, no. 3-4, pp. 49–121, 2004. View at Publisher · View at Google Scholar · View at Scopus
  36. V. Viswanathan, T. Laha, K. Balani, A. Agarwal, and S. Seal, “Challenges and advances in nanocomposite processing techniques,” Materials Science and Engineering R, vol. 54, no. 5-6, pp. 121–285, 2006. View at Publisher · View at Google Scholar · View at Scopus
  37. J. Yu, X. Zhao, and Q. Zhao, “Photocatalytic activity of nanometer TiO2 thin films prepared by the sol-gel method,” Materials Chemistry and Physics, vol. 69, no. 1–3, pp. 25–29, 2001. View at Publisher · View at Google Scholar · View at Scopus
  38. D. Byun, Y. Jin, B. Kim, J. Kee Lee, and D. Park, “Photocatalytic TiO2 deposition by chemical vapor deposition,” Journal of Hazardous Materials, vol. 73, no. 2, pp. 199–206, 2000. View at Publisher · View at Google Scholar · View at Scopus
  39. K. Wang, Y. Hsieh, P. Chao, and C. Cgang, “The photocatalytic degradation of trichloroethane by chemical vapor deposition method prepared titanium dioxide catalyst,” Journal of Hazardous Materials, vol. 95, no. 1-2, pp. 161–174, 2002. View at Publisher · View at Google Scholar · View at Scopus
  40. M. Kemell, V. Pore, M. Ritala, M. Leskelä, and M. Lindén, “Atomic layer deposition in nanometer-level replication of cellulosic substances and preparation of photocatalytic TiO2/cellulose composites,” Journal of the American Chemical Society, vol. 127, no. 41, pp. 14178–14179, 2005. View at Publisher · View at Google Scholar · View at Scopus
  41. S. Mändl, R. Sader, G. Thorwarth et al., “Investigation on plasma immersion ion implantation treated medical implants,” Biomolecular Engineering, vol. 19, no. 2–6, pp. 129–132, 2002. View at Publisher · View at Google Scholar · View at Scopus
  42. A. Bendavid, P. J. Martin, and H. Takikawa, “Deposition and modification of titanium dioxide thin films by filtered arc deposition,” Thin Solid Films, vol. 360, no. 1-2, pp. 241–249, 2000. View at Publisher · View at Google Scholar · View at Scopus
  43. H. Yumoto, S. Matsudo, and K. Akashi, “Photocatalytic decomposition of NO2 on TiO2 films prepared by arc ion plating,” Vacuum, vol. 65, no. 3-4, pp. 509–514, 2002. View at Publisher · View at Google Scholar · View at Scopus
  44. D. M. Brunette, P. Tengvall, M. Textor, and P. Thomsen, Titanium in Medicine, Springer, New York, NY, USA, 2001.
  45. S. A. Hacking, M. Zuraw, E. J. Harvey, M. Tanzer, J. J. Krygier, and J. D. Bobyn, “A physical vapor deposition method for controlled evaluation of biological response to biomaterial chemistry and topography,” Journal of Biomedical Materials Research A, vol. 82, no. 1, pp. 179–187, 2007. View at Publisher · View at Google Scholar · View at Scopus
  46. C.-S. Kim, S.-H. Sohn, S.-K. Jeon, K.-N. Kim, J.-J. Ryu, and M.-K. Kim, “Effect of various implant coatings on biological responses in MG63 using cDNA microarray,” Journal of Oral Rehabilitation, vol. 33, no. 5, pp. 368–379, 2006. View at Publisher · View at Google Scholar · View at Scopus
  47. B. Groessner-Schreiber, A. Neubert, W. Müller, M. Hopp, M. Griepentrog, and K. Lange, “Fibroblast growth on surface-modified dental implants: an in vitro study,” Journal of Biomedical Materials Research A, vol. 64, no. 4, pp. 591–599, 2003. View at Google Scholar · View at Scopus
  48. B. Größner-Schreiber, M. Herzog, J. Hedderich, A. Dück, M. Hannig, and M. Griepentrog, “Focal adhesion contact formation by fibroblasts cultured on surface-modified dental implants: an in vitro study,” Clinical Oral Implants Research, vol. 17, no. 6, pp. 736–745, 2006. View at Publisher · View at Google Scholar · View at Scopus
  49. W. C. Clem, V. V. Konovalov, S. Chowdhury, Y. K. Vohra, S. A. Catledge, and S. L. Bellis, “Mesenchymal stem cell adhesion and spreading on microwave plasma-nitrided titanium alloy,” Journal of Biomedical Materials Research A, vol. 76, no. 2, pp. 279–287, 2006. View at Publisher · View at Google Scholar · View at Scopus
  50. M. Manso-Silvan, J. M. Martínez-Duart, S. Ogueta, P. García-Ruiz, and J. Pérez-Rigueiro, “Development of human mesenchymal stem cells on DC sputtered titanium nitride thin films,” Journal of Materials Science, vol. 13, no. 3, pp. 289–293, 2002. View at Publisher · View at Google Scholar · View at Scopus