Table of Contents
ISRN Corrosion
Volume 2013 (2013), Article ID 846405, 7 pages
http://dx.doi.org/10.1155/2013/846405
Research Article

Copper Corrosion by Atmospheric Pollutants in the Electronics Industry

1Engineering Institute, Autonomous University of Baja California, Boulevard Benito Juarez y Calle a la Normal S/N, Colonia Insurgentes Este, 21280 Mexicali, BCN, Mexico
2Polytechnic University of Baja California, Calle de la Claridad S/N, Colonia Plutarco Elias Calles, 21376 Mexicali, BCN, Mexico
3National Center of Metallurgical Research, Avenue Gregorio del Amo 8, 28040 Madrid, Spain

Received 10 July 2013; Accepted 23 August 2013

Academic Editors: L. Bazzi, G. Bereket, and A. Hermann

Copyright © 2013 Benjamin Valdez Salas et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Valdez, M. Schorr, M. Quintero et al., “Corrosion and scaling at Cerro Prieto geothermal field,” Anti-Corrosion Methods and Materials, vol. 56, no. 1, pp. 28–34, 2009. View at Publisher · View at Google Scholar · View at Scopus
  2. L. Veleva, B. Valdez, G. Lopez, L. Vargas, and J. Flores, “Atmospheric corrosion of electro-electronics metals in urban desert simulated indoor environment,” Corrosion Engineering Science and Technology, vol. 43, no. 2, pp. 149–155, 2008. View at Publisher · View at Google Scholar · View at Scopus
  3. J. F. Flores and S. B. Valdez, “Cabina de simulación de corrosion para la industria electrónica en interior,” Ingenieros, vol. 6, no. 21, 2003 (Spanish). View at Google Scholar
  4. ASTM, “Standard practice for conducting atmospheric corrosion test on metals,” ASTM G50-76, ASTM, West Conshohocken, Pa, USA, 2003. View at Google Scholar
  5. G. Lopez, B. Valdez, and M. Schorr, “Spectroscopy analysis of corrosion in the electronics industry influenced by Santa Ana Winds in marine environments of Mexico,” in Indoor and Outdoor Air Pollution, INTECH, 2011. View at Google Scholar
  6. “Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres: determination and estimation attack in indoor atmospheres,” ISO 11844-1, ISO, Geneva, Switzerland, 2005.
  7. “Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres: determination and estimation of indoor corrosivity,” ISO 11844-2, ISO, Geneva, Switzerland, 2006.
  8. A. Moncmanova, Environmental Deterioration of Materials, WIT Press, 2007.
  9. L. B. Gustavo, Caracterización de la corrosión en materiales metálicos de la industria electrónica en Mexicali, B.C. [Tesis de doctorado], UABC, Instituto de Ingeniería, Mexicali, México, 2008.
  10. G. López, H. Tiznado, G. Soto, W. de la Cruz, B. Valdez, and R. M. Schorr Zlatev, “Corrosión de dispositivos electrónicos por contaminación atmosférica en interiores de plantas de ambientes áridos y marinos,” Revista Nova Scientia, vol. 3, no. 1, 2010. View at Google Scholar
  11. G. López, H. Tiznado, G. S. Herrera et al., “Use of AES in corrosion of copper connectors of electronic devices and equipments in arid and marine environments,” Anti-Corrosion Methods and Materials, vol. 58, no. 6, pp. 331–336, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Reid, J. Punch, C. Ryan et al., “Microstructural development of copper sulfide on copper exposed to humid H2S,” Journal of the Electrochemical Society, vol. 154, no. 4, pp. C209–C214, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. B. Valdez, M. Schorr, R. Zlatev et al., “Corrosion control in industry,” in Environment and Industrial Corrosion, Practical and Theoretical Aspects, INTECH, 2012. View at Google Scholar
  14. S. B. Valdez, W. M. Schorr, B. G. Lopez et al., “H2S pollution and its effect on corrosion of electronic components,” in Air Quality-New Perspective, INTECH, 2012. View at Google Scholar
  15. B. G. Lopez, S. B. Valdez, W. M. Schorr, and G. C. Navarro, “Microscopy and spectroscopy of MEMS used in the electronic industry of Baja California region Mexico,” in Air Quality-New Perspective, INTECH, 2012. View at Google Scholar
  16. B. G. Lopez, S. B. Valdez, K. R. Zlatev, P. J. Flores, B. M. Carrillo, and W. M. Schorr, “Corrosion of metals at indoor conditions in the electronics manufacturing industry,” Anti-Corrosion Methods and Materials, vol. 54, no. 6, pp. 354–359, 2007. View at Publisher · View at Google Scholar · View at Scopus
  17. J. Smith, Z. Qin, F. King, L. Werme, and D. W. Shoesmith, “Sulfide film formation on copper under electrochemical and natural corrosion conditions,” Corrosion, vol. 63, no. 2, pp. 135–144, 2007. View at Google Scholar · View at Scopus
  18. K. Demirkan, G. E. Derkits Jr., D. A. Fleming et al., “Corrosion of Cu under highly corrosive environments,” Journal of the Electrochemical Society, vol. 157, no. 1, pp. C30–C35, 2010. View at Publisher · View at Google Scholar · View at Scopus