Table of Contents
ISRN Industrial Engineering
Volume 2013, Article ID 869736, 10 pages
http://dx.doi.org/10.1155/2013/869736
Research Article

Modeling and Analysis of Injection Moulding Process Parameters for Plastic Gear Industry Application

1Department of Mould Technology, Kolej Kemahiran Tinggi MARA, Balik Pulau, Genting, 11000 Balik Pulau, Penang, Malaysia
2School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, 14300 Nibong Tebal, Penang, Malaysia

Received 18 April 2013; Accepted 8 May 2013

Academic Editors: A. Gomez and J. Wei

Copyright © 2013 Nik Mizamzul Mehat et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Nik Mizamzul Mehat, Shahrul Kamaruddin, and Abdul Rahim Othman, “Modeling and Analysis of Injection Moulding Process Parameters for Plastic Gear Industry Application,” ISRN Industrial Engineering, vol. 2013, Article ID 869736, 10 pages, 2013. https://doi.org/10.1155/2013/869736.