Research Article
Modeling and Analysis of Injection Moulding Process Parameters for Plastic Gear Industry Application
Table 5
The sequences of each quality characteristics after data preprocessing.
| | Volumetric Shrinkage (%) | Deflection (mm) |
| Reference sequence | 1.0000 | 1.0000 | Comparability sequences | | | Experiment no. 1 | 0.9879 | 0.6426 | Experiment no. 2 | 0.8488 | 0.8864 | Experiment no. 3 | 0.7661 | 0.9493 | Experiment no. 4 | 0.6089 | 0.7996 | Experiment no. 5 | 0.6331 | 0.9747 | Experiment no. 6 | 0.4536 | 0.2591 | Experiment no. 7 | 0.2036 | 0.0760 | Experiment no. 8 | 0.0000 | 0.6737 | Experiment no. 9 | 0.1734 | 0.8499 | Experiment no. 10 | 0.9214 | 1.0000 | Experiment no. 11 | 0.8065 | 0.6891 | Experiment no. 12 | 1.0000 | 0.8169 | Experiment no. 13 | 0.4516 | 0.9378 | Experiment no. 14 | 0.6028 | 0.3539 | Experiment no. 15 | 0.6512 | 0.8415 | Experiment no. 16 | 0.1895 | 0.7559 | Experiment no. 17 | 0.0000 | 0.8526 | Experiment no. 18 | 0.1633 | 0.0000 |
|
|