Table of Contents
ISRN Forestry
Volume 2013, Article ID 876939, 6 pages
http://dx.doi.org/10.1155/2013/876939
Review Article

Effect of Additives on Wood Pellet Physical and Thermal Characteristics: A Review

Faculty of Natural Resources Management, Lakehead University, 955 Oliver Road, Thunder Bay, ON, Canada P7B 5E1

Received 26 December 2012; Accepted 13 January 2013

Academic Editors: S. Sun and S. Yildiz

Copyright © 2013 Dmitry Tarasov et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [12 citations]

The following is the list of published articles that have cited the current article.

  • Sébastien Fournel, Joahnn Palacios, Stéphane Godbout, and Michèle Heitz, “Effect of Additives and Fuel Blending on Emissions and Ash-Related Problems from Small-Scale Combustion of Reed Canary Grass,” Agriculture, vol. 5, no. 3, pp. 561–576, 2015. View at Publisher · View at Google Scholar
  • Nevena Mišljenović, John Mosbye, Reidar Barfod Schüller, Odd-Ivar Lekang, and Carlos Salas-Bringas, “Physical quality and surface hydration properties of wood based pellets blended with waste vegetable oil,” Fuel Processing Technology, 2015. View at Publisher · View at Google Scholar
  • B. Lela, M. Barišić, and S. Nižetić, “Cardboard/sawdust briquettes as biomass fuel: Physical–mechanical and thermal characteristics,” Waste Management, 2015. View at Publisher · View at Google Scholar
  • Martin Englisch, Hans Hartmann, and Martin Kaltschmitt, “Mechanische Aufbereitung,” Energie aus Biomasse, pp. 417–491, 2016. View at Publisher · View at Google Scholar
  • Vijay Sundaram, and Kasiviswanathan Muthukumarappan, “Impact of AFEX™ Pretreatment and Extrusion Pelleting on Pellet Physical Properties and Sugar Recovery from Corn Stover, Prairie Cord Grass, and Switchgrass,” Applied Biochemistry and Biotechnology, 2016. View at Publisher · View at Google Scholar
  • Hangyong Ray Lu, and Ali El Hanandeh, “Assessment of bioenergy production from mid-rotation thinning of hardwood plantation: life cycle assessment and cost analysis,” Clean Technologies and Environmental Policy, 2017. View at Publisher · View at Google Scholar
  • Lu Ding, Kunio Yoshikawa, Minoru Fukuhara, Dai Xin, and Li Muhan, “Development of an ultra-small biomass gasification and power generation system: Part 1. A novel carbonization process and optimization of pelletization of carbonized wood char,” Fuel, vol. 210, pp. 674–683, 2017. View at Publisher · View at Google Scholar
  • Mohammad Ali Abdoli, Abooali Golzary, Ashkan Hosseini, Pourya Sadeghi, Mohammad Ali Abdoli, Abooali Golzary, Ashkan Hosseini, and Pourya Sadeghi, “Pellet Production Variables,” Wood Pellet as a Renewable Source of Energy, pp. 87–99, 2018. View at Publisher · View at Google Scholar
  • Andrzej Białowiec, Monika Micuda, and Jacek Koziel, “Waste to Carbon: Densification of Torrefied Refuse-Derived Fuel,” Energies, vol. 11, no. 11, pp. 3233, 2018. View at Publisher · View at Google Scholar
  • Manar Younis, Sabla Y. Alnouri, Belal J. Abu Tarboush, and Mohammad N. Ahmad, “Renewable biofuel production from biomass: a review for biomass pelletization, characterization, and thermal conversion techniques,” International Journal of Green Energy, pp. 1–27, 2018. View at Publisher · View at Google Scholar
  • Izabelle Rodrigues Ferreira, Rosimeire dos Santos, Renato Castro, Angélica de Cássia Oliveira Carneiro, Ana Flávia Castro, Cynthia Patricia de Sousa Santos, Sarah Esther de Lima Costa, and Krisnara Mairinck, “Sorghum (Sorghum bicolor) Pellet Production and Characterization,” Floresta e Ambiente, vol. 26, no. 3, 2019. View at Publisher · View at Google Scholar
  • Andrzej Białowiec, Monika Micuda, Antoni Szumny, Jacek Łyczko, and Jacek Koziel, “Waste to Carbon: Influence of Structural Modification on VOC Emission Kinetics from Stored Carbonized Refuse-Derived Fuel,” Sustainability, vol. 11, no. 3, pp. 935, 2019. View at Publisher · View at Google Scholar