Table of Contents
ISRN Chemical Engineering
Volume 2013 (2013), Article ID 952589, 5 pages
http://dx.doi.org/10.1155/2013/952589
Research Article

A Comparative Study of Recycling of Used Engine Oil Using Extraction by Composite Solvent, Single Solvent, and Acid Treatment Methods

1College of Chemical Engineering, Beijing University of Chemical Technology, Beijing 100029, China
2Department of Mechanical Engineering, Mehran University of Engineering and Technology, Jamshoro 76062, Pakistan
3Pakistan Council of Scientific and Industrial Research, Karachi 75280, Pakistan

Received 28 May 2013; Accepted 19 June 2013

Academic Editors: A. M. Seayad and F. Secundo

Copyright © 2013 Rashid Abro et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Shakirullah, I. Ahmad, M. Saeed et al., “Environmentally friendly recovery and characterization of oil from used engine lubricants,” Journal of the Chinese Chemical Society, vol. 53, no. 2, pp. 335–342, 2006. View at Google Scholar · View at Scopus
  2. J. L. A. Filho, L. G. M. Moura, and A. C. S. Ramos, “Liquid-liquid extraction and adsorption on solid surfaces applied to used lubricant oils recovery,” Brazilian Journal of Chemical Engineering, vol. 27, no. 4, pp. 687–697, 2010. View at Google Scholar · View at Scopus
  3. F. O. Cotton, “Waste lubricating oil: an annotated review,” REVISION DEB3001439 of Annotated Review 1997 BETC/IC 79/4, CORP; Source- Department of Energy, Bartlesville, Okla, USA, 1997. View at Google Scholar
  4. A. Hamad, E. Al-Zubaidy, and M. E. Fayed, “Used lubricating oil recycling using hydrocarbon solvents,” Journal of Environmental Management, vol. 74, no. 2, pp. 153–159, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. M. k. Jha, “Re-refining of used lube oils: an intelligent and eco-friendly option,” Indian Chemical Engineering, vol. 473, pp. 209–211, 2005. View at Google Scholar
  6. R. R. F. Kinghorn, An Introduction to the Physics and Chemistry of Petroleum, John Wiley & Sons, New York, NY, USA, 1983.
  7. J. D. Udonne, “A comparative study of recycling of used lubrication Oils using Distillation, acid and activated charcoal with clay methods,” Journal of Petroleum and Gas Engineering, vol. 2, no. 2, pp. 12–19, 2011. View at Google Scholar
  8. M. Scapin, “Recycling of used lubricating oils by Ionizing, linking hub,” Elservier.com/retrieval/pii/30969806X0700182X, 2007.
  9. J. Rincon, “Regeneration of used lubricant oil by polar solvent extraction,” Industrial & Engineering Chemistry Research, vol. 44, no. 12, pp. 4373–4379, 2005. View at Publisher · View at Google Scholar
  10. S. Boyde, “Green Lubricants. Environmental benefits and impacts of lubrication,” Green Chemistry, vol. 4, no. 4, pp. 293–307, 2002. View at Google Scholar
  11. Chevron Lubricating oil FM ISO 100.
  12. F. Awaja and D. Pavel, “Design aspects of used lubricating oil redefining,” Books.google.com.ng/books?isbn= 044452228X, p. 114, 2006.