Table of Contents

This article has been retracted as it is essentially identical in content with the published article “Elucidating of rotation speed in friction stir welding of pure copper: Thermal modeling” published in Computational Materials Science, Volume 81, January 2014, Pages 296–302.

ISRN Materials Science
Volume 2013 (2013), Article ID 978031, 5 pages
Research Article

Optimum Rotation Speed for the Friction Stir Welding of Pure Copper

1Department of Mechanical Engineering, Technical University of Denmark, Nils Koppels Allé, 2800 Kongens Lyngby, Denmark
2Department of Computer and Electrical Engineering, Michigan State University, East Lansing, MI 48824, USA

Received 24 June 2013; Accepted 14 July 2013

Academic Editors: S. Kirihara and S. Li

Copyright © 2013 Masoud Jabbari and Cem C. Tutum. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Masoud Jabbari and Cem C. Tutum, “Optimum Rotation Speed for the Friction Stir Welding of Pure Copper,” ISRN Materials Science, vol. 2013, Article ID 978031, 5 pages, 2013. doi:10.1155/2013/978031