Table of Contents
International Scholarly Research Notices
Volume 2014, Article ID 518640, 10 pages
http://dx.doi.org/10.1155/2014/518640
Research Article

Experimental Study on the Strength Characteristics and Water Permeability of Hybrid Steel Fibre Reinforced Concrete

Dr. B. R. Ambedkar National Institute of Technology, Jalandhar 144 011, India

Received 17 April 2014; Revised 31 July 2014; Accepted 31 July 2014; Published 30 October 2014

Academic Editor: John Mander

Copyright © 2014 M. P. Singh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. M. Roy, R. Malik, and P. Licastro, “Concrete durability,” ACI Material Journal, vol. 1, SP-100, pp. 625–644, 1985. View at Google Scholar
  2. F. D. Lydon and D. K. Roadley, “Effects of coarse aggregate on relative permeability of concrete,” Construction and Building Materials, vol. 8, no. 3, pp. 185–189, 1994. View at Google Scholar
  3. R. P. Khatri, V. Sirivivatnanon, and L. K. Yu, “Effect of curing on water permeability of concretes prepared with normal Portland cement and with slag and silica fume,” Magazine of Concrete Research, vol. 49, no. 180, pp. 167–172, 1997. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Kawamura and K. Tori, “Chloride permeability of concrete containing fly ash and blast furnace slag,” Material Research Society, vol. 137, pp. 411–416, 1989. View at Google Scholar
  5. S. A. Austin and P. J. Robins, “Influence of early curing on the sub-surface permeability and strength of silica fume concrete,” Magazine of Concrete Research, vol. 48, no. 5, pp. 23–34, 1997. View at Google Scholar · View at Scopus
  6. T. Ji, “Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO2,” Cement and Concrete Research, vol. 35, no. 10, pp. 1943–1947, 2005. View at Google Scholar
  7. A. R. Bagheri, M. Alibabaie, and M. Babaie, “Reduction in the permeability of plastic concrete for cut-off walls through utilization of silica fume,” Construction and Building Materials, vol. 22, no. 6, pp. 1247–1252, 2008. View at Publisher · View at Google Scholar · View at Scopus
  8. P. B. Bamforth, “The water permeability of concrete and its relationship with strength,” Magazin of Concrete Research, vol. 43, pp. 233–242, 1991. View at Google Scholar
  9. N. Hearn and G. Lok, “Measurement of permeability under uniaxial compression: a test method,” ACI Materials Journal, vol. 95, no. 6, pp. 691–694, 1998. View at Google Scholar · View at Scopus
  10. M. Hoseini, “The effect of mechanical stress on—a review,” Cement and Concrete Composites, vol. 31, no. 4, pp. 213–220, 2009. View at Google Scholar
  11. C. D. Johnston, “Steel fibre reinforced and plain concrete: Factors influencing flexural strength measurement,” ACI Materials Journal, vol. 79, no. 2, pp. 131–138, 1982. View at Google Scholar · View at Scopus
  12. T. S. Krishnamoorthy, “Flexural behavior and toughness of steel fibre reinforced concrete,” in Proceeding to International Symposium on Innovative World of Concrete (ICI-IWC '93), pp. 2.163–2.174, Madras, India, 1993.
  13. C. B. Kukreja and S. Chawla, “Flexural characteristics of steel fibre-reinforced concrete,” Indian Concrete Journal, vol. 63, no. 3, pp. 154–157, 1989. View at Google Scholar · View at Scopus
  14. G. R. Williamson, “The effect of steel fibres on the compressive strength,” in Proceedings of the International Symposium on Fibre Reinforced Concrete, SP-44, pp. 196–207, 1974.
  15. P. Balaguru and V. Ramakrishnan, “Properties of fibre reinforced concrete workability, behavior under long term loading and air characteristics,” ACI Materials Journal, vol. 85, no. 3, pp. 189–196, 1988. View at Google Scholar · View at Scopus
  16. C. D. Johonston, “Steel fibre reinforced mortar and concrete—a review of mechanical properties,” ACI Special Publication, vol. SP-44, pp. 127–142, 1974. View at Google Scholar
  17. Y. Mohammadi, S. P. Singh, and S. K. Kaushik, “Properties of steel fibrous concrete containing mixed fibres in fresh and hardened state,” Construction and Building Materials, vol. 22, no. 5, pp. 956–965, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. Y. Semsi, I. Gozde, and T. Volkan, “Effect of aspect ratio and volume fraction of steel fibre on the mechanical properties of SFRC,” in Construction and Building Materials, pp. 1250–1253, Elsevier Science, 2006. View at Google Scholar
  19. D. Singhal and A. P. Singh, “Effect of cement and fibre contents on permeability of steel fibre reinforced concrete,” Journal of Structural Engineering, vol. 28, no. 1, pp. 49–55, 2001. View at Google Scholar · View at Scopus
  20. A. P. Singh, R. Agrawal, and D. Singhal, “Permeability of steel fibre reinforced concrete,” Journal of the Institution of Engineers (India): Civil Engineering Division, vol. 82, pp. 145–149, 2001. View at Google Scholar · View at Scopus
  21. N. Ganesan and T. Sekar, “Permeability of steel fibre reinforced high performance concrete composites,” Journal of the Institution of Engineers, vol. 86, pp. 8–11, 2005. View at Google Scholar
  22. B. Gerard, “Cracking and permeability of concrete under tension,” RILEM Materials and Structures, vol. 29, no. 3, pp. 141–151, 1996. View at Google Scholar
  23. J. Rapoport, C. Aldea, S. P. Shah, B. Ankenman, and A. Karr, “Permeability of cracked steel fiber-reinforced concrete,” Journal of Materials in Civil Engineering, vol. 14, no. 4, pp. 355–358, 2002. View at Publisher · View at Google Scholar · View at Scopus
  24. P. M. Soroushian and A. Alhozaimy, “Permeability characretstics of polypropylene fibre reinforced concrete,” ACI Material Journal, vol. 92, pp. 291–295, 1995. View at Google Scholar
  25. S. P. Shah and A. E. Naaman, “Mechanical properties of glass and steel fibre reinforced mortar,” ACI Material Journal, vol. 73, no. 1, pp. 50–53, 1976. View at Google Scholar · View at Scopus
  26. K. Wang, D. C. Jansen, S. P. Shah, and A. F. Karr, “Permeability study of cracked concrete,” Cement and Concrete Research, vol. 27, no. 3, pp. 381–393, 1997. View at Publisher · View at Google Scholar · View at Scopus
  27. A. P. Singh and D. Singhal, “Effect of concrete strength on permeability of SFRC,” in Proceedings of the National Conference on “Advances in Concrete Technology, pp. 17–22, 2000.
  28. A. P. Singh and D. Singhal, “Effect of fibre content on permeability of steel fibre reinforced concrete,” in Proceedings of the 5th International Conference on Concrete Technology for Developing Countries, pp. 18–26, 1999.
  29. A. P. Singh and D. Singhal, “Permeability and strength characteristics of steel fibre reinforced concrete,” Journal of Ferro cement, vol. 32, pp. 127–137, 2002. View at Google Scholar
  30. A. P. Singh and D. Singhal, “Strength and permeability relationship of steel fibre reinforced concrete,” in Proceedings of the 35th Conference on Our World in Concrete & Structures, Singapore, 2010.
  31. A. P. Singh and D. Singhal, “Permeability of steel fibre reinforced concrete influence of fibre parameters,” in Proceedings of the 12th East Asia-Pacific Conference on Structural Engineering and Construction (EASEC '12), pp. 2823–2829, January 2011. View at Publisher · View at Google Scholar · View at Scopus
  32. A. P. Singh, “Strength and permeability characteristics of steel fibre reinforced concrete,” International Journal of Civil, Architectural science and engineering, vol. 7, no. 10, pp. 211–216, 2013. View at Google Scholar
  33. A. Sivakumar and M. Santhanam, “Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres,” Cement and Concrete Composites, vol. 29, no. 8, pp. 603–608, 2007. View at Publisher · View at Google Scholar · View at Scopus
  34. R. Hameed, A. Turatsinze, F. Duprat, and A. Sellier, “Metallic fiber reinforced concrete: effect of fiber aspect ratio on the flexural properties,” Journal of Engineering and Applied Sciences, vol. 4, no. 5, pp. 67–72, 2009. View at Google Scholar · View at Scopus
  35. S. L. Suhaendi and T. Horiguchi, “Effect of short fibers on residual permeability and mechanical properties of hybrid fibre reinforced high strength concrete after heat exposition,” Cement and Concrete Research, vol. 36, no. 9, pp. 1672–1678, 2006. View at Publisher · View at Google Scholar · View at Scopus
  36. J. S. Lawler, D. Zampini, and S. P. Shah, “Permeability of cracked hybrid fiber-reinforced mortar under load,” ACI Materials Journal, vol. 99, no. 4, pp. 379–385, 2002. View at Google Scholar · View at Scopus
  37. M. Skazlic and D. Bjegovic, “Effects of hybrid fibres on the properties of fibre-reinforced concrete,” in Proceedings of the 6th Rilem Symposium on Fibre-Reinforced Concrete (FRC '04), pp. 1381–1390, 2004.
  38. Y. Mohammadi and S. K. Kaushik, “Investigation of mechanical properties of steel fibre reinforced concrete with mixed aspect ratio of fibre,” Journal of Ferrocement, vol. 33, pp. 1–14, 2003. View at Google Scholar
  39. I.S. 1489–1991 Part-I, “Portland Pozzolana Cement—Specifications,” Bureau of Indian Standards, New Delhi, India, 1991.
  40. I.S. 383-1970, Specifications for Coarse and Fine Aggregates from Natural Sources of Concrete, Bureau of Indian Standards, New Delhi, India, 1970.
  41. A. P. Singh, Permeability and strength characteristics of steel fibre reinforced concrete [Ph.D. thesis], Punjab Technical University, 2006.
  42. M. L. Gambhir, Concrete Technology, Tata Mc-Grow Hill, Uttar Pradesh, India, 1995.
  43. IS: 3085-1965, “Method of determination of permeability of concrete,” Bureau of Indian Standards, New Delhi, India, 1965.